ON MAC4DLMT4 Sensitive gate triac Datasheet

MAC4DLM
Sensitive Gate Triacs
Silicon Bidirectional Thyristors
Designed for high volume, low cost, industrial and consumer
applications such as motor control; process control; temperature, light
and speed control.
http://onsemi.com
Features
•
•
•
•
•
•
•
•
•
TRIACS
4.0 AMPERES RMS
600 VOLTS
Small Size Surface Mount DPAK Package
Passivated Die for Reliability and Uniformity
Four−Quadrant Triggering
Blocking Voltage to 600 V
On−State Current Rating of 4.0 Amperes RMS at 93°C
Low Level Triggering and Holding Characteristics
Epoxy Meets UL 94 V−0 @ 0.125 in
ESD Ratings: Human Body Model, 3B u 8000 V
Machine Model, C u 400 V
Pb−Free Packages are Available
MT2
MARKING
DIAGRAMS
4
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Repetitive Off−State Voltage (Note 1)
(TJ = −40 to 110°C, Sine Wave,
50 to 60 Hz, Gate Open)
VDRM,
VRRM
600
V
On−State RMS Current
(Full Cycle Sine Wave, 60 Hz, TC = 93°C)
IT(RMS)
4.0
A
ITSM
40
A
I2t
6.6
A2sec
PGM
2.0
W
PG(AV)
1.0
W
Peak Gate Current
(Pulse Width ≤ 20 sec, TC = 93°C)
IGM
4.0
A
Peak Gate Voltage
(Pulse Width ≤ 20 sec, TC = 93°C)
VGM
5.0
V
Peak Non-Repetitive Surge Current
(One Full Cycle, 60 Hz, TJ = 110°C)
Circuit Fusing Consideration (t = 8.3 msec)
Peak Gate Power
(Pulse Width ≤ 10 sec, TC = 93°C)
Average Gate Power
(t = 8.3 msec, TC = 93°C)
3
YWW
AC
4DLMG
1
DPAK−3
CASE 369D
STYLE 6
2
YWW
AC
4DLMG
3
Y
WW
AC4DLM
G
=
=
=
=
Year
Work Week
Device Code
Pb−Free Package
PIN ASSIGNMENT
TJ
−40 to 110
°C
Storage Temperature Range
Tstg
−40 to 150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the device are exceeded.
August, 2010 − Rev. 5
1 2
DPAK
CASE 369C
STYLE 6
4
Operating Junction Temperature Range
© Semiconductor Components Industries, LLC, 2010
MT1
G
1
1
Main Terminal 1
2
Main Terminal 2
3
Gate
4
Main Terminal 2
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Publication Order Number:
MAC4DLM/D
MAC4DLM
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance
− Junction−to−Case
− Junction−to−Ambient
− Junction−to−Ambient (Note 2)
Maximum Lead Temperature for Soldering Purposes (Note 3)
Symbol
Max
Unit
RJC
RJA
RJA
3.5
88
80
°C/W
TL
260
°C
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted; Electricals apply in both directions)
Characteristic
Symbol
Min
Typ
Max
−
−
−
−
0.01
2.0
−
1.3
1.6
−
−
−
−
1.8
2.1
2.4
4.2
3.0
3.0
3.0
5.0
0.5
0.5
0.5
0.5
0.62
0.57
0.65
0.74
1.3
1.3
1.3
1.3
Unit
OFF CHARACTERISTICS
Peak Repetitive Blocking Current
(VD = Rated VDRM, VRRM; Gate Open)
IDRM,
IRRM
TJ = 25°C
TJ = 110°C
mA
ON CHARACTERISTICS
Peak On−State Voltage (Note 4) − (ITM = ±6.0 A)
VTM
Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 )
MT2(+), G(+)
MT2(+), G(−)
MT2(−), G(−)
MT2(−), G(+)
IGT
Gate Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 )
MT2(+), G(+)
MT2(+), G(−)
MT2(−), G(−)
MT2(−), G(+)
VGT
Gate Non−Trigger Voltage
(VD = 12 V, RL = 100 , TJ = 110°C)
MT2(+), G(+); MT2(+), G(−); MT2(−), G(−); MT2(−), G(+)
VGD
Holding Current
(VD = 12 V, Gate Open, Initiating Current = ±200 mA)
IH
Latching Current
MT2(+), G(+)
MT2(+), G(−)
MT2(−), G(−)
MT2(−), G(+)
IL
(VD = 12 V, IG = 5.0 mA)
(VD = 12 V, IG = 5.0 mA)
(VD = 12 V, IG = 5.0 mA)
(VD = 12 V, IG = 10 mA)
V
mA
V
V
0.1
0.4
−
−
1.5
15
−
−
−
−
1.75
5.2
2.1
2.2
10
10
10
10
−
3.0
−
10
−
−
mA
mA
DYNAMIC CHARACTERISTICS
Rate of Change of Commutating Current
(VD = 200 V, ITM = 1.8 A, Commutating dv/dt = 1.0 V/sec,
TJ = 110°C, f = 250 Hz, CL = 5.0 fd, LL = 80 mH, RS = 56 ,
CS = 0.03 fd) With snubber see Figure 11
di/dt(c)
Critical Rate of Rise of Off−State Voltage
(VD = 0.67 X Rated VDRM, Exponential Waveform,
Gate Open, TJ = 110°C)
A/ms
dv/dt
V/s
2. These ratings are applicable when surface mounted on the minimum pad sizes recommended.
3. 1/8″ from case for 10 seconds.
4. Pulse Test: Pulse Width ≤ 2.0 msec, Duty Cycle ≤ 2%.
ORDERING INFORMATION
Device
MAC4DLM−001
MAC4DLM−001G
MAC4DLMT4
MAC4DLMT4G
Package Type
Package
Shipping†
DPAK−3
369D
75 Units / Rail
DPAK−3
(Pb−Free)
369D
75 Units / Rail
DPAK
369C
2500 / Tape & Reel
DPAK
(Pb−Free)
369C
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2
MAC4DLM
Voltage Current Characteristic of Triacs
(Bidirectional Device)
+ Current
Symbol
Parameter
VTM
VDRM
Peak Repetitive Forward Off−State Voltage
IDRM
Peak Forward Blocking Current
VRRM
Peak Repetitive Reverse Off−State Voltage
IRRM
Peak Reverse Blocking Current
VTM
Maximum On−State Voltage
IH
Holding Current
on state
IRRM at VRRM
IH
Quadrant 3
MainTerminal 2 −
IH
off state
VTM
Quadrant Definitions for a Triac
MT2 POSITIVE
(Positive Half Cycle)
+
(+) MT2
Quadrant II
(+) MT2
(−) IGT
GATE
Quadrant I
(+) IGT
GATE
MT1
MT1
REF
REF
IGT −
+ IGT
(−) MT2
Quadrant III
(−) MT2
Quadrant IV
(+) IGT
GATE
(−) IGT
GATE
MT1
MT1
REF
REF
−
MT2 NEGATIVE
(Negative Half Cycle)
All polarities are referenced to MT1.
With in−phase signals (using standard AC lines) quadrants I and III are used.
http://onsemi.com
3
Quadrant 1
MainTerminal 2 +
+ Voltage
IDRM at VDRM
P(AV) , AVERAGE POWER DISSIPATION (WATTS)
110
= 30°
105
60°
90°
100
α
α
95
120°
= CONDUCTION ANGLE
180°
dc
90
0.5
0
1.0
1.5
2.0
3.0
2.5
3.5
α
α
120°
90°
4.0
= CONDUCTION ANGLE
3.0
2.0
60°
= 30°
1.0
0
0
1.0
0.5
2.0
1.5
3.0
2.5
3.5
Figure 1. RMS Current Derating
Figure 2. On−State Power Dissipation
TYPICAL @ TJ = 25°C
MAXIMUM @ TJ = 110°C
1.0
MAXIMUM @ TJ = 25°C
0.1
0.5
1.5
1.0
2.0
2.5
3.0
3.5
4.0
1.0
0.1
ZJC(t) = RJC(t)Sr(t)
0.01
0.1
4.0
10
1.0
100
1000
10 K
VT, INSTANTANEOUS ON-STATE VOLTAGE (VOLTS)
t, TIME (ms)
Figure 3. On−State Characteristics
Figure 4. Transient Thermal Response
1.0
7.0
VGT, GATE TRIGGER VOLTAGE (VOLTS)
8.0
I GT, GATE TRIGGER CURRENT (mA)
5.0
IT(RMS), RMS ON-STATE CURRENT (AMPS)
10
Q4
6.0
5.0
dc
180°
IT(RMS), RMS ON-STATE CURRENT (AMPS)
100
0
6.0
4.0
r(t) , TRANSIENT RESISTANCE (NORMALIZED)
I T, INSTANTANEOUS ON-STATE CURRENT (AMPS)
TC , MAXIMUM ALLOWABLE CASE TEMPERATURE ( °C)
MAC4DLM
Q3
4.0
Q2
3.0
Q1
2.0
1.0
0
-40 -25
Q4
Q1
0.8
Q2
Q3
0.6
0.4
0.2
-10
5.0
20
35
50
65
80
95
-40 -25
110
-10
5.0
20
35
50
65
80
95
TJ, JUNCTION TEMPERATURE (°C)
TJ, JUNCTION TEMPERATURE (°C)
Figure 5. Typical Gate Trigger Current versus
Junction Temperature
Figure 6. Typical Gate Trigger Voltage versus
Junction Temperature
http://onsemi.com
4
110
MAC4DLM
12
4.0
IL, LATCHING CURRENT (mA)
IH , HOLDING CURRENT (mA)
5.0
3.0
MT2 NEGATIVE
2.0
MT2 POSITIVE
1.0
10
8.0
Q2
6.0
4.0
Q4
2.0 Q1
Q3
0
-40 -25
0
-10
5.0
20
35
50
65
80
95
5.0
20
35
50
65
80
95
TJ, JUNCTION TEMPERATURE (°C)
TJ, JUNCTION TEMPERATURE (°C)
Figure 7. Typical Holding Current versus
Junction Temperature
Figure 8. Typical Latching Current versus
Junction Temperature
40
110
10
VPK = 400 V
dv/dt(c), CRITICAL RATE OF RISE OF
COMMUTATING VOLTAGE (V/ s)
VD = 400 V
TJ = 110°C
35
30
25
100°C
TJ = 110°C
90°C
1.0
20
15
MAC4DLM
10
5.0
tw
f=
1
2 tw
(di/dt)c =
VDRM
6f ITM
1000
0.1
100
1000
10 K
0
1.0
2.0
3.0
4.0
5.0
6.0
RGK, GATE-MT1 RESISTANCE (OHMS)
di/dt(c), RATE OF CHANGE OF COMMUTATING CURRENT (A/ms)
Figure 9. Minimum Exponential Static dv/dt
versus Gate−MT1 Resistance
Figure 10. Critical Rate of Rise of
Commutating Voltage
LL
200 VRMS
ADJUST FOR
ITM, 60 Hz VAC
CHARGE
1N4007
MEASURE
I
TRIGGER
CHARGE
CONTROL
NON‐POLAR
CL
TRIGGER CONTROL
STATIC dv/dt (V/ s)
-10
-40 -25
110
RS
CS
MT2
1N914 51 ADJUST FOR +
di/dt(c)
200 V
MT1
G
Note: Component values are for verification of rated (di/dt)c. See AN1048 for additional information.
Figure 11. Simplified Test Circuit to Measure the Critical Rate of Rise of Commutating Current (di/dt)c
http://onsemi.com
5
MAC4DLM
PACKAGE DIMENSIONS
DPAK
CASE 369C
ISSUE O
−T−
C
B
V
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
SEATING
PLANE
E
R
4
Z
A
S
1
2
DIM
A
B
C
D
E
F
G
H
J
K
L
R
S
U
V
Z
3
U
K
F
J
L
H
D
G
2 PL
0.13 (0.005)
M
T
INCHES
MIN
MAX
0.235 0.245
0.250 0.265
0.086 0.094
0.027 0.035
0.018 0.023
0.037 0.045
0.180 BSC
0.034 0.040
0.018 0.023
0.102 0.114
0.090 BSC
0.180 0.215
0.025 0.040
0.020
−−−
0.035 0.050
0.155
−−−
STYLE 6:
PIN 1. MT1
2. MT2
3. GATE
4. MT2
SOLDERING FOOTPRINT*
6.20
0.244
3.0
0.118
2.58
0.101
5.80
0.228
1.6
0.063
6.172
0.243
SCALE 3:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
6
MILLIMETERS
MIN
MAX
5.97
6.22
6.35
6.73
2.19
2.38
0.69
0.88
0.46
0.58
0.94
1.14
4.58 BSC
0.87
1.01
0.46
0.58
2.60
2.89
2.29 BSC
4.57
5.45
0.63
1.01
0.51
−−−
0.89
1.27
3.93
−−−
MAC4DLM
PACKAGE DIMENSIONS
DPAK−3
CASE 369D−01
ISSUE B
C
B
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
E
R
4
Z
A
S
1
2
3
−T−
SEATING
PLANE
K
J
F
D
G
H
DIM
A
B
C
D
E
F
G
H
J
K
R
S
V
Z
INCHES
MIN
MAX
0.235 0.245
0.250 0.265
0.086 0.094
0.027 0.035
0.018 0.023
0.037 0.045
0.090 BSC
0.034 0.040
0.018 0.023
0.350 0.380
0.180 0.215
0.025 0.040
0.035 0.050
0.155
−−−
MILLIMETERS
MIN
MAX
5.97
6.35
6.35
6.73
2.19
2.38
0.69
0.88
0.46
0.58
0.94
1.14
2.29 BSC
0.87
1.01
0.46
0.58
8.89
9.65
4.45
5.45
0.63
1.01
0.89
1.27
3.93
−−−
3 PL
0.13 (0.005)
M
STYLE 6:
PIN 1.
2.
3.
4.
T
MT1
MT2
GATE
MT2
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
7
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MAC4DLM/D
Similar pages