MADP-000234-10720T MELF PIN Diode RoHS Compliant Rev. V3 Absolute Maximum Ratings1,2 @ 25°C Parameter Absolute Maximum Forward Voltage 0.85 V Reverse Voltage -500 V Operating Temperature -55°C to +150°C Storage Temperature -55°C to +175°C Mounting Temperature +260°C for 360 seconds Case Style ODS 1072 Cathode 1. Exceeding these limits may cause permanent damage to the device. 2. Values will de-rate over temperature. B A Solderable Surfaces A C Size Inches (mm) Case Style A (sq) Min./Max. B Min./Max. C Min./Max. 1072 0.080/0.095 (2.032/2.413) 0.115/0.135 (2.921/3.429) 0.008/0.030 (.203/.762) All tolerances are ± .001” (± .025 mm). Handling Procedures The following precautions should be observed to avoid damaging these devices. Cleanliness and Storage RoHS These devices should be handled and stored in a clean environment. Ends of the device are tin plated for greater solderability. Continuous exposure to high humidity (>80%) for extended periods may cause the surface to oxidize. Caution should be taken when storing devices for long periods. The MADP-000234-10720T is fully RoHS compliant meaning it contains less than the maximum allowable concentration of 0.1% by weight in homogenous materials for lead, hex chrome, mercury, PBB, PBDE, and 0.01% for cadmium. ESD Mounting Techniques These devices are susceptible to ESD and are rated Class 1. General Handling Device can be handled with tweezers or vacuum pickups and are suitable for use with automatic pick-and-place equipment. Solder Attach Typical wave soldering or reflow techniques may be used to mount M/A-COM’s SMQ packages to circuit boards using Sn63/Pb37 alloy or RoHS compliant solders. For more information visit the M/A-COM website and read application note M538 at:http:// www.macom.com/FileMapServlet/redirect.red? o=M538&t=0 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MADP-000234-10720T MELF PIN Diode RoHS Compliant Rev. V3 Electrical Specifications @ TA = +25°C Part Number MADP-000234-10720T Minimum Reverse 2 Voltage Maximum Capacitance Maximum Series Res. IR <10μA Volts 500 CT @100V f = 1MHz pF 1.5 RS @100mA f = 100MHz Ω 0.25 CW Power Dissipation Rating Watts 3.0 Nominal Characteristics Typical IF When RS = 75Ω mA — Carrier 3 Lifetime I-Region Width μS 3.0 mils 50.0 Notes 1. Rs is measured on an HP4191A Impedance Analyzer 2. Minority Carrier Lifetime Measured at from 50% Control Voltage to 50 % Output Voltage. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.