UOT MAL-6001E-E08 The led strip signage light module is comprised of a linear array of solid state light emitting diode Datasheet

MAL-6001X-X08
Unity Opto Technology Co., Ltd.
Description
Features
The LED Strip signage light module is comprised of a linear
l
LED-based solid state lighting module
array of solid state light emitting diodes ( LEDs ) mounted
l
Long operation life and low power requirement
on an elongated printed circuit board. This board is encased
l
High reliability in wide operating temp.
inside a translucent plastic hosing, which is sealed at its two
l
Wide viewing angle and uniform appearance
ends.The LED Strip unit has interconnects at each end, which
l
Easy modular interconnectivity
allows for easy modular interconnectivity, either to a power
l
High luminous intensity
source or an adjacent LED Strip unit.
Applications
A series of these LED Strip units can be mounted end-to-end
l
Focused Reading & Task Lighting
along the roof or edge of a building to produce a bright,
l
Uninterrupted Emergency Lighting
continuous contour of light, similar to neon, but consuming
l
Concealed Accent Lighting
only a fraction of the power that neon consumes.
l
Edge Lighting
LED Strip is made with an advanced optical grade high
Options
strength acrylic lens, which offers superior high temperature
l
and moisture resistance performance in outdoor environments.
Available with Low Voltage Disconnect
Battery Protection Circuit
The high strength acrylic extrusion lens material is tough and
l
Special Operating Voltages
impact resistant. In addition, the high strength arcylic lens
l
Choice of Narrow (15oC) , Medium (30oC) or
is doped with UV-a and UV-b inhibitors to reduce the effects
Wide Angle (120oC) LEDs
of long-term exposure to direct sunlight.
LED Strip is available in a variety of colors:red, yellow,
orange, green, and blue. It is easily installed on any surface
with minimal surface penetration and is built to withstand
the harshest environments.
The LEDStrip is made in custom lengths to order, and all
fittings can be nearly concealed. Thus, each installation
is customized for a location.
1/4
12/27/2002
MAL-6001X-X08
Unity Opto Technology Co., Ltd.
Package Dimensions
2/4
12/27/2002
MAL-6001X-X08
Unity Opto Technology Co., Ltd.
Mechanical Characteristics
Outside Diameter
Typical
Units
Semicircular
26.0
mm
Typical
Units
Red-Orange-Yellow
12
V (AC)
Blue-Green
24
V (AC)
Red-Orange-Yellow
1.20
A / 8feet
Blue-Green
0.88
A / 8feet
Red, Yellow, Orange
14.40
W / 8feet
Blue, Green
21.12
W / 8feet
920
g / 8feet
Electrical Characteristics
Parameter
Voltage
Current
Power Dissipation (Pd)
Weight
Temperature Ratings
Storage Temperature
Power Supply
-20oC to + 85oC
All other components
-40 C to + 100 C
o
o
Operating Temperature
3/4
o
o
Power Supply
-10 C to + 60 C
All other components
-40oC to + 85oC
12/27/2002
MAL-6001X-X08
Unity Opto Technology Co., Ltd.
Optical Characteristics
Dominant Wavelength (λ dom)
Typical
Units
Red
625
nm
Yellow
592
nm
Orange
605
nm
Green
525
nm
Blue
470
nm
Luminous (L)
Typical
Units
Red
180
cd/m2
Yellow
220
cd/m2
Orange
180
cd/m2
Green
160
cd/m2
Blue
130
cd/m2
Note :
1.Test device : SPECTRASCAN (made by POTO RESEARCH PR-650)
2.Test condition : Test 60cm light bar by photometer and record the intensity per 3cm.
Selection Guide
Part Number
Color
Unit
MAL-6001R-R08
Red
feet
MAL-6001Y-Y08
Yellos
feet
MAL-6001E-E08
Orange
feet
MAL-6001G-G08
Green
feet
MAL-6001B-B08
Blue
feet
Note:
MAL-6001X-X08 ( 08 → eight feet)
LED Color Tube Color
4/4
12/27/2002
Similar pages