Vishay MAL217576688E3 Aluminum capacitors high temperature solid electrolytic smd Datasheet

175 TMP
Vishay BCcomponents
Aluminum Capacitors
High Temperature Solid Electrolytic SMD
FEATURES
• Polarized aluminum electrolytic capacitors SMD,
solid electrolyte MnO2
• Extremely long useful life, 20 000 h/125 °C
RoHS
COMPLIANT
• High temperature, usable up to 175 °C
• Excellent impedance and ESR behavior, at low and high
temperature
• Charge and discharge proof, application with 0 Ω
resistance allowed
• Reverse DC voltage up to 0.5 x UR allowed
• AC voltage up to 0.8 x UR allowed
• High shock and vibration capability
• High ripple current per volume in SMD
Fig.1 Component outline
140 CRH
125 °C
175 °C
solid SMD
175 TMP
standard
153 CRV
high
temperature
150 CRZ
APPLICATIONS
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Nominal case sizes (L x W x H in mm)
8 x 8 x 10
1 to 68 µF
Rated capacitance range, CR
± 20 %
Tolerance on CR
4 to 40 V
Rated voltage range, UR
Rated temperature range
- 55 to + 85 °C
Category temperature range:
- 55 to + 125 °C
UC1 = 4 to 25 V
- 55 to + 175 °C
UC2 = 4 to 16 V
Endurance test at 175 °C
1000 hours
Endurance test at 125 °C
10 000 hours
Useful life at 175 °C
2000 hours
Useful life at 125 °C
20 000 hours
> 300 000 hours
Useful life at 40 °C, IR applied
Shelf life at 0 V, 125 °C
500 h
Based on sectional specification
IEC 60384-4/EN130300
Climatic category IEC 60068
55/175/56
• SMD technology
• Smoothing, filtering, buffering
• Telecommunications, professional industrial, EDP, high
end power conversion
• Power supplies, SMPS for telecommunications
PACKAGING
Supplied in blister tape on reel.
MARKING
•
•
•
•
Rated capacitance (in µF)
Rated voltage (in V)
Date code, in accordance with IEC 60062
Black mark or ‘-’ sign indicating the cathode (the anode is
identified by bevelled edges)
• Code indicating group number (V) HT
SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES
CR
(µF)
1
2.2
3.3
4.7
6.8
10
15
22
33
47
68
www.vishay.com
74
4
6.3
10
4
6.3
10
4
6.3
10
0810
0810
0810
-
0810
0810
-
UR (V) at Tamb = 85 °C
16
UC1 (V) at Tamb = 125 °C
16
UC2 (V) at Tamb = 175 °C
16
0810
-
20
25
40
20
25
25
16
16
0810
-
0810
0810
0810
0810
-
16
0810
0810
-
For technical questions, contact: [email protected]
Document Number: 28305
Revision: 04-Nov-08
175 TMP
Aluminum Capacitors
Vishay BCcomponents
High Temperature Solid Electrolytic SMD
Table 1
TAPE AND REEL DIMENSIONS in millimeters
CASE CODE
PITCH
P1
TAPE WIDTH
W
TAPE THICKNESS
T2
REEL DIA.
PACKAGING
QUANTITY
PER REEL
0810
16
24
11
380
500
Table 2
DIMENSIONS in millimeters AND MASS (see Fig.2)
NOMINAL
CASE SIZE
LxWxH
CASE
CODE
Lmax.
Wmax.
Hmax.
ØD
Bmax.
S
C
MASS
(g)
8.0 x 8.0 x 10.0
0810
8.4
8.4
10.7
8.0
1
4.7
2.2 ± 0.2
≈ 0.8
MOUNTING
L
0.4 ± 0.2
The capacitors are designed for automatic placement on to
printed-circuit boards.
Optimum dimensions of soldering pads depend amongst
others on soldering method, mounting accuracy, print layout
and/or adjacent components.
For recommended soldering pad dimensions, refer to Fig.3
and Table 3.
+
WB
C
S
C
D
SOLDERING
Soldering conditions are defined by the curve, temperature
versus time, where the temperature is that measured on the
soldering pad during processing.
Resistant against 260 °C reflow temperature; see Fig.4.
Any temperature versus time curve which does not exceed
the specified maximum curves may be applied.
H
0.3
max.
+
-
Table 3
Fig.2 Dimensional outline
RECOMMENDED SOLDERING PAD
DIMENSIONS in millimeters
CASE CODE
a
b
c
0810
3.0
2.5
4.0
300
250
b
Tpad (°C)
200
a
c
a
Fig.3 Recommended soldering pad dimensions
150
100
50
0
AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION
SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE
GOOD SOLDERING CONNECTIONS.
Document Number: 28305
Revision: 04-Nov-08
0
50
100
150
200
250
300
t (s)
Fig.4 Maximum temperature load during infrared reflow soldering
measured on the soldering pad
For technical questions, contact: [email protected]
www.vishay.com
75
175 TMP
Vishay BCcomponents
Aluminum Capacitors
High Temperature Solid Electrolytic SMD
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
Electrolytic capacitor 175 TMP series
DESCRIPTION
CR
rated capacitance at 100 Hz, tolerance ± 20 %
47 µF/6.3 V; ± 20 %
typical RMS ripple current no necessary
DC voltage applied
Nominal case size: 8 x 8 x 10 mm; taped on reel
IR
IL5
typical leakage current after 5 minutes at UR
ESR
typical equivalent series resistance at 100 kHz
Ordering code: MAL2 175 73479 E3
Former 12NC: 2222 175 73479
ZF RES
typical impedance at average
resonance frequency
Lead (Pb)-free terminations
Note
Unless otherwise specified, all electrical values in Table 4 apply at
Tamb = 20 °C, P = 86 to 106 kPa, RH = 45 to 75 %
Table 4
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
UC1
125 °C
(V)
UC2
175 °C
(V)
CR
(µF)
NOMINAL
CASE SIZE
LxWxH
(mm)
IR
100 kHz
175 °C
(mA)
IR
100 kHz
40 °C
(mA)
IL5
5 min
(mA)
TYP.
ESR
100 kHz
(Ω)
TYP.
ZF RES
(Ω)
TYP.
ZF RES
(MHz)
ORDERING
CODE
MAL2175.......
4
4
4
68
8.0 x 8.0 x 10.0
426
2660
5
0.15
0.11
0.65
72689E3
33
8.0 x 8.0 x 10.0
426
2660
4
0.15
0.1
0.71
73339E3
6.3
6.3
6.3
47
8.0 x 8.0 x 10.0
413
2580
5
0.16
0.11
0.73
73479E3
15
8.0 x 8.0 x 10.0
234
1460
3
0.5
0.25
2.0
74159E3
22
8.0 x 8.0 x 10.0
301
1880
3
0.31
0.22
2.0
74229E3
10
10
10
16
16
16
10
8.0 x 8.0 x 10.0
186
1160
3
0.79
0.38
3.2
75109E3
20
20
16
6.8
8.0 x 8.0 x 10.0
142
890
2
1.31
0.69
5.1
78688E3
3.3
8.0 x 8.0 x 10.0
91
653
2
2.0
0.7
7.7
76338E3
4.7
8.0 x 8.0 x 10.0
131
740
2
1.6
0.63
6.4
76478E3
6.8
8.0 x 8.0 x 10.0
139
870
4
1.33
0.52
4.95
76688E3
10
8.0 x 8.0 x 10.0
186
1160
4
0.79
0.38
3.2
76109E3
1.0
8.0 x 8.0 x 10.0
94
590
2
3.12
0.86
9.6
77108E3
2.2
8.0 x 8.0 x 10.0
112
700
2
2.16
0.74
7.5
77228E3
25
40
25
25
www.vishay.com
76
16
16
For technical questions, contact: [email protected]
Document Number: 28305
Revision: 04-Nov-08
175 TMP
Aluminum Capacitors
Vishay BCcomponents
High Temperature Solid Electrolytic SMD
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Voltage
Us ≤ 1.15 x UR
Surge voltage
Reverse voltage
Tamb = 85 °C:
at UR = 4 to 16 V
Urev < 0.5 UR
at UR = 20 V
Urev < 0.4 UR
at UR = 25 to 40 V
Urev < 0.3 UR
Tamb = 125 °C:
at UR = 4 to 16 V
Urev < 0.4 UR
at UR = 20 V
Urev < 0.2 UR
at UR = 25 to 40 V
Urev < 0.1 UR
Tamb = 175 °C:
at UR = 4 to 16 V
Urev < 0.3 UR
at UR = 20 V
Urev < 0.15 UR
at UR = 25 to 40 V
Urev < 0.1 UR
Maximum peak AC voltage
Reverse voltage applied
≤2V
Maximum peak AC voltage, without
Tamb = 85 °C:
reverse voltage applied
at f ≤ 0.1 Hz
0.30 x UR
at 0.1 Hz < f ≤ 1 Hz
0.45 x UR
at 1 Hz < f ≤ 10 Hz
0.60 x UR
at 10 Hz < f ≤ 50 Hz
0.65 x UR
at f > 50 Hz
0.80 x UR
85 °C < Tamb ≤ 125 °C:
at f ≤ 0.1 Hz
0.15 x UR
at 0.1 Hz < f ≤ 1 Hz
0.22 x UR
at 1 Hz < f ≤ 10 Hz
0.30 x UR
at 10 Hz < f ≤ 50 Hz
0.32 x UR
at f > 50 Hz
0.40 x UR
125 °C ≤ Tamb ≤ 175 °C:
at f < 50 Hz
0.1 x UR
at f > 50 Hz
0.2 x UR
Inductance
Equivalent series inductance (ESL)
Case sizes (mm):
8 x 8 x 10
typ. 9 to 14 nH
Case sizes (mm):
Pmax. = P125 mW
8 x 8 x 10
350
After 5 minutes at UR and Tamb = 25 °C
see Table 4
Dissipation
Maximum power dissipation
Current
Maximum leakage current
Document Number: 28305
Revision: 04-Nov-08
For technical questions, contact: [email protected]
www.vishay.com
77
175 TMP
Aluminum Capacitors
High Temperature Solid Electrolytic SMD
Vishay BCcomponents
VOLTAGE
LEAKAGE CURRENT
102
40
(1)
(2)
35
UR
(V)
I
I0
10
25
20
16
1
10
(1)
UC1 = 125 °C
(1)
UC2 = 175 °C
6.3
4
10-1
0
- 50
0
50
85
100
125
150 175
Tamb (°C)
Fig.5 Maximum permissible voltage up to Tamb = 175 °C
- 40
0
40
160
Tamb (°C)
I0 = leakage current during continuous operation at UR and Tamb = 25 °C
80
120
Fig.8 Typical multiplier of leakage current as a function of
ambient temperature
CAPACITANCE (C)
EQUIVALENT SERIES RESISTANCE (ESR)
1.2
Curve 1: 47 µF, 4 V
Curve 2: 33 µ, 6.3 V
Curve 3: 22 µ, 10 V
10
1.1
Standard deviationσ
C
C0
1.0
0.9
0.8
0.05
σ
3
2
1
1
0.1
0
0.7
0.01
0.6
- 80
ESR
(W)
- 40
0
40
80
120
10 2
160
200
Tamb (°C)
Fig.6 Typical multiplier of capacitance and standard deviation
as functions of ambient temperature
10 3
10 4
10 5
10 6
f (Hz)
Tamb = 125 °C
Fig.9 Typical ESR as a function of frequency at 125 °C
DISSIPATION FACTOR (tan δ)
ESR 1.5
ESR0 1.4
2.0
Standard deviation σ
tan δ
tan δ0
1.5
1.0
1.3
1.2
1.1
1
0.9
0.8
0.5
0.5
0.7
d
0
0
0.6
0.5
- 80
- 40
0
40
80
120
160
200
Tamb (°C)
tan d0 = dissipation factor at Tamb = 25 °C and 100 Hz
Fig.7 Typical multiplier of dissipation factor and standard deviation
as functions of ambient temperature
www.vishay.com
78
- 50
0
50
100
150 175
Tamb (°C)
Fig.10 ESR correction multiplier as a function of temperature
For technical questions, contact: [email protected]
Document Number: 28305
Revision: 04-Nov-08
175 TMP
Aluminum Capacitors
Vishay BCcomponents
High Temperature Solid Electrolytic SMD
IMPEDANCE (Z)
RIPPLE CURRENT (IR)
Applying the maximum RMS ripple current given in below table will
cause a device temperature of 175 °C.
Z 1.5
Z0
1.4
1.3
1.2
Tamb
1.1
PARAMETER
40 °C 85 °C 105 °C 125 °C 150 °C 175 °C
1
0.9
IR multiplier;
100 kHz
0.8
1.0
0.87
0.78
0.67
0.5
0.16
0.7
0.6
0.5
- 50
50
0
100
150 175
Tamb (°C)
Fig.11 Z correction multiplier as a function of temperature
Table 5
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Mounting
Endurance
PROCEDURE
(quick reference)
REFERENCE
IEC 60384-18,
subclause 4.3
IEC 60384-4/
EN130300
subclause 4.13
shall be performed prior to tests mentioned below;
reflow soldering;
for maximum temperature load
refer to chapter “Mounting”
ΔC/C: ± 10 %
Tamb = 125 °C;
UR = 4 to 25 V with UR applied;
UR = 40 V with UC applied;
10 000 h
ΔC/C: ± 10 %
Tamb = 175 °C;
UR = 4 to 16 V with UR applied; UR = 20 to 40 V
with UC applied; 1000 h
Useful life
CECC 30302
subclause 1.8.1
REQUIREMENTS (1)
Tamb = 175 °C; IR applied and:
UR = 4 to 16 V with UR applied;
UR = 20 and 40 V with UC applied;
2000 h
tan δ ≤ spec. limit
IL2 ≤ spec. limit
tan δ ≤ 1.2 x spec. limit
Z ≤ 1.2 x spec. limit
IL5 ≤ spec. limit
ΔC/C: ± 15 %
tan δ ≤ 1.5 x spec. limit
Z ≤ 1.5 x spec. limit
IL5 ≤ spec. limit
no short or open circuit,
no visible damage
total failure percentage: < 1 %
Shelf life (2)
Charge and
discharge
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 125 °C; no voltage applied;
500 h
IEC 60384-4-2
subclause 9.21
106 cycles without series resistance:
0.5 s to UR;
0.5 s to ground
ΔC/C: ± 10 %
tan δ ≤ 1.2 x spec. limit
IL5 ≤ 1 x spec. limit
ΔC/C: ± 5 %
no short or open circuit,
no visible damage
Notes
(1) Specification limits on request
(2) MSL acc. J-STD-020D is not specified
Document Number: 28305
Revision: 04-Nov-08
For technical questions, contact: [email protected]
www.vishay.com
79
175 TMP
Aluminum Capacitors
High Temperature Solid Electrolytic SMD
Vishay BCcomponents
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Solvent resistance
Vibration
REFERENCE
PROCEDURE
(quick reference)
IEC 60068-2-45,
test XA
IEC 60653
immersion: 5 ± 0.5 min with or without ultrasonic at
55 ± 5 °C
IEC 60068-2-6
test Fc
10 to 2000 Hz; 1.5 mm or 20 g;
1 octave/min; 3 directions;
2 h per direction; no voltage applied
REQUIREMENTS (1)
visual appearance not affected
solvents: demineralized water and/or calgonite
solution (20 g/l)
no intermittent contacts
no breakdown
no open circuiting
no mechanical damage
ΔC/C: ± 5 %
tan δ ≤ 1.2 x spec. limit
Z ≤ 1.2 x spec. limit
IL5 ≤ 1.5 x spec. limit
Shock
IEC 60068-2-27
test Ea
half-sine or sawtooth pulse shape; 50 g; 11 ms;
3 successive shocks in each direction of 3 mutually
perpendicular axes;
no voltage applied
no intermittent contacts
no breakdown
no open circuiting
no mechanical damage
ΔC/C: ± 5 %
tan δ ≤ 1.2 x spec. limit
Z ≤ 1.2 x spec. limit
IL5 ≤ 1.5 x spec. limit
Bump
Passive
flammability
IEC 60384-4/
EN 130300
subclass 4.9
40 g; 2 directions; 4000 bumps total
IEC 60695-2-2
capacitor mounted to a vertical printed-circuit
board,
one flame on capacitor body;
Tamb = 20 to 25 °C;
test duration = 20 s
no visible damage
ΔC/C: ± 5 % with respect to initial
measurement
after removing the test flame from the
capacitor, the capacitor must not
continue to burn for more than 15 s
no burning particles must drop from the
sample
Notes
(1) Specification limits on request
(2) MSL acc. J-STD-020D is not specified
www.vishay.com
80
For technical questions, contact: [email protected]
Document Number: 28305
Revision: 04-Nov-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages