MAPDCC0011
Low Cost Two-Way GMIC SMT Power Divider
824 – 960 MHz
Features
Small Size and Low Profile
Industry Standard SOT-26 SMT Plastic Package
Typical Insertion Loss: 0.6 dB
Typical Isolation: 15 dB
1 Watt Power Handling
Lead-Free SOT-26 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of DS52-0008
Rev. V2
Functional Diagram
Description
M/A-COM’s MAPDCC0011 is an IC-based
monolithic power divider using M/A-COM’s GMIC
technology in a low cost SOT-26 plastic package.
This 2-way power divider is ideally suited for
applications where small size, low insertion loss,
superior phase/amplitude tracking and low cost are
required. Typical applications
include personal
communication systems and other communication
applications where size and PCB real estate are at a
premium. Available in tape and reel.
Pin Configuration
Pin No.
Function
Pin No.
Function
1
RF1
4
GND
2
GND
5
RF IN
3
RF2
6
GND
The MAPDCC0011 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and
reliability.
Ordering Information
Part Number
Package
MAPDCC0011
Bulk Packaging
MAPDCC0011-TR
1000 piece reel
MAPDCC0011-TB
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
1
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0011
Low Cost Two-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
Electrical Specifications: TA = 25°C1
Parameter
Units
Min
Typ
Max
Insertion Loss Above 3.0 dB
dB
—
0.6
0.8
Isolation
dB
13
15
—
VSWR Input
RF1, RF2 Outputs
—
—
—
—
1.3:1
1.3:1
1.4:1
1.5:1
Amplitude Balance
dB
—
0.1
0.25
Deg.
—
3
5
Phase Balance
1. All specifications apply with a 50-ohm source and load impedance.
Absolute Maximum Ratings
Parameter
3.
4.
Recommended PCB Configuration
Absolute Maximum
4
2.
2,3
Input Power
1W CW
Operating Temperature
-40°C to +85°C
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
With internal load dissipation of 0.125 W maximum.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0011
Low Cost Two-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
Typical Performance Curves @ 25ºC
Insertion Loss vs. Frequency
(Dashed lines show amplitude balance window)
VSWR vs. Frequency
Insertion Loss vs. Frequency
(Dashed lines show Amplitude Balance window)
VSWR vs. Frequency
2
Insertion Loss dB
0
VSWR
-0.25
-0.5
-0.75
1.6
1.4
1.2
-1
824
858
892
926
1
824
960
Isolation vs. Frequency
892
926
960
926
960
Phase Balance vs. Frequency
(Relative to RF1)
Phase Balance vs. Frequency
(Relative to RF1)
Isolation vs. Frequency
0
Phase, degrees
0
-5
-10
-15
-20
824
858
Frequency MHz
Frequency MHz
Isolation dB
Input
Output
1.8
-2
-4
-6
-8
-10
824
858
892
Frequency MHz
926
960
858
892
Frequency MHz
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0011
Low Cost Two-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
Lead-Free SOT-26†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0011
Low Cost Two-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support