MACOM MAVC-060103-130400 Synthesizer , smt 400 mhz Datasheet

Synthesizer , SMT
400 MHz
MAVC-060103-130400
Rev: C
Features
♦
♦
♦
♦
RoHS Compliant
Fully Integrated VCO, PLL, Loop Filter
High Performance, Low Cost
Miniature SMT Package (LSM6)
Description
This synthesizer design integrates a high performance VCO, PLL,
IC and discrete loop filter in a surface mount package. This SMT
package provides electrical shielding, easy PCB assembly and repeatable performance. The synthesizer is designed for use in wireless base stations.
M/A-COM synthesizers are manufactured in an ISO9001 certified
facility, incorporating surface mount assembly and automated electrical testing. This ensures consistent electrical performance and
quality over volume production quantities.
Electrical Specifications1:
TA = +25°C, Z0 = 50 Ohms, Vcc1 = 5V, Vcc2 = 3.3V.
Parameter
Test Conditions
Units
Frequency Range
Over Top 2
MHz
RF Output Power
Over Top 2
dBm
Phase Noise
SSB at 100 Hz offset from carrier
SSB at 1 kHz offset from carrier
SSB at 10 kHz offset from carrier
SSB at 100 kHz offset from carrier
SSB at 1000 kHz offset from carrier
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-83
-83
-110
-130
-148
-80
-80
-105
-127
-145
dBc
-25
-20
dBc
dBc
-73
-85
-70
-80
Harmonic Suppression
Spurious Suppression
(Non-Harmonic)
Phase comparison frequency
Other spurious
Reference breakthrough
Min
Typ
Max
400
-3.0
+3.0
dBc
-80
Frequency Lock Time
Over Fout , +/- 500Hz
mS
20
30
VCO Supply Current (ICC1)
Recommended operating condition
mA
27
30
PLL Supply Current (ICC2)
Recommended operating condition
mA
9
10
VCO Power Supply (VCC1)
Recommended operating condition
V
4.75
5.0
5.25
PLL Power Supply (VCC2)
Recommended operating condition
V
3.1
3.3
3.5
1. All specification limits are indicated values @ +25 ºC and apply over Fout unless otherwise stated.
2. See “Absolute Maximum Ratings” for Top.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use.
or application of any product(s) or information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Synthesizer , SMT
400 MHz
MAVC-060103-130400
Electrical Specifications1: (cont’d)
Parameter
Test Conditions
Units
Step Size (ΔF)
Recommended operating limit
kHz
Reference Frequency (FR)
1.0 V pp ± 0.2V square wave with input filter
MHz
Min
Typ
Max
1000
6
10
PLL Programming
3-wire serial CMOS IAW ADF4113, Charge Pump max current
Logic high = VCC2 x 0.8 Min and Logic low = VCC2 x 0.2 Max
PLL Lock Monitor Output
Locked = VCC2 - 0.4 Min , Unlocked = 0.4V Max
100
Absolute Maximum Ratings
TA = +25°C
Pin Configuration
Pin No.
Function
Pin No.
Function
Parameter
Absolute Maximum
1
VCC2
8
GND
VCO Supply Voltage (VCC1)
-0.3V to 6.5 V
2
GND
9
Lock Detect
PLL Supply Voltage (VCC2)
-0.3V to 6.5 V
3
REF I/P
10
Clock
Reference Frequency Level
-0.3V to 6.5 V
4
GND
11
Data
VCC1
12
Load Enable
Data, Clock, Strobe
Voltages
-0.3V to Vcc + 0.3 V
5
6
GND
13
GND
Operating Temperature
-40°C to +85°C
7
RF O/P
14
GND
Storage Temperature
-45°C to +120°C
Solder Assembly
Temperature
See App Note M2032
Functional Block Diagram
Weight
TO CONTROLLER
GND
LOAD ENABLE
VCC2
3
4
5
DATA
GND
CLOCK
REF IN
LOCK DETECT
GND
GND
VCC1
1. Operation of this device above any one of these parameters
may cause permanent damage.
2. As per JEDEC-STD-020.
11
10
Environmental Specifications
9
Devices are designed to function after exposure to the
shock, vibration, thermal shock and moisture conditions
typically encountered in base station and other infrastructure environments.
8
10nF
6
RF OUT
GND
7
GND
14
Class 1
12
10nF
2
2
ESD Rating
13
1
Moisture Sensitivity Level
3.0 grams
2
50R
Ordering Information
1. The diagram above shows a typical application.
2. The Reference input and RF output are internally AC coupled.
3. The diagram applies when digital lock detect is selected. For
analog open-drain mode, a filter is required.
Part Number
MAVC-060103-130400
Package
Tape and Reel (300/Reel) 1
1. See application note M513.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use.
or application of any product(s) or information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Synthesizer , SMT
400 MHz
MAVC-060103-130400
Recommended PCB Layout
1.
2.
3.
Tolerance: ±0.1mm
Both views are shown from top of device.
Crossed hatched areas to be left clear. These areas may have active vias.
Outline Drawing
1.
2.
3.
4.
5.
Plating: Au, 0.05μm — 0.15μm over Ni barrier of 2.5μm — 5.0μm.
Internal Solder: Sn95.5/Ag4.0/Cu0.5, lead free.
Substrate: FR4
Cover: mild steel
Tolerance: ±0.2mm unless otherwise noted.
ECO History
Rev
3
Date
Description
By
A
Dec 8th 2005
B
Dec 15th 2005 Change of the reference frequency specification from Min=10, Typ=, to Min=6, Typ=10,
Create datasheet
JS
C
Feb 20th 2005 Change of 1000kHz SSB Phase noise from Typically
Change of 1000kHz SSB Phase noise from Max
JS
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use.
or application of any product(s) or information.
JS
–150 to –148dBc/Hz,
-147 to -145dBc/Hz.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Similar pages