Maxim MAX3093EESE ±15kv esd-protected, 10mbps, 3v/5v, low-power quad rs-422/rs-485 receiver Datasheet

19-1779; Rev 2; 10/02
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
____________________________Features
♦ ESD Protection
±15kV—IEC 1000-4-2 Air-Gap Discharge
±8kV—IEC 1000-4-2 Contact Discharge
±15kV—Human Body Model
♦ Guaranteed Propagation-Delay Tolerance
Between All ICs
±8ns (MAX3093E)
±10ns (MAX3094E)
♦ Single +3V Operation (MAX3094E)
Single +5V Operation (MAX3093E)
♦ 16-Pin TSSOP
♦ 10Mbps Data Rate
♦ Allow up to 128 Receivers on the Bus
♦ 1nA Low-Power Shutdown Mode
♦ 2.4mA Operating Supply Current
♦ Pin-Compatible Upgrades to ’34C86
The MAX3093E/MAX3094E are pin-compatible, lowpower upgrades to the industry-standard ’34C86. They
are available in space-saving TSSOP, narrow SO, and
PDIP packages.
________________________Applications
Telecommunications Equipment
Rugged RS-422/RS-485/RS-423 Bus Receiver
Receivers for ESD-Sensitive Applications
Level Translators
________________Functional Diagram
VCC
ENBD
_______________Ordering Information
PART
MAX3093ECUE
MAX3093ECSE
MAX3093ECPE
MAX3093EEUE
MAX3093EESE
MAX3093EEPE
MAX3094ECUE
MAX3094ECSE
MAX3094ECPE
MAX3094EEUE
MAX3094EESE
MAX3094EEPE
TEMP RANGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
MAX3093E
MAX3094E
ENAC
PIN-PACKAGE
16 TSSOP
16 Narrow SO
16 Plastic DIP
16 TSSOP
16 Narrow SO
16 Plastic DIP
16 TSSOP
16 Narrow SO
16 Plastic DIP
16 TSSOP
16 Narrow SO
16 Plastic DIP
Pin Configuration
A+
YA
A
TOP VIEW
AB+
A
B
YB
A- 1
16 VCC
A+ 2
15 B-
B-
YA 3
C+
ENAC 4
C
YC
D
YD
YC 5
CC
D+
D-
14 B+
MAX3093E
MAX3094E
GND
12 ENBD
C+ 6
11 YD
C- 7
10 D+
GND 8
B
13 YB
9
D
D-
TSSOP/SO/DIP
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX3093E/MAX3094E
________________General Description
The MAX3093E/MAX3094E are rugged, low-power,
quad, RS-422/RS-485 receivers featuring electrostatic
discharge (ESD) protection for use in harsh environments. All receiver inputs are protected to ±15kV using
IEC 1000-4-2 Air-Gap Discharge, ±8kV using IEC 10004-2 Contact Discharge, and ±15kV using the Human
Body Model. The MAX3093E operates from a +5V supply, while the MAX3094E operates from a +3.3V supply.
Receiver propagation delays are guaranteed to within
±8ns of a predetermined value, thereby ensuring
device-to-device matching across production lots.
The devices feature a 1nA low-power shutdown mode
in which the receiver outputs are high impedance.
When active, these receivers have a fail-safe feature
that guarantees a logic-high output if the input is open
circuit. They also have a quarter-unit-load input impedance that allows 128 receivers on a bus.
MAX3093E/MAX3094E
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VCC).............................................................+7V
Control Input Voltage (ENAC, ENBD).........-0.3V to (VCC + 0.3V)
Receiver Input Voltage (_+, _-)............................................±25V
Receiver Output Voltage (Y_).....................-0.3V to (VCC + 0.3V)
Output Short-Circuit Duration (Y_, one output) ..........Continuous
Continuous Power Dissipation (TA = +70°C)
TSSOP (derate 9.4mW/°C above +70°C) ....................755mW
SO (derate 8.7mW/°C above +70°C) ...........................696mW
Plastic DIP (derate 10.5mW/°C above +70°C) ............762mW
Operating Temperature Ranges
MAX309_EC_ _ ..................................................0°C to +70°C
MAX309_EE_ _ ...............................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS—MAX3093E
(VCC = +5V ±5%, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = +5.0V, TA = +25°C.) (Note 1)
PARAMETER
Receiver Differential Input
Threshold
SYMBOL
VTH
Receiver Input Hysteresis
Receiver Input Current (_+, _-)
CONDITIONS
MIN
-7V ≤ VCM ≤ 12V
-200
VCM = 0
IIN
VCC = 0 or 5.25V
TYP
MAX
UNITS
200
mV
45
mV
VIN = 12V
250
VIN = -7V
-200
Enable Input Current
(ENAC/ENBD)
±1
µA
µA
Enable Input High Voltage
(ENAC/ENBD)
VIH
Enable Input Low Voltage
(ENAC/ENBD)
VIL
Receiver Output High Voltage
VOH
IOUT = -4mA, VID = 200mV,
output enabled, Figure 1
Receiver Output Low Voltage
VOL
IOUT = 4mA, VID = -200mV,
output enabled, Figure 1
0.4
V
Three-State Current at Receiver
Output
IOZR
0 ≤ VOUT ≤ VCC, output disabled
±1
µA
Output Short-Circuit Current
IOSR
0 ≤ VOUT ≤ VCC, output enabled
±7
±75
mA
Receiver Input Resistance
RIN
-7V ≤ VCM ≤ 12V
48
Supply Current
ICC
ESD Protection
(Note 2)
2
2.0
V
0.8
No load, output enabled
Output disabled
VCC - 1.5
V
V
kΩ
2.4
3.5
mA
0.001
10
µA
Human Body Model
±15
IE C1000-4-2 Air-Gap Discharge
±15
IE C1000-4-2 Contact Discharge
±8
_______________________________________________________________________________________
kV
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
(VCC = +5V ±5%, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = +5.0V, TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
VCC = +5V ±5%, TA = TMIN to TMAX
VCC = 5.25V
Input-to-Output Propagation
Delay
tPLH, tPHL
|VID| = 3V,
Figure 2
VCC = 4.75V
Device-to-Device PropagationDelay Matching
TYP
65
TA = +85°C
78
TA = +70°C
76
TA = +25°C
71
MAX
UNITS
98
86
94
92
79
87
TA = -40°C
65
73
81
TA = +85°C
82
90
98
TA = +70°C
80
TA = +25°C
74
82
90
TA = -40°C
68
76
84
ns
96
|VID| = 3V, Figure 2, matched conditions
16
ns
Propagation-Delay Skew
(tPLH - tPHL)
tSK
Figure 2
-2
±10
ns
Output Enable Time to
Low Level
tZL
Figure 3
600
800
ns
Output Enable Time to
High Level
tZH
Figure 3
600
800
ns
Output Disable Time from
Low Level
tLZ
Figure 3
60
100
ns
Output Disable Time from
High Level
tHZ
Figure 3
60
100
ns
Maximum Data Rate
fMAX
10
Mbps
DC ELECTRICAL CHARACTERISTICS—MAX3094E
(VCC = +3.0V to +3.6V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = +3.3V, TA = +25°C.) (Note 1)
PARAMETER
Receiver Differential Input
Threshold
SYMBOL
VTH
Receiver Input Hysteresis
Receiver Input Current (_+, _-)
CONDITIONS
MIN
-7V ≤ VCM ≤ 12V
-200
VCM = 0
IIN
VCC = 0 or 3.6V
TYP
MAX
UNITS
200
mV
45
mV
VIN = 12V
250
VIN = -7V
-200
Enable Input Current
(ENAC/ENBD)
±1
Enable Input High Voltage
(ENAC/ENBD)
VIH
Enable Input Low Voltage
(ENAC/ENBD)
VIL
Receiver Output High Voltage
VOH
2.0
VCC - 0.4
µA
V
0.8
IOUT = -1.5mA, VID = 200mV,
output enabled, Figure 1
µA
V
V
_______________________________________________________________________________________
3
MAX3093E/MAX3094E
SWITCHING CHARACTERISTICS—MAX3093E
MAX3093E/MAX3094E
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
DC ELECTRICAL CHARACTERISTICS—MAX3094E (continued)
(VCC = +3.0V to +3.6V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = +3.3V, TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Receiver Output Low Voltage
VOL
IOUT = 2.5mA, VID = -200mV,
output enabled, Figure 1
0.4
V
Three-State Current at Receiver
Output
IOZR
0 ≤ VOUT ≤ VCC, output disabled
±1
µA
Output Short-Circuit Current
IOSR
0 ≤ VOUT ≤ VCC, output enabled
±4
±60
mA
Receiver Input Resistance
RIN
-7V ≤ VCM ≤ 12V
48
2.4
4.0
mA
0.001
10
µA
Supply Current
ICC
ESD Protection
(Note 2)
No load, outputs enabled
Outputs disabled
kΩ
Human Body Model
±15
IEC 1000-4-2 Air-Gap Discharge
±15
IEC 1000-4-2 Contact Discharge
±8
kV
SWITCHING CHARACTERISTICS—MAX3094E
(VCC = +3.0V to +3.6V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = +3.3V, TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
VCC = +3.3V ±5%, TA = TMIN to TMAX
VCC = 3.60V
Input-to-Output Propagation
Delay
tPLH, tPHL
|VID| = 3V,
Figure 2
VCC = 3.00V
Device-to-Device PropagationDelay Matching
TYP
69
TA = +85°C
88
TA = +70°C
86
TA = +25°C
78
MAX
UNITS
123
98
108
106
88
98
TA = -40°C
69
79
89
TA = +85°C
103
113
123
TA = +70°C
100
TA = +25°C
91
101
111
TA = -40°C
82
92
102
ns
120
|VID| = 3V, Figure 2, matched conditions
20
ns
Propagation-Delay Skew
(tPLH - tPHL)
tSK
Figure 2
-1
±10
ns
Output Enable Time to
Low Level
tZL
Figure 3
600
1000
ns
Output Enable Time to
High Level
tZH
Figure 3
600
1000
ns
Output Disable Time from
Low Level
tLZ
Figure 3
80
180
ns
Output Disable Time from
High Level
tHZ
Figure 3
80
180
ns
Maximum Data Rate
fMAX
10
Note 1: All currents into the device are positive; all currents out of the device are negative. All voltages are referred to device
ground, unless otherwise noted.
Note 2: Receiver inputs (_+, _-).
4
_______________________________________________________________________________________
Mbps
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
-30
-20
MAX3094E
20
15
10
0.9
MAX3094E
-10
1
2
3
4
0.6
0.5
0.4
MAX3094E
0.3
MAX3093E
1
2
3
4
-40
5
-15
10
35
60
OUTPUT LOW VOLTAGE (V)
OUTPUT HIGH VOLTAGE (V)
TEMPERATURE (°C)
OUTPUT HIGH VOLTAGE
vs. TEMPERATURE
SUPPLY CURRENT vs. TEMPERATURE
SHUTDOWN SUPPLY CURRENT
vs. TEMPERATURE
3
MAX3094E
2
2.6
MAX3093E/MAX3094E
2.4
2.2
1
IOUT = -8mA
2.0
35
60
-15
MAX3093E
MAX3094E
5
10
35
60
85
-40
-15
TEMPERATURE (°C)
TEMPERATURE (°C)
VID = 3V
CL = 15pF
110
100
90
80
10
35
60
85
TEMPERATURE (°C)
MAX3094E
PROPAGATION DELAY vs. TEMPERATURE
140
130
PROPAGATION DELAY (ns)
MAX3093/94E-07
MAX3093E
PROPAGATION DELAY vs. TEMPERATURE
120
10
0
-40
85
15
MAX3093/94E-08
10
PROPAGATION DELAY (ns)
-15
85
MAX3093/94E-06
2.8
SUPPLY CURRENT (mA)
4
20
SHUTDOWN SUPPLY CURRENT (nA)
MAX3093E
MAX3093/94E-05
3.0
MAX3093/94E-04
5
-40
0.7
0
0
5
0.8
0.1
0
0
IOUT = 8mA
0.2
5
0
OUTPUT HIGH VOLTAGE (V)
MAX3093E
1.0
MAX3093/94E-03
25
OUTPUT CURRENT (mA)
-40
MAX3093/94E-02
MAX3093E
OUTPUT CURRENT (mA)
30
MAX3093/94E-01
-50
0
OUTPUT LOW VOLTAGE
vs. TEMPERATURE
OUTPUT CURRENT vs.
OUTPUT HIGH VOLTAGE
OUTPUT LOW VOLTAGE (V)
OUTPUT CURRENT vs.
OUTPUT LOW VOLTAGE
VID = 3V
CL = 15pF
120
110
100
90
70
80
-40
-15
10
35
TEMPERATURE (°C)
60
85
-40
-15
10
35
60
85
TEMPERATURE (°C)
_______________________________________________________________________________________
5
MAX3093E/MAX3094E
Typical Operating Characteristics
(VCC = +5V for MAX3093E, VCC = +3.3V for MAX3094E, TA = +25°C, unless otherwise noted.)
MAX3093E/MAX3094E
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
Typical Operating Characteristics (continued)
(VCC = +5V for MAX3093E, VCC = +3.3V for MAX3094E, TA = +25°C, unless otherwise noted.)
SHUTDOWN TIMING
MAX3093/94E TOC09
MAX3093E
Y VOLTAGE
5V/div
2V/div
MAX3094E
Y VOLTAGE
G VOLTAGE
2V/div
TIME (200ns/div)
CIRCUIT OF FIGURE 3,
S1 OPEN, S2 CLOSED, S3 = 1V
Pin Description
6
PIN
NAME
FUNCTION
1
A-
Inverting Receiver A Input
2
A+
Noninverting Receiver A Input
3
YA
Receiver A Output. Enabled when ENAC = high. YA will be logic high if A+ > A- by 200mV, and low if
A+ < A- by 200mV. It will be logic high if A+ and A- remain floating. Otherwise, the state is undetermined.
YA goes high impedance when ENAC = low.
4
ENAC
5
YC
Receiver C Output. Same functionality as YA.
6
C+
Noninverting Receiver C Input
7
C-
Inverting Receiver C Input
8
GND
9
D-
Inverting Receiver D Input
10
D+
Noninverting Receiver D Input
11
YD
Receiver D Output. Enabled when ENBD = high. YD will be logic high if D+ > D- by 200mV, and low if
D+ < D- by 200mV. It will be a logic high if D+ and D- remain floating. Otherwise, the state is undetermined.
YD goes high impedance when ENBD = low.
12
ENBD
13
YB
Receiver B Output. Same functionality as YD.
14
B+
Noninverting Receiver B Input
15
B-
Inverting Receiver B Input
16
VCC
Receiver Output A and C Enable High. A logic high on this input enables receivers A and C.
Ground
Receiver Output B and D Enable High. A logic high on this input enables receivers B and D.
Positive Supply
_______________________________________________________________________________________
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
VID
MAX3093E/MAX3094E
|VID| = 3V
OUT
R
CL
15pF
VID
R
ENAC = VCC or ENBD = VCC
VOL
VOH
IOL
(+)
IOH
(-)
3.0V
IN
1.5V
1.5V
0
tPHL
tPLH
VCC
Figure 1. Receiver VOH and VOL
VCC/2
OUT
VCC/2
0
Figure 2. Receiver Propagation Delay
S1
S3
+1V
VCC
1kΩ
-1V
VID
R
S2
ENAC,
ENBD
CL
15pF
3V
ENAC
ENBD
1.5V
1.5V
0
tZH
3V
ENAC
ENBD
tHZ
0
tLZ
tZL
VCC
VOH
OUT
0.25V
OUT
VCC/2
VCC/2
VOL
0
S1 OPEN
S2 CLOSED
S3 = 1V
0.25V
S1 CLOSED
S2 OPEN
S3 = -1V
Figure 3. Receiver Enable and Disable Times
_______________________________________________________________________________________
7
MAX3093E/MAX3094E
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
_______________Detailed Description
±15kV ESD Protection
As with all Maxim devices, ESD-protection structures are
incorporated on all pins to protect against ESDs encountered during handling and assembly. The
MAX3093E/MAX3094E receiver inputs have extra
protection against static electricity found in normal
operation. Maxim’s engineers have developed stateof-the-art structures to protect these pins against ±15kV
ESD without damage. After an ESD event, the
MAX3093E/MAX3094E continue working without latchup.
ESD protection can be tested in several ways. The
receiver inputs are characterized for protection to the
following:
• ±15kV using the Human Body Model
• ±8kV using the Contact Discharge Method specified
in IEC 1000-4-2 (formerly IEC 801-2)
• ±15kV using the Air-Gap Method specified in
IEC 1000-4-2 (formerly IEC 801-2)
ESD Test Conditions
ESD performance depends on a number of conditions.
Contact Maxim for a reliability report that documents
test setup, methodology, and results.
Human Body Model
Figure 4a shows the Human Body Model, and Figure
4b shows the current waveform it generates when discharged into a low impedance. This model consists of a
100pF capacitor charged to the ESD voltage of interest,
which is then discharged into the device through a
1.5kΩ resistor.
IEC 1000-4-2
Since January 1996, all equipment manufactured and/or
sold in the European community has been required to
meet the stringent IEC 1000-4-2 specification. The IEC
1000-4-2 standard covers ESD testing and performance
of finished equipment; it does not specifically refer to integrated circuits. The MAX3093E/MAX3094E help you
design equipment that meets Level 4 (the highest level) of
IEC 1000-4-2, without additional ESD-protection components.
The main difference between tests done using the
Human Body Model and IEC 1000-4-2 is higher peak
current in IEC 1000-4-2. Because series resistance is
lower in the IEC 1000-4-2 ESD test model (Figure 5a), the
ESD-withstand voltage measured to this standard is generally lower than that measured using the Human Body
Model. Figure 5b shows the current waveform for the
±8kV IEC 1000-4-2 Level 4 ESD Contact Discharge test.
The Air-Gap test involves approaching the device with a
charge probe. The Contact-Discharge method connects
the probe to the device before the probe is energized.
Machine Model
The Machine Model for ESD testing uses a 200pF storage capacitor and zero-discharge resistance. It mimics
the stress caused by handling during manufacturing
and assembly. All pins (not just RS-485 inputs) require
this protection during manufacturing. Therefore, the
Machine Model is less relevant to the I/O ports than are
the Human Body Model and IEC 1000-4-2.
Low-Power Shutdown Mode
The function tables show the functionality of the enable
inputs. The MAX3093E/MAX3094E enter shutdown
when ENAC and ENBD are low. In shutdown, all outputs go high impedance and the devices typically draw
less than 1nA. The devices exit shutdown by taking
either ENAC or ENBD high. The typical shutdown exit
time is 600ns.
Function Tables
(IN+ - IN-)
OUTPUT
YA OR YC
DEVICE
MODE
X
≥ 200mV
1
On
X
≤ -200mV
0
On
1
X
Open
1
On
0
1
X
High-Z
On
0
0
X
High
Shutdown
ENBD
ENAC
(IN+ - IN-)
OUTPUT
YB OR YD
DEVICE
MODE
1
X
≥ 200mV
1
On
1
X
≤ -200mV
0
On
1
X
Open
1
On
0
1
X
High-Z
On
0
0
X
High-Z
Shutdown
ENAC
ENBD
1
1
X = don’t care, High-Z = high impedance
8
_______________________________________________________________________________________
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
CHARGE-CURRENT
LIMIT RESISTOR
HIGHVOLTAGE
DC
SOURCE
Cs
100pF
RC
50MΩ to 100MΩ
DISCHARGE
RESISTANCE
CHARGE-CURRENT
LIMIT RESISTOR
DEVICE
UNDER
TEST
STORAGE
CAPACITOR
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
DEVICE
UNDER
TEST
I
100%
90%
PEAK-TO-PEAK RINGING
(NOT DRAWN TO SCALE)
IPEAK
Ir
Cs
150pF
RD
330Ω
Figure 5a. IEC 1000-4-2 ESD Test Model
Figure 4a. Human Body ESD Test Model
IP 100%
90%
HIGHVOLTAGE
DC
SOURCE
MAX3093E/MAX3094E
RD
1.5kΩ
RC
1MΩ
AMPERES
36.8%
10%
0
10%
0
tRL
TIME
tDL
CURRENT WAVEFORM
Figure 4b. Human Body Model Current Waveform
tr = 0.7ns to 1ns
t
30ns
60ns
Figure 5b. IEC 1000-4-2 ESD-Generator Current Waveform
_______________________________________________________________________________________
9
MAX3093E/MAX3094E
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
Applications Information
Propagation-Delay Matching
The MAX3093E/MAX3094E exhibit propagation delays
that are closely matched from one device to another,
even between devices from different production lots. This
feature allows multiple data lines to receive data and
clock signals with minimal skewing with respect to each
other. The MAX3093E receiver propagation delays are
trimmed to a predetermined value ±8ns, while the
MAX3094E delays are trimmed to a predetermined value
±10ns.
VCC
1kΩ
A
150Ω
B
128 Receivers on the Bus
The standard RS-485 input impedance is 12kΩ (oneunit load). The standard RS-485 transmitter can drive
32 unit loads. The MAX3093E/MAX3094E present a 1/4unit-load input impedance (48kΩ), which allows up to
128 receivers on a bus. Any combination of these RS485 receivers with a total of 32-unit loads can be connected to the same bus.
MAX3093E
MAX3094E
1kΩ
Figure 6. External Fail-Safe Implementation
Fail-Safe Implementation
The MAX3093E/MAX3094E receiver inputs guarantee a
logic high output when the inputs are open circuit (no
termination resistor used). This occurs when the transmitter is removed from the bus or when all transmitter
outputs are high impedance. However, when the line is
terminated and the transmitters are disabled, the differential voltage between the A and B inputs falls below
the ±200mV RS-485 sensitivity threshold. Consequently, the outputs become undefined. To maintain a failsafe receiver output while using a terminating resistor,
input A must be biased at least 200mV above input B.
The resistor-divider network shown in Figure 6 is recommended.
10
Chip Information
TRANSISTOR COUNT: 676
______________________________________________________________________________________
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
TSSOP4.40mm.EPS
______________________________________________________________________________________
11
MAX3093E/MAX3094E
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
DIM
A
A1
B
C
e
E
H
L
N
E
H
INCHES
MILLIMETERS
MAX
MIN
0.069
0.053
0.010
0.004
0.014
0.019
0.007
0.010
0.050 BSC
0.150
0.157
0.228
0.244
0.016
0.050
MAX
MIN
1.35
1.75
0.10
0.25
0.35
0.49
0.19
0.25
1.27 BSC
3.80
4.00
5.80
6.20
0.40
SOICN .EPS
MAX3093E/MAX3094E
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
1.27
VARIATIONS:
1
INCHES
TOP VIEW
DIM
D
D
D
MIN
0.189
0.337
0.386
MAX
0.197
0.344
0.394
MILLIMETERS
MIN
4.80
8.55
9.80
MAX
5.00
8.75
10.00
N MS012
8
AA
14
AB
16
AC
D
A
B
e
C
0 -8
A1
L
FRONT VIEW
SIDE VIEW
PROPRIETARY INFORMATION
TITLE:
PACKAGE OUTLINE, .150" SOIC
APPROVAL
DOCUMENT CONTROL NO.
21-0041
12
______________________________________________________________________________________
REV.
B
1
1
±15kV ESD-Protected, 10Mbps, 3V/5V,
Low-Power Quad RS-422/RS-485 Receivers
PDIPN.EPS
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________13
© 2002 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
MAX3093E/MAX3094E
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
Similar pages