Maxim MAX4542CSA Low-voltage, single-supply dual spst/spdt analog switch Datasheet

19-1202; Rev 3; 8/02
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
________________________Applications
____________________________Features
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
Low RON: 60Ω max (33Ω typ)
RON Matching Between Channels: 2Ω max
RON Flatness: 6Ω max
Guaranteed Charge Injection: 5pC max
+2.7V to +12V Single-Supply Operation
Low Power Consumption: <5µW
Low Leakage Current Over Temperature:
10nA max at +85°C
Fast Switching: tON = 35ns, tOFF = 25ns
Guaranteed Break-Before-Make
(MAX4543/MAX4544 only)
TTL/CMOS-Logic Compatible
Pin Compatible with MAX323/MAX324/MAX325
MAX4541/42/43 Available in SOT23-8
MAX4544 Available in SOT23-6
Ordering Information
PART
PINPACKAGE
TEMP RANGE
TOP
MARK
MAX4541CUA
0°C to +70°C
8 µMAX
—
Battery-Operated Systems Test Equipment
MAX4541CSA
0°C to +70°C
8 SO
—
Sample-and-Hold Circuits
Communications Systems
MAX4541CPA
0°C to +70°C
8 Plastic DIP
—
Heads-Up Displays
+3V/+5V DACs and ADCs
MAX4541C/D
0°C to +70°C
Dice*
—
Guidance and Control
Systems
PBX, PABX
MAX4541EKA-T
-40°C to +85°C
8 SOT23-8
MAX4541EGA
-40°C to +85°C
8 QFN
—
MAX4541EUA
-40°C to +85°C
8 µMAX
—
MAX4541ESA
-40°C to +85°C
8 SO
—
Audio and Video
Switching
Cell Phones
Ultrasound
Pagers
Military Radios
AAAE
Ordering Information continued at end of data sheet.
*Dice are specified at TA = +25°C.
Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
MAX4544
MAX4544
MAX4544
PIN 6
NO
1
8
V+
IN
1
6
NO
COM
2
7
IN
V+
2
5
COM
NC
3
6
N.C.
GND
3
4
NC
GND
4
5
N.C.
MAX4541/MAX4542/MAX4543
APPEAR AT END OF DATA SHEET.
5
4
AAAM
1
2
3
SOT23-6*
µMAX/SO/DIP/QFN
N.C. = NOT INTERNALLY CONNECTED
6
*NOTE: SOT23-6 PACKAGE
HAS LETTERING NEAREST PIN 6
LOGIC
MAX4544
NC
NO
0
1
ON
OFF
OFF
ON
SWITCHES SHOWN FOR "0" INPUT
________________________________________________________________ Maxim Integrated Products
For pricing delivery, and ordering information please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX4541–MAX4544
General Description
The MAX4541–MAX4544 are precision, dual analog
switches designed to operate from a single +2.7V to +12V
supply. Low power consumption (5µW) makes these parts
ideal for battery-powered equipment. These switches offer
low leakage currents (100pA max) and fast switching
speeds (tON = 150ns max, tOFF = 100ns max).
When powered from a +5V supply, the MAX4541–
MAX4544 offer 2Ω max matching between channels, 60Ω
max on-resistance (RON), and 6Ω max RON flatness.
These switches also offer 5pC max charge injection and
a minimum of 2000V ESD protection per Method 3015.7.
The MAX4541/MAX4542/MAX4543 are dual single-pole/
single-throw (SPST) devices and the MAX4544 is a singlepole/double-throw (SPDT) device. The MAX4541 has two
normally open (NO) switches and the MAX4542 has two
normally closed (NC) switches. The MAX4543 has one NO
and one NC switch and can be used as an SPDT, while
the MAX4544 is an SPDT. The MAX4541/MAX4542/
MAX4543 are available in tiny SOT23-8 and QFN-8 packages, and the MAX4544 is available in a SOT23-6 package.
MAX4541–MAX4544
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to GND
V+ .........................................................................-0.3V to +13V
IN_, COM_, NC_, NO_ (Note 1)..................-0.3V to (V+ + 0.3V)
Continuous Current (any terminal)....................................±10mA
Peak Current, COM_, NO_, NC_
(pulsed at 1ms, 10% duty cycle max) ............................±20mA
ESD per Method 3015.7 ..................................................>2000V
Continuous Power Dissipation
SOT23-6 (derate 7.1mW/°C above +70°C)....................571mW
SOT23-8 (derate 5.3mW/°C above +70°C)....................421mW
QFN (derate 24.4mW/°C above +70°C) ......................1951mW
µMAX (derate 4.10mW/°C above +70°C) ......................330mW
Narrow SO (derate 5.88mW/°C above +70°C) ..............471mW
Plastic DIP (derate 9.09mW/°C above +70°C) ..............727mW
Operating Temperature Ranges
MAX454_C_ _ .......................................................0°C to +70°C
MAX454_E_ _.....................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on NC, NO, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum
current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +5V ±10%, GND = 0, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) (Notes 2, 3)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
V+
V
ANALOG SWITCH
Analog Signal Range
On-Resistance
On-Resistance Match
Between Channels (Note 5)
On-Resistance Flatness
(Note 6)
NO or NC Off-Leakage
Current (Note 7)
VCOM,
VNO,
VNC
(Note 4)
V+ = 4.5V,
ICOM = 1.0mA,
VNO or VNC = 3.5V
V+ = 5V,
∆RON
ICOM = 1.0mA,
VNO or VNC = 3.5V
V+ = 5V;
RFLAT(ON) ICOM = 1.0mA;
VNO or VNC = 1V, 2V, 3V
RON
INO(OFF)
or
INC(OFF)
V+ = 5.5V;
VCOM = 1V, 4.5V;
VNO or VNC = 4.5V, 1V
COM Off-Leakage Current
(Note 7)
V+ = 5.5V;
ICOM(OFF) VCOM = 4.5V, 1V;
VNO or VNC = 1V, 4.5V
COM On-Leakage Current
(Note 7)
V+ = 5.5V;
VCOM = 1V, 4.5V or
VNO or VNC = 1V, 4.5V,
or floating
2
ICOM(ON)
0
TA = +25°C
30
TA = TMIN to TMAX
75
TA = +25°C
0.8
TA = TMIN to TMAX
2
TA = TMIN to TMAX
TA = +25°C
TA = +25°C
TA = TMIN
to TMAX
C, E
TA = +25°C
TA = TMIN
to TMAX
6
8
-0.1
C, E
2
4
TA = +25°C
TA = TMIN
to TMAX
60
0.01
Ω
Ω
Ω
0.1
-5
5
-0.1
0.1
-5
5
-0.2
0.2
-10
10
nA
nA
nA
C, E
_______________________________________________________________________________________
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
(V+ = +5V ±10%, GND = 0, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) (Notes 2, 3)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
35
100
UNITS
DYNAMIC
Turn-On Time
tON
VNO or VNC = 3V,
Figure 2
TA = +25°C
Turn-Off Time
tOFF
VNO or VNC = 3V,
Figure 2
TA = +25°C
Break-Before-Make Time
Delay (Note 4)
Charge Injection
(Note 4)
Off-Isolation (Note 8)
tD
Q
OIRR
COM Off-Capacitance
COM On-Capacitance
240
25
TA = TMIN to TMAX
MAX4543/MAX4544 only, RL = 300Ω, CL = 35pF
75
150
2
CL = 1.0nF, VGEN = 0, RGEN = 0, TA = +25°C,
Figure 4
RL = 50Ω, CL = 5pF, f = 1MHz, TA = +25°C,
Figure 5
RL = 50Ω, CL = 5pF, f = 1MHz, TA = +25°C,
Figure 6
10
1
ns
ns
ns
5
pC
-76
dB
-90
dB
f = 1MHz, TA = +25°C, Figure 7
8
pF
CCOM(OFF) f = 1MHz, TA = +25°C, Figure 7
8
pF
Crosstalk (Note 9)
NC or NO Capacitance
TA = TMIN to TMAX
COFF
CCOM(ON)
f = 1MHz, TA = +25°C,
Figure 7
MAX4541/2/3
13
MAX4544
20
pF
SUPPLY
Power-Supply Range
V+
Positive Supply Current
I+
2.7
V+ = 5.5V, VIN = 0 or V+, all channels on or off
-1
0.0001
12
V
1
µA
0.8
V
LOGIC INPUT
Input Voltage Low
VINL
Input Voltage High
VINH
2.4
V
_______________________________________________________________________________________
3
MAX4541–MAX4544
ELECTRICAL CHARACTERISTICS—Single +5V Supply (continued)
MAX4541–MAX4544
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
ELECTRICAL CHARACTERISTICS—Single +3.3V Supply
(V+ = +3.0V to +3.6V, GND = 0, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) (Notes 2, 3)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
V+
V
ANALOG SWITCH
Analog Signal Range
Channel On-Resistance
VCOM,
VNO,
VNC
RON
(Note 3)
V+ = 3V,
ICOM = 1.0mA,
VNO or VNC = 1.5V
0
TA = +25°C
50
125
Ω
TA = TMIN to TMAX
275
DYNAMIC
Turn-On Time (Note 3)
tON
VNO or VNC = 1.5V
Turn-Off Time (Note 3)
tOFF
VNO or VNC = 1.5V
TA = +25°C
80
TA = TMIN to TMAX
500
TA = +25°C
50
TA = TMIN to TMAX
Break-Before-Make Time
Delay (Note 3)
tD
MAX4543/MAX4544 only, RL = 300Ω, CL = 35pF,
TA = +25°C
Charge Injection (Note 3)
Q
CL = 1.0nF, VGEN = 0, RGEN = 0, TA = +25°C
I+
V+ = 3.6V, VIN = 0 or V+, all channels on or off
400
125
175
2
30
1
ns
ns
ns
5
pC
1
µA
SUPPLY
Positive Supply Current
-1
Note 2: QFN and SOT-packaged parts are 100% tested at +25°C only and guaranteed by correlation at the full hot rated temperature.
Note 3: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 4: Guaranteed by design.
Note 5: ∆RON = ∆RON max - ∆RON min.
Note 6: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Note 7: Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25°C.
Note 8: Off Isolation = 20log10 [VCOM ⁄ (VNC or VNO)], VCOM = output, VNC or VNO = input to off switch.
Note 9: Between the two switches, MAX4541/MAX4542/MAX4543 only.
4
_______________________________________________________________________________________
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
160
A
40
30
C
30
D
20
E
B
C
A:
B:
C:
D:
E:
10
10
0
0
2
4
6
8
10
0
12
1
2
TURN-ON/OFF TIMES
vs. TEMPERATURE
20
0
0
5
50
tON
tOFF
10
12
MAX4541-05
V- = +5V
7
5
1
ICOM(ON)
0.1
4
3
ICOM/IN(OFF)
2
0.01
1
0
0.001
-55 -35 -15
5
25
45
65
85 105 125
-55
-30
TEMPERATURE (°C)
1000
180
900
-20
135
800
-30
90
700
-40
45
ON-PHASE
I+ (nA)
225
ON-LOSS
PHASE (DEGREES)
0
-60
-45
-70
-90
300
-135
200
-180
100
-225
0
50Ω IN AND OUT
V+ = +5V
-90
-100
0.1
1
10
FREQUENCY (MHz)
100
1
2
3
4
5
TEMPERATURE (°C)
VCOM (V)
INPUT VOLTAGE vs. SUPPLY CURRENT
TOTAL HARMONIC DISTORTION
vs. FREQUENCY
500
0
0
95 120 125
600
-50
OFF-LOSS
70
1
THD (%)
MAX4541-07
45
MAX4541-08
FREQUENCY RESPONSE
20
-5
MAX4541-09
0
LOSS (dB)
8
6
10
-80
6
CHARGE INJECTION vs. COM VOLTAGE
Q (pC)
ON/OFF-LEAKAGE (nA)
60
-10
4
8
10
70
20
2
VSUPPLY (V)
V+ = +5.5V
80
tON/tOFF (ns)
40
100
MAX4541-04
V+ = +5V
30
tOFF
ON/OFF-LEAKAGE CURRENT
vs. TEMPERATURE
100
40
80
VCOM (V)
VCOM (V)
90
4
100
60
TA = +125°C
TA = +85°C
TA = +25°C
TA = -40°C
TA = -55°C
3
tON
120
MAX4541-06
20
140
B
tON/tOFF (ns)
RON (Ω)
RON (Ω)
A
40
50
V+ = +5V
180
50
60
0
200
MAX4541-03
A: V+ = +3V
B: V+ = +5V
C: V+ = +12V
MAX4541-02
60
MAX4541-01
80
70
TURN-ON/OFF TIMES vs.
SUPPLY VOLTAGE
ON-RESISTANCE vs.
COM VOLTAGE OVER TEMPERATURE
ON-RESISTANCE vs. COM VOLTAGE
400
IV+
0
1
2
3
VIN (V)
4
5
0.1
10
100
1k
10k
FREQUENCY (Hz)
_______________________________________________________________________________________
5
MAX4541–MAX4544
__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
MAX4541–MAX4544
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
Pin Description
1
1 —
—
1
MAX4541
PIN
MAX4542
1
—
MAX4543
—
NO1
MAX4544
DIP/SO/
DIP/SO/
DIP/SO/
DIP/SO/
µMAX/ SOT23-8 µMAX/ SOT23-8 µMAX/ SOT23-8 µMAX/ SOT23-6
QFN
QFN
QFN
QFN
1
1
—
—
1
1
—
—
Analog Switch 1—Normally Open
NAME
FUNCTION
NO1
Analog Switch 1—Normally Open
2
8
2
8
2
8
—
—
COM1
3
3
3
3
3
3
—
—
IN2
Analog Switch 1—Common
4
6
4
6
4
6
4
3
GND
Ground—Negative Supply Input
5
5
—
—
—
—
—
—
NO2
Analog Switch 2—Normally Open
6
4
6
4
6
4
—
—
COM2
7
7
7
7
7
7
—
—
IN1
Digital Control Input 1
Positive Supply Voltage Input
Digital Control Input 2
Analog Switch 2—Common
8
2
8
2
8
2
8
2
V+
—
—
1
1
—
—
—
—
NC1
Analog Switch 1—Normally Closed
—
—
5
5
5
5
—
—
NC2
Analog Switch 2—Normally Closed
—
—
—
—
—
—
1
6
NO
—
—
—
—
—
—
2
5
COM
—
—
—
—
—
—
3
4
NC
—
—
—
—
—
—
5, 6
—
N.C.
—
—
—
—
—
—
7
1
IN
Analog Switch—Normally Open
Analog Switch—Common
Analog Switch—Normally Closed
Not Connected (open circuit)
Digital Control Input
Applications Information
POSITIVE SUPPLY
D1
V+
NO
COM
Vg
Logic Levels
The MAX4541–MAX4544 are TTL compatible when
powered from a single +5V supply. When powered
from other supply voltages, TTL compatibility is guaranteed and the logic inputs can be driven Rail-to-Rail®.
For example, with a +12V supply, IN1 and IN2 can be
driven low to 0 and high to 12V. With a +3.3V supply,
IN1 and IN2 should be driven low to 0 and high to
3.3V.
Driving IN1 and IN2 rail-to-rail minimizes power consumption.
GND
D2
Figure 1. Overvoltage Protection Using Two External Blocking
Diodes
Analog Signal Levels
Analog signals that range over the entire supply voltage
(V+ to GND) can be switched with very little change in
on-resistance over the entire voltage range (see Typical
Operating Characteristics). All the switches are bidirectional, so the NO_, NC_, and COM_ pins can be used
as either inputs or outputs.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
6
_______________________________________________________________________________________
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
Do not exceed the absolute maximum ratings because
stresses beyond the listed ratings may cause permanent damage to the devices.
Proper power-supply sequencing is recommended for
all CMOS devices. Always apply V+ before applying
analog signals or logic inputs, especially if the analog
or logic signals are not current limited. If this sequencing is not possible, and if the analog or logic inputs are
not current limited to <10mA, add a small-signal diode
(D1) as shown in Figure 1. If the analog signal can dip
below GND, add D2. Adding protection diodes
reduces the analog signal range to a diode drop (about
0.7V) below V+ (for D1), and to a diode drop above
ground (for D2). Leakage is unaffected by adding the
diodes. On-resistance increases by a small amount at
low supply voltages. Maximum supply voltage (V+)
must not exceed 13V.
Adding protection diodes causes the logic thresholds
to be shifted relative to the power-supply rails. This can
be significant when low supply voltages (+5V or less)
are used. With a +5V supply, TTL compatibility is not
guaranteed when protection diodes are added. Driving
IN1 and IN2 all the way to the supply rails (i.e., to a
diode drop higher than the V+ pin, or to a diode drop
lower than the GND pin) is always acceptable.
Protection diodes D1 and D2 also protect against
some overvoltage situations. With Figure 1’s circuit, if
the supply voltage is below the absolute maximum rating, and if a fault voltage up to the absolute maximum
rating is applied to an analog signal pin, no damage
will result.
Test Circuits/Timing Diagrams
MAX4541
MAX4542
MAX4543
MAX4544
V+
SWITCH
INPUT
SWITCH
OUTPUT
V+
COM
NO
or NC
LOGIC
INPUT
50%
0
VOUT
RL
1k
CL
35pF
t OFF
IN
VOUT
GND
LOGIC
INPUT
SWITCH
OUTPUT
0V
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL
VOUT = VCOM
RL + RON
(
)
t r < 20ns
t f < 20ns
+3V
0.9 · V0UT
0.9 · VOUT
0
t ON
LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES
THAT HAVE THE OPPOSITE LOGIC SENSE.
Figure 2. Switching Time
_______________________________________________________________________________________
7
MAX4541–MAX4544
Power-Supply Sequencing
and Overvoltage Protection
MAX4541–MAX4544
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
_________________________________Test Circuits/Timing Diagrams (continued)
V+
MAX4543
V+
NO1
+3V
VOUT1
COM1
RL2
300Ω
IN1
IN2
LOGIC
INPUT
+3V
50%
0
VOUT2
COM2
NC2
LOGIC
INPUT
RL1
300Ω
CL1
35pF
SWITCH
OUTPUT 1
(VOUT1)
CL2
35pF
0.9 · V0UT1
0
SWITCH
OUTPUT 2
(VOUT2)
GND
0.9 · VOUT2
tD
0
tD
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
Figure 3a. Break-Before-Make Interval (MAX4543 only)
V+
MAX4544
LOGIC
INPUT
V+
NC
+3V
50%
0
VOUT
COM
+3V
NO
RL
300Ω
IN
LOGIC
INPUT
CL
35pF
SWITCH
OUTPUT
(VOUT)
GND
0.9 · VOUT
tD
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
Figure 3b. Break-Before-Make Interval (MAX4544 only)
V+
MAX4541
MAX4542
MAX4543
MAX4544
∆VOUT
V+
RGEN
V GEN
NC
OR NO
VOUT
COM
VOUT
IN
OFF
CL
GND
ON
OFF
IN_
VIN = +3V
IN
OFF
ON
OFF
Q = (∆V OUT )(C L )
IN DEPENDS ON SWITCH CONFIGURATION;
INPUT POLARITY DETERMINED BY SENSE OF SWITCH.
Figure 4. Charge Injection
8
_______________________________________________________________________________________
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
SIGNAL
GENERATOR 0dBm
MAX4541
MAX4542
MAX4543
MAX4544
V+
10nF
COM
V+
IN
0V OR
2.4V
NC
OR NO
ANALYZER
10nF
SIGNAL
GENERATOR 0dBm
0 OR 2.4V
V+
COM1
NO1
IN1
IN2
COM2
NO2
ANALYZER
GND
MAX4541
MAX4542
MAX4543
V+
50Ω
0 OR
2.4V
NC
GND
RL
RL
Figure 6. Crosstalk
Figure 5. Off-Isolation
Chip Information
TRANSISTOR COUNT: 76
V+
10nF
MAX4541
MAX4542
MAX4543
MAX4544
V+
COM
CAPACITANCE
METER
f = 1MHz
IN
0 OR
2.4V
NC OR
NO
GND
Figure 7. Channel Off/On-Capacitance
_______________________________________________________________________________________
9
MAX4541–MAX4544
_________________________________Test Circuits/Timing Diagrams (continued)
MAX4541–MAX4544
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
___Ordering Information (continued)
PART
MAX4541EPA
TEMP RANGE
PINPACKAGE
-40°C to +85°C
8 Plastic DIP
TOP
MARK
—
MAX4542CUA
0°C to +70°C
8 µMAX
—
MAX4542CSA
0°C to +70°C
8 SO
—
MAX4542CPA
0°C to +70°C
8 Plastic DIP
—
MAX4542C/D
0°C to +70°C
Dice*
8 SOT23-8
—
MAX4542EKA-T
-40°C to +85°C
AAAF
MAX4542EGA
-40°C to +85°C
8 QFN
—
MAX4542EUA
-40°C to +85°C
8 µMAX
—
MAX4542ESA
-40°C to +85°C
8 SO
—
MAX4542EPA
-40°C to +85°C
8 Plastic DIP
—
MAX4543CUA
0°C to +70°C
8 µMAX
—
MAX4543CSA
0°C to +70°C
8 SO
—
MAX4543CPA
0°C to +70°C
8 Plastic DIP
—
MAX4543C/D
0°C to +70°C
Dice*
—
MAX4543EKA-T
-40°C to +85°C
8 SOT23-8
AAAG
MAX4543EGA
-40°C to +85°C
8 QFN
—
MAX4543EUA
-40°C to +85°C
8 µMAX
—
MAX4543ESA
-40°C to +85°C
8 SO
—
MAX4543EPA
-40°C to +85°C
8 Plastic DIP
—
MAX4544CUA
0°C to +70°C
8 µMAX
—
MAX4544CSA
0°C to +70°C
8 SO
—
MAX4544CPA
0°C to +70°C
8 Plastic DIP
—
MAX4544C/D
0°C to +70°C
Dice*
6 SOT23-6
—
MAX4544EUT-T
-40°C to +85°C
AAAM
MAX4544EGA
-40°C to +85°C
8 QFN
—
MAX4544EUA
-40°C to +85°C
8 µMAX
—
MAX4544ESA
-40°C to +85°C
8 SO
—
MAX4544EPA
-40°C to +85°C
8 Plastic DIP
—
*Dice are specified at TA = +25°C.
10
______________________________________________________________________________________
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
TOP VIEW
MAX4541
MAX4542
8
V+
NC1
1
2
7
IN1
COM1
3
6
COM2
IN2
4
5
NO2
GND
NO1
1
COM1
IN2
GND
µMAX/SO/DIP/QFN
MAX4543
8
V+
NO1
1
2
7
IN1
COM1
3
6
COM2
IN2
4
5
NC2
GND
µMAX/SO/DIP/QFN
MAX4541
V+
2
7
IN1
3
6
COM2
4
5
NC2
µMAX/SO/DIP/QFN
MAX4542
NO1
1
8
COM1
V+
2
7
IN2
COM2
MAX4543
NC1
1
8
COM1
IN1
V+
2
7
3
6
GND
IN2
4
5
NO2
COM2
SOT23-8
8
NO1
1
8
COM1
IN1
V+
2
7
IN1
3
6
GND
IN2
3
6
GND
4
5
NC2
COM2
4
5
NC2
SOT23-8
SOT23-8
SWITCHES SHOWN FOR LOGIC "0" INPUT
______________________________________________________________________________________
11
MAX4541–MAX4544
_________Pin Configurations/Functional Diagrams/Truth Tables (continued)
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
6L, 8L QFN(DUAL).EPS
MAX4541–MAX4544
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
µ
12
______________________________________________________________________________________
Low-Voltage, Single-Supply
Dual SPST/SPDT Analog Switches
6LSOT.EPS
SOT23, 8L.EPS
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 13
© 2002 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
MAX4541–MAX4544
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
Similar pages