Maxim MAX4591CUE High-speed, single-supply, quad, spst analog switch Datasheet

19-1539; Rev 0; 2/00
High-Speed, Single-Supply,
Quad, SPST Analog Switches
Features
Applications
Test Equipment
Sample-and-Hold Circuits
Disk Drives
Guidance and Control Systems
Tape Drives
Military Radios
Audio and Video
Communications Systems
Switching
PBX, PABX
♦ Low 16Ω On-Resistance
♦ Fast Switching Times: tON = 50ns, tOFF = 30ns
♦ Guaranteed 1Ω max On-Resistance Match
Between Channels
♦ Guaranteed 1.75Ω max On-Resistance Flatness
over Signal Range
♦ Guaranteed 5pC max Charge Injection
♦ Improved Leakage over Temperature: 5nA max at
+85°C
♦ ESD >2000V per Method 3015.7
♦ +12V or +15V Single-Supply Operation
♦ Pin Compatible with DG611/DG612/DG613,
DG211/DG212/DG213
Ordering Information
PART
TEMP. RANGE
MAX4591CUE
0°C to +70°C
MAX4591CSE
MAX4591CPE
MAX4591EUE
MAX4591ESE
MAX4591EPE
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
16 TSSOP
16 Narrow SO
16 Plastic DIP
16 TSSOP
16 Narrow SO
16 Plastic DIP
Ordering Information continued at end of data sheet.
Heads-Up Displays
_____________________Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
IN1
1
16
IN2
COM1
2
15
COM2
NC1
3
14
NC2
V-
4
13
V+
GND
5
12
N.C.
MAX4591
NC4
6
11
NC3
COM4
7
10
COM3
IN4
8
9
TSSOP/SO/DIP
MAX4591
LOGIC
SWITCH
0
1
N.C. = NO CONNECTION
ON
OFF
IN3
IN1
1
16 IN2
COM1
2
15
NO1
3
14 NO2
V-
4
13 V+
GND
5
MAX4592
COM2
12 N.C.
NO4
6
11 NO3
COM4
7
10 COM3
IN4
8
9
IN3
IN1
1
16 IN2
COM1
2
15
NO1
3
14 NC2
V-
4
GND
5
0
1
OFF
ON
13 V+
MAX4593
12 N.C.
NO4
6
11 NC3
COM4
7
10 COM3
IN4
8
TSSOP/SO/DIP
MAX4592
LOGIC
SWITCH
COM2
9
IN3
TSSOP/SO/DIP
LOGIC
0
1
MAX4593
SWITCHES
1, 4
SWITCHES
2, 3
OFF
ON
ON
OFF
SWITCHES SHOWN FOR LOGIC "0" INPUT
________________________________________________________________ Maxim Integrated Products
1
For free samples and the latest literature, visit www.maxim-ic.com or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
MAX4591/MAX4592/MAX4593
General Description
The MAX4591/MAX4592/MAX4593 are high-speed,
precision, quad, single-pole/single-throw (SPST) analog
switches designed to operate at +12V or +15V. The
MAX4591 has four normally closed (NC) switches, and
the MAX4592 has four normally open (NO) switches.
The MAX4593 has two NO and two NC switches. All
three devices offer low leakage (100pA max) and fast
switching speeds (tON ≤ 80ns, tOFF ≤ 45ns).
With a +12V supply, the MAX4591/MAX4592/MAX4593
offer guaranteed 1Ω max channel-to-channel matching,
20Ω max on-resistance (RON), and 1.75Ω max RON flatness over the specified range.
These switches are also fully specified for single +15V
operation, with 16Ω max RON, 1.5Ω max RON match,
and 1.5Ω max flatness. For low-voltage or dual-supply
operation, refer to the MAX391 data sheet.
These low-voltage switches also offer 5pC max charge
injection, and electrostatic discharge (ESD) protection
is greater than 2000V, per Method 3015.7.
MAX4591/MAX4592/MAX4593
High-Speed, Single-Supply,
Quad, SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
V+ to GND ..............................................................-0.3V to +17V
VIN_, VCOM_, VNC_, VNO_ (Note 1) ..................................V- to V+
Current (any terminal) .........................................................30mA
Peak Current, COM_, NO_, NC_
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
ESD per Method 3015.7 ..................................................>2000V
Continuous Power Dissipation (TA = +70°C)
16-Pin TSSOP (derate 5.70mW/°C above +70°C) .......457mW
16-Pin Narrow SO (derate 8.70mW/°C above +70°C)....696mW
16-Pin Plastic DIP (derate 10.53mW/°C above+70°C) ...842mW
Operating Temperature Ranges
MAX459_C_ E .....................................................0°C to +70°C
MAX459_E_ E ..................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on NC_, NO_, COM_, or IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to
maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +12V Supply
(V+ = +12V, V- = GND = 0, VINH = 5V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
(Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
V+
V
ANALOG SWITCH
Analog Signal Range
On-Resistance
On-Resistance Match Between
Channels (Note 4)
VCOM_,
VNO_,
VNC_
(Note 3)
C, E
RON
ICOM_ = -10mA,
VNO_ or VNC_ = 10V
TA = +25°C
∆RON
ICOM_ = -10mA,
VNO_ or VNC_ = 10V
TA = +25°C
NO or NC Off-Leakage Current
(Note 6)
INO_(OFF)
or
INC_(OFF)
V+ = 15.5V;
VCOM_ = 14V, 1V;
VNO_ or VNC_ = 1V,
14V
TA = +25°C
V+ = 15.5V;
VCOM_ = 14V, 1V;
VNO_ or VNC_ = 1V,
14V
TA = +25°C
ICOM_(OFF)
2
V+ = 15.5V;
VCOM_ = 14V, 1V;
ICOM_(ON)
VNO_ or VNC_ = 14V,
1V, or floating
20
24
0.5
C, E
ICOM_ = -10mA;
RFLAT(ON) VNO_ or VNC_ = 3V, 6V,
9V
COM On-Leakage Current
(Note 6)
16
C, E
On-Resistance Flatness
(Note 5)
COM Off-Leakage Current
(Note 6)
V-
1
1.5
TA = +25°C
1
Ω
Ω
1.75
Ω
C, E
2
-0.1
0.01
0.1
nA
C, E
-5
-0.1
5
0.01
0.1
nA
C, E
-5
TA = +25°C
-0.2
C, E
-10
5
0.01
0.2
nA
_______________________________________________________________________________________
10
High-Speed, Single-Supply,
Quad, SPST Analog Switches
(V+ = +12V, V- = GND = 0, VINH = 5V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
(Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
LOGIC INPUT
Input Current with Input
Voltage High
IINH
IN_ = V+, all others = 0.8V
-0.5
0.005
0.5
µA
Input Current with Input
Voltage Low
IINL
IN_ = 0.8V, all others = V+
-0.5
0.005
0.5
µA
Turn-On Time
tON
VCOM_ = 10V, Figure 2
50
80
Turn-Off Time
tOFF
VCOM_ = 10V, Figure 2
DYNAMIC
TA = +25°C
C, E
90
TA = +25°C
30
C, E
45
50
ns
ns
Break-Before-Make
Time Delay (Note 3)
tD
MAX4593 only, RL = 300Ω, CL = 35pF, Figure 3
Charge Injection
(Note 3)
Q
CL = 1nF, VGEN = 0,
RGEN = 0Ω, Figure 4
TA = +25°C
2
OIRR
RL = 50Ω, CL = 5pF,
f = 10MHz, Figure 5
TA = +25°C
72
dB
RL = 50Ω, CL = 5pF,
f = 10MHz, Figure 6
TA = +25°C
85
dB
Off-Isolation (Note 7)
Crosstalk (Note 8)
NC_ or NO_ Capacitance
C(OFF)
5
20
ns
5
pC
f = 1MHz, Figure 7
TA = +25°C
9
pF
COM_ Off-Capacitance CCOM_(OFF) f = 1MHz, Figure 7
TA = +25°C
9
pF
COM_ On-Capacitance
TA = +25°C
22
pF
CCOM_(ON) f = 1MHz, Figure 8
SUPPLY
Power-Supply Range
Positive Supply Current
3
I+
V+ = 15V,
VIN_ = 0 or V+,
all channels on or off
C, E
-1
0.001
16
V
1
µA
_______________________________________________________________________________________
3
MAX4591/MAX4592/MAX4593
ELECTRICAL CHARACTERISTICS—Single +12V Supply (continued)
MAX4591/MAX4592/MAX4593
High-Speed, Single-Supply,
Quad, SPST Analog Switches
ELECTRICAL CHARACTERISTICS—Single +15V Supply
(V+ = +15V, V- = GND = 0, VINH = 5V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
(Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
V+
V
ANALOG SWITCH
Analog Signal Range
On-Resistance
On-Resistance Match
Between Channels (Notes 3, 4)
VCOM_,
VNO_,
VNC_
(Note 3)
0
RON
ICOM_ = -10mA,
VNO_ or VNC_ = 10V
TA = +25°C
∆RON
ICOM_ = -10mA,
VNO_ or VNC_ = 10V
TA = +25°C
12
C, E
2.0
0.5
C, E
On-Resistance Flatness
(Notes 3, 5)
RFLAT(ON)
TA = +25°C
ICOM_ = -10mA;
VNO_ or VNC_ = 3V, 6V, 9V C, E
NO_ or NC_ Off-Leakage
Current (Note 6)
INO_(OFF)
or
INC_(OFF)
V+ = 15.5V;
VCOM_ = 14V, 1V;
VNO_ or VNC_ 1V, 14V
COM_ Off-Leakage Current
(Note 6)
V+ = 15.5V;
TA = +25°C
ICOM_(OFF) VCOM_ = 14V, 1V;
VNO_ or VNC_ = 1V, 14V C, E
COM_ On-Leakage Current
(Note 6)
V+ = 15.5V;
TA = +25°C
VCOM_ =14V, 1V;
ICOM_(ON)
VNO_ or VNC_ = 14V, 1V,
C, E
or floating
TA = +25°C
16
1.5
2.0
0.7
1.5
2.0
-0.1
0.01
Ω
Ω
Ω
0.1
nA
C, E
-5
-0.1
5
0.01
0.1
nA
-5
-0.2
5
0.02
0.2
nA
-10
10
DYNAMIC
Turn-On Time
tON
VNO_ or VNC_ = 10V,
Figure 2
TA = +25°C
Turn-Off Time
tOFF
VNO_ or VNC_ = 10V,
Figure 2
TA = +25°C
60
C, E
30
C, E
Break-Before-Make Time
Delay (Note 3)
tD
MAX4593 only, RL = 300Ω, CL = 35pF
Charge Injection
(Note 3)
Q
CL = 1nF, VGEN = 0,
RGEN = 0Ω, Figure 4
Positive Supply Current
I+
V+ = 15V, VIN_ = 0 or V+, all channels on or off
Negative Supply Current
I-
V+ = 15V, VIN_ = 0 or V+, all channels on or off
80
90
40
50
5
TA = +25°C
20
ns
ns
ns
2
5
pC
-1
0.001
1
µA
-1
0.001
1
µA
SUPPLY
Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 3: Guaranteed by design.
Note 4: ∆RON = ∆RON max - ∆RON min.
Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Note 6: Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25°C.
Note 7: Off-isolation = 20log10 [VCOM ⁄ (VNC or VNO)], VCOM = output, VNC or VNO = input to off switch.
Note 8: Between any two switches.
4
_______________________________________________________________________________________
High-Speed, Single-Supply,
Quad, SPST Analog Switches
RON vs. VCOM AND TEMPERATURE
(V+ = 15V)
RON vs. VCOM AND TEMPERATURE
(V+ = 12V)
40
30
10
TA = +125°C
30
RON (Ω)
V+ = 15V
RON (Ω)
RON (Ω)
TA = +125°C
TA = +85°C
TA = +25°C
20
TA = +85°C
20
5
10
10
TA = +25°C
TA = -55°C
TA = -55°C
0
2.5
5.0
7.5
10.0
12.5
15.0
0
2
4
6
8
10
0
12
2.5
5.0
7.5
10.0
12.5
VCOM (V)
VCOM (V)
VCOM (V)
ON/OFF-LEAKAGE CURRENT
vs. TEMPERATURE
CHARGE INJECTION vs. VCOM
POWER-SUPPLY CURRENT
vs. TEMPERATURE
V+ = 15V
1
25
V+ = 12V
V- = -3V
20
ON
100
MAX4591 toc05
30
MAX4591 toc04
10
V+ = 15V
10
15.0
15
OFF
10
V+ = 12V
V- = 0
5
0.01
0
0.001
-10
1
I+ (nA)
Q (pC)
0.1
V+ = 15V
V- = 0
V+ = 12V
0.1
-5
0.01
-15
0.001
-20
-75 -55 -35 -15 5
-4
25 45 65 85 105 125
-2
0
2
4
6
8
-60 -40 -20 0
10 12 14 16
TURN-ON/OFF TIME
vs. TEMPERATURE
TURN-ON/OFF TIME vs. VCOM
70
MAX4591 toc07
70
tON
V+ = 15V
60
tON
V+ = 15V
60
tON
V+ = 12V
50
tON
V+ = 12V
30
tOFF
V+ = 12V
20
tON, tOFF (ns)
50
40
40
tOFF
V+ = 12V
30
20
tOFF
V+ = 15
10
20 40 60 80 100 120 140
TEMPERATURE (°C)
VCOM (V)
TEMPERATURE (°C)
MAX4591 toc08
0.0001
tON, tOFF (ns)
ON/OFF-LEAKAGE (nA)
0
0
0
MAX4591 toc06
V+ = 12V
15
40
MAX4591 toc02
50
MAX4591 toc01
20
MAX4591 toc03
RON vs. VCOM
tOFF
V+ = 15V
10
0
0
-40
-20
0
20
40
TEMPERATURE (°C)
60
80
0
2
4
6
8
10
12
14
16
VCOM (V)
_______________________________________________________________________________________
5
MAX4591/MAX4592/MAX4593
__________________________________________Typical Operating Characteristics
(V- = GND = 0, IN_ = 0 or V+, TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
(V- = GND = 0, IN_ = 0 or V+, TA = +25°C, unless otherwise noted.)
TURN-ON/OFF TIME
vs. POWER-SUPPLY VOLTAGE
FREQUENCY RESPONSE
VCOM = 10V
100
V+ = 15V
0
MAX4591 toc10
10
MAX4591 toc09
120
ON-RESPONSE
-10
-20
80
LOSS (dB)
tON, tOFF (ns)
MAX4591/MAX4592/MAX4593
High-Speed, Single-Supply,
Quad, SPST Analog Switches
tON
60
40
-30
-40
OFF-ISOLATION
-50
-60
tOFF
-70
20
-80
-90
0
10
11
12
13
14
15
16
0.1
POWER-SUPPLY VOLTAGE (V)
1
10
100
1000
FREQUENCY (MHz)
______________________________________________________________Pin Description
PIN
NAME
FUNCTION
1, 16, 9, 8
IN1–IN4
2, 15, 10, 7
COM1–COM4
3, 14, 11, 6
NO1–NO4
or
NC1–NC4
4
V-
5
GND
Ground
12
N.C.
No Connection. Not internally connected.
13
V+
Switch Input Terminals. Drive ≤ 0.8V for logic “0”; drive ≥ 5V for logic “1”.
Analog Switch Common Terminal
Switch Inputs
Negative Supply Voltage Input. Normally connected to ground.
Positive Supply Voltage Input. Connected to substrate.
__________Applications Information
POSITIVE SUPPLY
Overvoltage Protection
Proper power-supply sequencing is recommended for
all CMOS devices. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices.
Always sequence V+ on first, followed by the logic
inputs. If power-supply sequencing is not possible, add
a small signal diode in series with V+ for overvoltage
protection (Figure 1). Adding a diode reduces the analog signal range to 1V below V+, but low switch resistance and low leakage characteristics are unaffected.
Device operation is unchanged, and the difference
between V+ and V- should not exceed 17V.
V+
NO
COM
Vg
V-
GND
Figure 1. Overvoltage Protection Using Two External Blocking
Diodes
6
_______________________________________________________________________________________
High-Speed, Single-Supply,
Quad, SPST Analog Switches
V+
MAX4591
MAX4592
MAX4593
SWITCH
INPUT
COM_
V COM
SWITCH
OUTPUT
V+
NO_
OR NC_
VOUT
RL
300Ω
IN_
GND
LOGIC
INPUT
LOGIC
INPUT
50%
0
CL
35pF
t OFF
V-
VOUT
SWITCH
OUTPUT
0
0.9 · V0UT
0.9 · VOUT
t ON
LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES
THAT HAVE THE OPPOSITE LOGIC SENSE.
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL
VOUT = VCOM
RL + RON
(
t r < 20ns
t f < 20ns
+5V
)
Figure 2. Switching Time
V+
MAX4593
V+
COM_
VCOM1 = +10V
NO_
RL2
GND
RL1
VOUT2
IN_
LOGIC
INPUT
50%
VOUT1
NC_
COM_
VCOM2 = +10V
+5V
LOGIC
INPUT
0
CL1
SWITCH
OUTPUT 1
(VOUT1)
CL2
0.9 · V0UT1
0
SWITCH
OUTPUT 2
(VOUT2)
V-
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
0.9 · VOUT2
0
RL = 300Ω
CL = 35pF
tD
tD
Figure 3. Break-Before-Make Interval (MAX4593 Only)
MAX4591
MAX4593
MAX4593
V+
∆VOUT
V+
RGEN
VOUT
NC_ OR
COM_
VOUT
NO_
IN
OFF
CL
V GEN
GND
IN_
V-
IN
VIN = 0 TO +5V
OFF
ON
ON
OFF
OFF
Q = (∆V OUT )(C L )
IN DEPENDS ON SWITCH CONFIGURATION;
INPUT POLARITY DETERMINED BY SENSE OF SWITCH.
Figure 4. Charge Injection
_______________________________________________________________________________________
7
MAX4591/MAX4592/MAX4593
Test Circuits/Timing Diagrams
MAX4591/MAX4592/MAX4593
High-Speed, Single-Supply,
Quad, SPST Analog Switches
_________________________________Test Circuits/Timing Diagrams (continued)
10nF
SIGNAL
GENERATOR 0dBm
MAX4591
MAX4592
MAX4593
V+
SIGNAL
GENERATOR 0dBm
V+
COM_
IN_
0 OR + 5V
MAX4591
MAX4592
MAX4593
V+
V+
COM_
N0_
IN_
IN_
0V or 2.4V
NC_
COM
OR NO_
ANALYZER
10nF
GND
0 OR +5V
COM_
N0_
ANALYZER
V-
GND
RL
50Ω
NC
V-
RL
Figure 5. Off-Isolation
Figure 6. Crosstalk
10nF
MAX4591
MAX4592
MAX4593
V+
10nF
MAX4591
MAX4592
MAX4593
V+
V+
COM_
V+
COM_
CAPACITANCE
METER
IN_
CAPACITANCE
METER
f = 1MHz
Figure 7. Channel Off-Capacitance
8
f = 1MHz
NC_
OR NO_
GND
IN_
0 OR +5V
V-
NC_
OR NO_
GND
V-
Figure 8. Channel On-Capacitance
_______________________________________________________________________________________
0 OR +5V
High-Speed, Single-Supply,
Quad, SPST Analog Switches
PART
TEMP. RANGE
PIN-PACKAGE
MAX4592CUE
0°C to +70°C
16 TSSOP
MAX4592CSE
0°C to +70°C
16 Narrow SO
MAX4592CPE
MAX4592EUE
MAX4592ESE
MAX4592EPE
MAX4593CUE
MAX4593CSE
MAX4593CPE
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
16 Plastic DIP
16 TSSOP
16 Narrow SO
16 Plastic DIP
16 TSSOP
16 Narrow SO
16 Plastic DIP
MAX4593EUE
MAX4593ESE
MAX4593EPE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
16 TSSOP
16 Narrow SO
16 Plastic DIP
Chip Information
TRANSISTOR COUNT: 76
Package Information
_______________________________________________________________________________________
9
MAX4591/MAX4592/MAX4593
Ordering Information (continued)
MAX4591/MAX4592/MAX4593
High-Speed, Single-Supply,
Quad, SPST Analog Switches
___________________________________________Package Information (continued)
10
______________________________________________________________________________________
High-Speed, Single-Supply,
Quad, SPST Analog Switches
PDIPN.EPS
______________________________________________________________________________________
11
MAX4591/MAX4592/MAX4593
___________________________________________Package Information (continued)
MAX4591/MAX4592/MAX4593
High-Speed, Single-Supply,
Quad, SPST Analog Switches
NOTES
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2000 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
Similar pages