Maxim MAX5413 Dual, 256-tap, low-drift, digital potentiometers in 14-pin tssop Datasheet

19-1943; Rev 0; 1/01
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
Features
♦ 14-Pin TSSOP Small-Footprint Package
♦ 256 Tap Positions
♦ Ultra-Low 0.1µA Supply Current
♦ +2.7V to +5.5V Single-Supply Operation
♦ Two Independent Potentiometers in a Package
♦ Low End-to-End Temperature Coefficient
35ppm/°C
♦ Low Ratiometric Temperature Coefficient
5ppm/°C
♦ Power-On Reset: Wiper Goes to Midscale
(Position 128)
♦ Glitchless Switching Between Resistor Taps
♦ 3-Wire SPI™-Interface Compatible
♦ 10kΩ/50kΩ/100kΩ Resistor Values
Ordering Information
Applications
Mechanical Potentiometer Replacement
PART
TEMP. RANGE
PIN-PACKAGE
R (kΩ)
Low-Drift Programmable Gain Amplifier (PGA)
MAX5413EUD
-40°C to +85°C
14 TSSOP
10
Volume Control
MAX5414EUD
-40°C to +85°C
14 TSSOP
50
LCD Screen Adjustment
MAX5415EUD
-40°C to +85°C
14 TSSOP
100
Adjustable Voltage Reference
Programmable Filters, Delays, Time Constant
Pin Configuration
Impedance Matching
TOP VIEW
GND 1
14 LA
LB
2
13 HA
HB
3
12 WA
WB 4
N.C. 5
SPI is a trademark of Motorola, Inc.
MAX5413
MAX5414
MAX5415
11 VDD
10 N.C.
N.C. 6
9
SCLK
CS 7
8
DIN
TSSOP
________________________________________________________________ Maxim Integrated Products
1
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX5413/MAX5414/MAX5415
General Description
The MAX5413/MAX5414/MAX5415 is a family of dual
linear taper digital potentiometers. Each device has two
3-terminal potentiometers. The MAX5413/MAX5414/
MAX5415 operate from +2.7V to +5.5V single-supply
voltages and use an ultra-low 0.1µA supply current.
These devices also provide glitchless switching
between resistor taps, as well as a convenient poweron reset (POR) that sets the wiper to the midscale position at power-up. Each potentiometer consists of a fixed
resistor with a wiper contact that is digitally controlled
through a 3-wire serial interface and has 256 tap points.
It performs the same function as a discrete potentiometer or variable resistor.
These parts are ideal for applications requiring digitally
controlled resistors. Three resistance values are available: 10kΩ (MAX5413), 50kΩ (MAX5414), and 100kΩ
(MAX5415). A nominal resistor temperature coefficient
of 35ppm/°C end-to-end and 5ppm/°C ratiometric make
the MAX5413/MAX5414/MAX5415 ideal for applications
requiring low temperature-coefficient variable resistors,
such as adjustable-gain circuit configurations.
The MAX5413/MAX5414/MAX5415 are available in a 14pin TSSOP package. Each device is guaranteed over the
extended industrial temperature range (-40°C to +85°C).
MAX5413/MAX5414/MAX5415
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
DIN, SCLK, CS .........................................................-0.3V to +6V
HX, LX, WX to GND ........................................-0.3V to (VDD +0.3)
Maximum Continuous Current into HX, LX, and WX............±1mA
Continuous Power Dissipation (TA = +70°C)
14-Pin TSSOP (derate 9.1mW/°C above +70°C) .........727mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V, unless otherwise noted. VH = VDD, VL = 0, TA = TMIN to TMAX. Typical values are at VDD = +5V, TA = +25°C,
unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DC PERFORMANCE (Voltage-Divider Mode)
Resolution
N
8
Bits
Integral Nonlinearity (Notes 1, 2)
INL
±1/2
Differential Nonlinearity (Notes 1, 2)
DNL
±1/2
End-to-End Resistor Tempco
TCR
Ratiometric Resistor Tempco
Full-Scale Error
Zero-Scale Error
LSB
LSB
35
ppm/°C
5
ppm/°C
MAX5413
-8
MAX5414
-1.6
MAX5415
0.8
MAX5413
+8
MAX5414
+1.6
MAX5415
+0.8
LSB
LSB
DC PERFORMANCE (Variable-Resistor Mode)
Resolution
N
8
Bits
±1
VDD = +5V
Integral Nonlinearity (Notes 1, 3)
Differential Nonlinearity
(Notes 1, 3)
INL
VDD = +3V
DNL
MAX5413
±3
MAX5414
±1.5
MAX5415
±1.5
VDD = +5V
±1/2
VDD = +3V
LSB
LSB
LSB
DC PERFORMANCE (Resistor Characteristics)
Wiper Resistance (Note 4)
RW
Wiper Capacitance
CW
End-to-End Resistance
RHL
2
VDD = +5V
275
VDD = +3V
550
MAX5413
50
MAX5414/MAX5415
30
pF
MAX5413
7.5
10
12.5
MAX5414
37.5
50
62.5
MAX5415
75
100
125
_______________________________________________________________________________________
Ω
kΩ
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
(VDD = +5V, unless otherwise noted. VH = VDD, VL = 0, TA = TMIN to TMAX. Typical values are at VDD = +5V, TA = +25°C,
unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DIGITAL INPUTS
Input High Voltage
VIH
Input Low Voltage
VIL
0.7 x VDD
V
Input Leakage Current
Input Capacitance
0.3 x VDD
V
±1.0
µA
5
pF
TIMING CHARACTERISTICS (ANALOG)
Wiper-Settling Time
tS
MAX5413
100
MAX5414
325
MAX5415
650
ns
TIMING CHARACTERISTICS (DIGITAL) (Note 5)
Maximum SCLK Frequency
10
MHz
SCLK Clock Period
tCP
100
ns
SCLK Pulse Width High
tCH
40
ns
SCLK Pulse Width Low
tCL
40
ns
CS Fall to SCLK Rise Setup Time
tCSS
40
ns
SCLK Rise to CS Rise Hold Time
tCSH
0
ns
DIN Setup Time
tDS
40
ns
DIN Hold Time
tDH
0
ns
SCLK Rise to CS Fall Delay
tCS0
10
ns
CS Rise to SCLK Rise Hold
tCS1
40
ns
CS Pulse Width High
tCSW
100
ns
POWER SUPPLIES
Supply Voltage
Supply Current
VDD
IDD
2.7
CS = SCLK = DIN = VDD
VDD = +5V
0.8
VDD = +2.7V
0.1
5.5
V
5
µA
µA
Note 1: Linearity is defined in terms of the HX to LX code-dependent resistance.
Note 2: The DNL and INL are measured with the potentiometer configured as a voltage-divider with HX = VDD and LX = 0. The wiper
terminal is unloaded and measured with an ideal voltmeter.
Note 3: The DNL and INL are measured with the potentiometer configured as a variable resistor. HX is unconnected and LX = 0. At
VDD = +5V, the wiper terminal is driven with a source current of 400µA for the 10kΩ configuration, 80µA for the 50kΩ configuration, and 40µA for the 100kΩ configuration. At VDD = +3V, 200µA/40µA/20µA for 10kΩ/50kΩ/100kΩ configurations,
respectively.
Note 4: The wiper resistance is the worst value measured by injecting into WX, a current IW = VDD / RHL.
Note 5: Digital timing is guaranteed by design.
_______________________________________________________________________________________
3
MAX5413/MAX5414/MAX5415
ELECTRICAL CHARACTERISTICS (continued)
Typical Operating Characteristics
(VDD = +5.0V, TA = +25°C, unless otherwise noted.)
240
220
VDD = +5V
200
VDD = +3V
320
300
280
VDD = +5V
260
240
220
180
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
320
300
280
260
240
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0
WIPER VOLTAGE (V)
WIPER RESISTANCE
vs. INPUT CODE (10kΩ)
WIPER RESISTANCE
vs. INPUT CODE (50kΩ)
WIPER RESISTANCE
vs. INPUT CODE (100kΩ)
6
5
4
3
90
W-TO-L RESISTANCE (kΩ)
40
35
30
25
20
15
80
70
60
50
40
30
2
10
20
1
5
10
0
0
64
96
128 160 192 224 256
0
0
32
64
96
128 160 192 224 256
0
32
64
96
128 160 192 224 256
INPUT CODE (DECIMAL)
INPUT CODE (DECIMAL)
INPUT CODE (DECIMAL)
VARIABLE RESISTOR DNL
vs. INPUT CODE (10kΩ)
VARIABLE RESISTOR INL
vs. INPUT CODE (10kΩ)
VARIABLE RESISTOR DNL
vs. INPUT CODE (50kΩ)
0.40
0.05
0.04
0.05
0.20
DNL (LSB)
INL (LSB)
0.30
0.10
0.10
0.00
-0.20
128 160 192 224 256
INPUT CODE (DECIMAL)
0.01
VDD = +5V
-0.02
-0.03
-0.30
96
0.02
-0.01
0.00
64
0.03
0.00
-0.10
-0.05
MAX5413 toc09
0.15
0.06
MAX5413 toc08
0.50
MAX5413 toc07
0.20
32
MAX5413 toc06
45
W-TO-L RESISTANCE (kΩ)
7
100
MAX5413 toc05
50
MAX5413 toc04
8
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
WIPER VOLTAGE (V)
9
32
VDD = +5V
WIPER VOLTAGE (V)
10
0
VDD = +3V
180
160
160
0
360
340
220
200
200
160
4
400
380
MAX5413 toc02
340
180
W-TO-L RESISTANCE (kΩ)
WIPER RESISTANCE
vs. WIPER VOLTAGE (100kΩ)
WIPER RESISTANCE (Ω)
VDD = +3V
260
360
WIPER RESISTANCE (Ω)
280
WIPER RESISTANCE (Ω)
380
MAX5413 toc01
300
WIPER RESISTANCE
vs. WIPER VOLTAGE (50kΩ)
MAX5413 toc03
WIPER RESISTANCE
vs. WIPER VOLTAGE (10kΩ)
DNL (LSB)
MAX5413/MAX5414/MAX5415
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
0
32
64
96
128 160 192 224 256
INPUT CODE (DECIMAL)
0
32
64
96
128 160 192 224 256
INPUT CODE (DECIMAL)
_______________________________________________________________________________________
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
VARIABLE RESISTOR INL
vs. INPUT CODE (50kΩ)
DNL (LSB)
-0.04
-0.06
-0.08
-0.10
-0.12
-0.14
-0.16
0
32
64
96
-0.20
0
32
96
128
160 192 224
256
0
0.10
0.02
160 192 224
0.07
0.06
256
0.05
0.00
-0.05
0.04
0.03
0.02
0.01
-0.10
0.00
128
0.08
DNL (LSB)
INL (LSB)
0.03
96
VOLTAGE-DIVIDER DNL
vs. INPUT CODE (50kΩ)
0.05
0.04
64
INPUT CODE (DECIMAL)
MAX5413 toc14
0.15
0.01
0.00
-0.15
-0.01
-0.01
-0.20
-0.02
0
32
64
96
128
160 192 224
256
-0.02
0
32
INPUT CODE (DECIMAL)
128
160 192 224
256
0
32
0.08
0.07
0.06
0.05
0.03
0.02
256
0.10
0.00
-0.05
-0.10
0.00
-0.15
160 192 224
0.05
0.04
0.01
-0.10
128
0.15
INL (LSB)
DNL (LSB)
-0.05
96
VOLTAGE-DIVIDER INL
vs. INPUT CODE (100kΩ)
0.05
0.00
64
INPUT CODE (DECIMAL)
MAX5413 toc17
0.10
96
VOLTAGE-DIVIDER DNL
vs. INPUT CODE (100kΩ)
MAX5413 toc16
0.15
64
INPUT CODE (DECIMAL)
VOLTAGE-DIVIDER INL
vs. INPUT CODE (50kΩ)
INL (LSB)
32
VOLTAGE-DIVIDER INL
vs. INPUT CODE (10kΩ)
0.05
DNL (LSB)
64
INPUT CODE (DECIMAL)
MAX5413 toc13
0.06
-0.05
-0.15
VOLTAGE-DIVIDER DNL
vs. INPUT CODE (10kΩ)
0.07
0.00
-0.10
INPUT CODE (DECIMAL)
0.08
MAX5413 toc12
0.05
0.05
0.04
0.03
0.02
0.01
0.00
-0.01
-0.02
128 160 192 224 256
0.10
MAX5413 toc18
INL (LSB)
-0.02
0.15
MAX5413 toc15
0.00
0.11
0.10
0.09
0.08
0.07
0.06
INL (LSB)
0.02
VARIABLE RESISTOR INL
vs. INPUT CODE (100kΩ)
MAX5413 toc11
0.12
MAX5413 toc10
0.04
VARIABLE RESISTOR DNL
vs. INPUT CODE (100kΩ)
-0.15
-0.01
-0.20
-0.20
-0.02
0
32
64
96
128
160 192 224
INPUT CODE (DECIMAL)
256
0
32
64
96
128
160 192 224
INPUT CODE (DECIMAL)
256
0
32
64
96
128
160 192 224
256
INPUT CODE (DECIMAL)
_______________________________________________________________________________________
5
MAX5413/MAX5414/MAX5415
Typical Operating Characteristics (continued)
(VDD = +5.0V, TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
(VDD = +5.0V, TA = +25°C, unless otherwise noted.)
SUPPLY CURRENT
vs. LOGIC INPUT VOLTAGE
MAX5413 toc19
VDD = +5V
0.1
0.01
VDD = +3V
VDD = +5V
0.8
SUPPLY CURRENT (µA)
1
SUPPLY CURRENT (mA)
1.0
MAX5413 toc20
SUPPLY CURRENT vs. TEMPERATURE
10
0.6
0.4
VDD = +3V
0.2
0.001
0.0001
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.0
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80
INPUT LOGIC VOLTAGE (V)
TEMPERATURE (°C)
TAP-TO-TAP SWITCHING TRANSIENT
(CODE 127 TO 128)
END-TO-END RESISTANCE % CHANGE
vs. TEMPERATURE
10kΩ
0.15
50kΩ
0.10
0.05
100kΩ
0
50kΩ
-0.05
VW-L
10mV/div
100kΩ
-0.10
-0.15
-0.20
10kΩ
CS
5V/div
-0.25
-40
-20
0
20
40
TEMPERATURE (°C)
6
MAX5413 toc22
MAX5413 toc21
0.20
END-TO-END RESISTANCE % CHANGE
MAX5413/MAX5414/MAX5415
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
60
80
200ns/div
_______________________________________________________________________________________
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
PIN
NAME
FUNCTION
1
GND
2
LB
Low Terminal of Resistor B
3
HB
High Terminal of Resistor B
Wiper Terminal of Resistor B
Ground
4
WB
5, 6, 10
N.C.
7
CS
SPI Chip Select
8
DIN
SPI Serial Data Input
9
SCLK
11
VDD
Power Supply, +2.7V to +5.5V. Connect a 0.1µF capacitor to GND.
12
WA
Wiper Terminal of Resistor A
13
HA
High Terminal of Resistor A
14
LA
Low Terminal of Resistor A
No Connection to this Terminal
SPI Clock Input
POR
MAX5413
MAX5414
MAX5415
VDD
GND
HA
R
DIN
9-BIT
SHIFT
REGISTER
8
R
8-BIT
LATCH
8
256
DECODE
WA
LA
HB
R
8-BIT
LATCH
SCLK
CS
8
256
DECODE
WB
LB
SR
DECODE
Figure 1. MAX5413/MAX5414/MAX5415 Functional Diagram: Dual 3-Terminal Potentiometers in 14-Pin TSSOP Configuration
Detailed Description
Each potentiometer consists of 255 fixed resistors in
series between pins HX and LX (Figure 1). The potentiometer wiper (pin WX) can be programmed to access
any one of the 256 different tap points on the resistor
string. The MAX5413/MAX5414/MAX5415 require nine
bits to program the wiper position. The first bit is an
address code, allowing one or the other potentiometer
to be selected for programming. The potentiometers
are programmed independently of each other.
The MAX5413/MAX5414/MAX5415 use a 3-wire serial
data interface to control the wiper tap position. This
write-only interface contains three inputs: Chip Select
(CS), Data In (DIN), and Data Clock (SCLK). When CS
is taken low, data from the DIN pin is synchronously
loaded into the serial shift register on each rising edge
of each SCLK pulse (Figure 2). After all the data bits
_______________________________________________________________________________________
7
MAX5413/MAX5414/MAX5415
Pin Description
MAX5413/MAX5414/MAX5415
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
POT REGISTER LOADED
CS
SCLK
1ST CLOCK PULSE
DIN
A0
D7
9TH CLOCK PULSE
D6
D5
D4
D3
D2
D1
MSB
D0
LSB
TIME
Figure 2. Potentiometer Serial Data Timing Circuit
CS
•••
tCSO
tCSS
tCL
SCLK
tCSW
tCS1
tCH
tCP
tCSH
•••
tDS
tDH
•••
DIN
Figure 3. Detailed Serial Interface Timing Diagram
have been shifted in, they are latched into the appropriate potentiometer control register when CS transitions
from low to high. Note that if CS is not kept low during
the entire data stream, the data will be corrupted and
the device will need to be reloaded.
The first bit A0 (address bit) is used to address one or
the other of the potentiometers for programming.
Potentiometer control register A is selected for writing
when A0 is ‘zero,’ and potentiometer control register B
is selected when A0 is ‘one.’
The MAX5413/MAX5414/MAX5415 feature POR circuitry that sets the wiper to the midscale position at powerup.
Applications Information
The MAX5413/MAX5414/MAX5415 are intended for a
variety of circuits where accurate, fine-tuning adjustable
resistance is required, such as in adjustable voltage or
adjustable gain circuit configurations. It is primarily used
in either a potentiometer divider or a variable-resistor
configuration.
8
Adjustable Current-to-Voltage Converter
Figure 5 shows the MAX5413/MAX5414/MAX5415 being
used with a MAX4250 low-noise op amp to fine tune a
current-to-voltage converter. Pins HX and WX of the
MAX5413/MAX5414/MAX5415 are connected to the
node between R3 and R2, and pin LX is connected to
ground. Circuit space is minimized due to both devices’
packaging.
Adjustable Gain Amplifier
Figure 6 shows how to use the MAX5413/MAX5414/
MAX5415 to digitally adjust the gain of a noninverting op
amp configuration. In Figure 6a, connect the MAX5413/
MAX5414/MAX5415 as a variable resistor in series with a
resistor to ground to form the adjustable gain control of a
noninverting amplifier.
Similarly, Figure 6b shows how to use the MAX5413/
MAX5414/MAX5415 as a 3-terminal potentiometer. In
this application, the MAX5413/MAX5414/MAX5415 low
5ppm/°C ratiometric tempco allows for a very stable
adjustable gain configuration over temperature.
_______________________________________________________________________________________
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
B0 (A0)
DATA WORD
B1 (D7)
B2 (D6)
B3 (D5)
B4 (D4)
B5 (D3)
B6 (D2)
B7 (D1)
B8 (D0)
(MSB)
(LSB)
First Bit In
Last Bit In
Figure 4. Serial Data Format
VCC
R3
VIN
HX
VOUT
WX
+5V
LX
MAX5413
MAX5414
MAX5415
R2
HX
V0
MAX4250
WX
MAX5413
MAX5414
MAX5415
V0 / IS = R3 (1 + R2/R1) + R2
LX
Figure 5. I to V Converter
Adjustable Voltage Reference
In Figure 7, the MAX5413/MAX5414/MAX5415
are shown with the MAX6160 to make an adjustable
voltage reference. In this circuit, the H X pin of the
MAX5413/MAX5414/MAX5415 is connected to the
OUT pin of the MAX6160, the LX pin of the MAX5413/
MAX5414/MAX5415 is connected to GND, and the WX
pin of the MAX5413/MAX5414/MAX5415 is connected
to the ADJ pin of the MAX6160. The MAX5413/
MAX5414/MAX5415 allow precise setting of the voltage
reference output. A low 5ppm/°C ratiometric tempco
allows a very stable adjustable voltage overtemperature.
Figure 6a. Adjustable Gain Circuit
VCC
VIN
VOUT
WX
LX
HX
MAX5413
MAX5414
MAX5415
Figure 6b. Adjustable Gain Circuit Using 3-Terminal
Potentiometer
_______________________________________________________________________________________
9
MAX5413/MAX5414/MAX5415
ADDRESS
MAX5413/MAX5414/MAX5415
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
Chip Information
+5V
VIN
OUT
VOREF
TRANSISTOR COUNT: 8689
PROCESS: BiCMOS
HX
ADJ
MAX5413
MAX5414
MAX5415
WX
GND
LX
VOREF = 12.3kV ✕ Ω / (100kΩ ✕ C / 255) FOR MAX5413
VOREF = 61.5kV ✕ Ω / (50kΩ ✕ C / 255) FOR MAX5414
VOREF = 123kV ✕ Ω / (100kΩ ✕ C / 255) FOR MAX5415
WHERE C IS ANY CODE BEING WRITTEN TO A DEVICE.
Figure 7. Adjustable Voltage Reference
10
______________________________________________________________________________________
Dual, 256-Tap, Low-Drift, Digital Potentiometers
in 14-Pin TSSOP
TSSOP,NO PADS.EPS
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11
© 2001 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
MAX5413–MAX5415
Package Information
Similar pages