Maxim MAX6064 Precision, micropower, low-dropout, high-output-current, sot23 voltage reference Datasheet

19-1659; Rev 1; 4/01
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
Applications
Analog-to-Digital Converters (ADCs)
Portable Battery-Powered Systems
Notebook Computers
PDAs, GPSs, DMMs
Cellular Phones
Precision 3V/5V Systems
Typical Operating Circuit appears at end of data sheet.
Selector Guide
Features
♦ Ultra-Small 3-Pin SOT23 Package
♦ ±0.2% (max) Initial Accuracy
♦ 20ppm/°C (max) Temperature Coefficient
♦ 5mA Source Current
♦ 2mA Sink Current
♦ No Output Capacitor Required
♦ Stable with Capacitive Loads
♦ 90µA (typ) Quiescent Supply Current
♦ 200mV (max) Dropout at 1mA Load Current
♦ Output Voltage Options: 1.25V, 1.8V, 2.048V, 2.5V,
3V, 4.096V, 4.5V, 5V
♦ 13µVp-p Noise 0.1Hz to 10Hz (MAX6061)
Ordering Information
TEMP. RANGE
PINPACKAGE
TOP
MARK
MAX6061AEUR-T -40°C to +85°C
3 SOT23-3
FZFP
MAX6061BEUR-T -40°C to +85°C
MAX6062AEUR-T -40°C to +85°C
MAX6062BEUR-T -40°C to +85°C
3 SOT23-3
3 SOT23-3
3 SOT23-3
FZFQ
FZFY
FZFZ
MAX6063AEUR-T -40°C to +85°C
MAX6063BEUR-T -40°C to +85°C
MAX6064AEUR-T -40°C to +85°C
MAX6064BEUR-T -40°C to +85°C
MAX6065AEUR-T -40°C to +85°C
MAX6065BEUR-T -40°C to +85°C
MAX6066AEUR-T -40°C to +85°C
MAX6066BEUR-T -40°C to +85°C
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
FZFV
FZFW
FZGB
FZGC
FZGE
FZGF
FZFM
FZFN
PART
Note: There is a minimum order increment of 2500 pieces for
SOT23 packages.
Ordering Information continued at end of data sheet.
Pin Configuration
PART
OUTPUT
VOLTAGE (V)
INPUT VOLTAGE (V)
MAX6061
1.248
2.5 to 12.6
MAX6068
1.800
2.5 to 12.6
MAX6062
2.048
2.5 to 12.6
MAX6066
2.500
(VOUT + 200mV) to 12.6
MAX6063
3.000
(VOUT + 200mV) to 12.6
MAX6064
4.096
(VOUT + 200mV) to 12.6
MAX6067
4.500
(VOUT + 200mV) to 12.6
MAX6065
5.000
(VOUT + 200mV) to 12.6
TOP VIEW
IN 1
MAX6061–
MAX6068
3
GND
OUT 2
SOT23-3
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX6061–MAX6068
General Description
The MAX6061–MAX6068 are precision, low-dropout,
micropower voltage references. These three-terminal
devices are available with output voltage options of
1.25V, 1.8V, 2.048V, 2.5V, 3V, 4.096V, 4.5V, and 5V.
They feature a proprietary curvature-correction circuit
and laser-trimmed thin-film resistors that result in a very
low temperature coefficient of 20ppm/°C (max) and an
initial accuracy of ±0.2% (max). Specifications apply to
the extended temperature range (-40°C to +85°C).
The MAX6061–MAX6068 typically draw only 90µA of
supply current and can source 5mA or sink 2mA of load
current. Unlike conventional shunt-mode (two-terminal)
references that waste supply current and require an
external resistor, these devices offer a supply current
that is virtually independent of the supply voltage
(8µA/V variation) and do not require an external resistor. Additionally, the internally compensated devices do
not require an external compensation capacitor.
Eliminating the external compensation capacitor saves
valuable board area in space-critical applications. Low
dropout voltage and supply independent, ultra-low supply current make these devices ideal for battery-operated, high-performance, low-voltage systems.
The MAX6061–MAX6068 are available in a 3-pin SOT23
package.
MAX6061–MAX6068
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
ABSOLUTE MAXIMUM RATINGS
Continuous Power Dissipation (TA = +70°C)
3-Pin SOT23 (derate 4.0mW/°C above +70°C)............320mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
(Voltages Referenced to GND)
IN .........................................................................-0.3V to +13.5V
OUT .............................................................-0.3V to (VIN + 0.3V)
Output Short-Circuit Duration to GND or IN (VIN < 6V) ...Continuous
Output Short-Circuit Duration to GND or IN (VIN ≥ 6V)................60s
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—MAX6061, VOUT = 1.25V
(VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
Output Voltage
SYMBOL
VOUT
Output Voltage Temperature
Coefficient (Note 2)
TCVOUT
Line Regulation
∆VOUT/
∆VIN
Load Regulation
∆VOUT/
∆IOUT
OUT Short-Circuit Current
ISC
Long-Term Stability
∆VOUT/
time
Output Voltage Hysteresis (Note 3)
∆VOUT/
cycle
CONDITIONS
MIN
TYP
MAX6061A (0.32%)
1.244
1.248
1.252
MAX6061B (0.48%)
1.242
1.248
1.254
MAX6061A
6
20
MAX6061B
6
30
10
90
TA = +25°C
2.5V ≤ VIN ≥ 12.6V
MAX
Sourcing: 0 ≤ IOUT ≤ 5mA
0.5
0.9
Sinking: -2mA ≤ IOUT ≤ 0
1.3
3.0
UNITS
V
ppm/°C
µV/V
mV/mA
Short to GND
25
Short to IN
25
1000hr at +25°C
62
ppm/
1000hr
130
ppm
f = 0.1Hz to 10Hz
13
µVp-p
f = 10Hz to 10kHz
15
µVRMS
VIN = 5V ± 100mV, f = 120Hz
86
dB
To VOUT = 0.1% of final value, COUT = 50pF
50
µs
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
Ripple Rejection
Turn-On Settling Time
eOUT
∆VOUT/
∆VIN
tR
INPUT CHARACTERISTICS
Supply Voltage Range
VIN
Quiescent Supply Current
IIN
Change in Supply Current
∆IIN/
∆VIN
2
Guaranteed by line regulation test
2.5V ≤ VIN ≤ 12.6V
2.5
12.6
V
90
125
µA
3.4
8.0
µA/V
_______________________________________________________________________________________
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
(VIN = +5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
Output Voltage
SYMBOL
MIN
TYP
MAX
MAX6068A (0.17%)
1.797
1.800
1.803
MAX6068B (0.39%)
1.793
1.800
1.807
MAX6068A
6
20
MAX6068B
6
30
33
200
Sourcing: 0 ≤ IOUT ≤ 5mA
0.5
0.9
Sinking: -2mA ≤ IOUT ≤ 0
1.5
4
Short to GND
25
Short to IN
25
1000hr at +25°C
62
ppm/
1000hr
130
ppm
f = 0.1Hz to 10Hz
22
µVp-p
f = 10Hz to 10kHz
25
µVRMS
VIN = 5V ±100mV, f = 120Hz
86
dB
tR
To VOUT = 0.1% of final value, COUT = 50pF
115
µs
VIN
Guaranteed by line regulation test
VOUT
Output Voltage Temperature
Coefficient (Note 2)
TCVOUT
Line Regulation
∆VOUT/
∆VIN
Load Regulation
∆VOUT/
∆IOUT
OUT Short-Circuit Current
ISC
Long-Term Stability
∆VOUT/
time
Output Voltage Hysteresis (Note 3)
∆VOUT/
cycle
CONDITIONS
TA = +25°C
2.5V ≤ VIN ≥ 12.6V
UNITS
V
ppm/°C
µV/V
mV/mA
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
∆VOUT/
∆VIN
Ripple Rejection
Turn-On Settling Time
INPUT CHARACTERISTICS
Supply Voltage Range
Quiescent Supply Current
IIN
Change in Supply Current
∆IIN/
∆VIN
2.5V ≤ VIN ≤ 12.6V
2.5
12.6
V
90
125
µA
3.3
8.0
µA/V
_______________________________________________________________________________________
3
MAX6061–MAX6068
ELECTRICAL CHARACTERISTICS—MAX6068, VOUT = 1.80V
MAX6061–MAX6068
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
ELECTRICAL CHARACTERISTICS—MAX6062, VOUT = 2.048V
(VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
Output Voltage
SYMBOL
VOUT
Output Voltage Temperature
Coefficient (Note 2)
TCVOUT
Line Regulation
∆VOUT/
∆VIN
Load Regulation
∆VOUT/
∆IOUT
OUT Short-Circuit Current
ISC
Long-Term Stability
∆VOUT/
time
Output Voltage Hysteresis
(Note 3)
∆VOUT/
cycle
CONDITIONS
MIN
TYP
MAX
MAX6062A (0.24%)
2.043
2.048
2.053
MAX6062B (0.39%)
2.040
2.048
2.056
MAX6062A
6
20
MAX6062B
6
30
2.5V ≤ VIN ≤ 12.6V
33
200
TA = +25°C
Sourcing: 0 ≤ IOUT ≤ 5mA
0.5
0.9
Sinking: -2mA ≤ IOUT ≤ 0
1.5
4
UNITS
V
ppm/°C
µV/V
mV/mA
Short to GND
25
Short to IN
25
1000hr at +25°C
62
ppm/
1000hr
130
ppm
f = 0.1Hz to 10Hz
22
µVp-p
f = 10Hz to 10kHz
25
µVRMS
VIN = 5V ±100mV, f = 120Hz
86
dB
To VOUT = 0.1% of final value, COUT = 50pF
115
µs
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
Ripple Rejection
Turn-On Settling Time
eOUT
∆VOUT/
∆VIN
tR
INPUT CHARACTERISTICS
Supply Voltage Range
VIN
Quiescent Supply Current
IIN
Change in Supply Current
IIN/VIN
4
Guaranteed by line-regulation test
2.5V ≤ VIN ≤ 12.6V
2.5
12.6
V
90
125
µA
3.3
8.0
µA/V
_______________________________________________________________________________________
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
(VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
Output Voltage
SYMBOL
VOUT
Output Voltage Temperature
Coefficient (Note 2)
TCVOUT
Line Regulation
∆VOUT/
∆VIN
Load Regulation
∆VOUT/
∆IOUT
Dropout Voltage (Note 4)
VIN VOUT
OUT Short-Circuit Current
ISC
Long-Term Stability
∆VOUT/
time
Output Voltage Hysteresis
(Note 3)
∆VOUT/
cycle
CONDITIONS
MIN
TYP
MAX
MAX6066A (0.2%)
2.495
2.500
2.505
MAX6066B (0.4%)
2.490
2.500
2.510
MAX6066A
6
20
MAX6066B
6
30
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
60
300
Sourcing: 0 ≤ IOUT ≤ 5mA
0.5
0.9
Sinking: -2mA ≤ IOUT ≤ 0
1.6
5
IOUT = 1mA
50
200
Short to GND
25
Short to IN
25
1000hr at +25°C
62
ppm/
1000hr
130
ppm
f = 0.1Hz to 10Hz
27
µVp-p
f = 10Hz to 10kHz
30
µVRMS
VIN = 5V ±100mV, f = 120Hz
86
dB
To VOUT = 0.1% of final value, COUT = 50pF
115
µs
TA = +25°C
UNITS
V
ppm/°C
µV/V
mV/mA
mV
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
∆VOUT/
∆VIN
Ripple Rejection
Turn-On Settling Time
tR
INPUT CHARACTERISTICS
Supply Voltage Range
VIN
Quiescent Supply Current
IIN
Change in Supply Current
IIN/VIN
Guaranteed by line-regulation test
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
VOUT + 0.2
12.6
V
90
125
µA
3.3
8.0
µA/V
_______________________________________________________________________________________
5
MAX6061–MAX6068
ELECTRICAL CHARACTERISTICS—MAX6066, VOUT = 2.500V
MAX6061–MAX6068
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
ELECTRICAL CHARACTERISTICS—MAX6063, VOUT = 3.0V
(VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
Output Voltage
Output Voltage
SYMBOL
VOUT
Output Voltage Temperature
Coefficient (Note 2)
TCVOUT
Line Regulation
∆VOUT/
∆VIN
Load Regulation
∆VOUT/
∆IOUT
Dropout Voltage (Note 4)
VIN VOUT
OUT Short-Circuit Current
ISC
Long-Term Stability
∆VOUT/
time
Output Voltage Hysteresis
(Note 3)
∆VOUT/
cycle
CONDITIONS
MIN
TYP
MAX
MAX6063A (0.2%)
2.994
3.000
3.006
MAX6063B (0.4%)
2.988
3.000
3.012
MAX6063A
6
20
MAX6063B
6
30
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
90
400
Sourcing: 0 ≤ IOUT ≤ 5mA
0.5
0.9
Sinking: -2mA ≤ IOUT ≤ 0
2.0
6.0
IOUT = 1mA
50
200
Short to GND
25
Short to IN
25
1000hr at +25°C
62
ppm/
1000hr
130
ppm
TA = +25°C
UNITS
V
ppm/°C
µV/V
mV/mA
mV
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
Ripple Rejection
Turn-On Settling Time
eOUT
∆VOUT/
∆VIN
tR
f = 0.1Hz to 10Hz
35
µVp-p
f = 10Hz to 10kHz
40
µVRMS
VIN = 5V ±100mV, f = 120Hz
76
dB
To VOUT = 0.1% of final value, COUT = 50pF
115
µs
INPUT CHARACTERISTICS
Supply Voltage Range
VIN
Quiescent Supply Current
IIN
Change in Supply Current
IIN/VIN
6
Guaranteed by line-regulation test
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
VOUT + 0.2
12.6
V
90
125
µA
3.4
8.0
µA/V
_______________________________________________________________________________________
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
(VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
Output Voltage
SYMBOL
VOUT
Output Voltage Temperature
Coefficient (Note 2)
TCVOUT
Line Regulation
∆VOUT/
∆VIN
Load Regulation
∆VOUT/
∆IOUT
Dropout Voltage (Note 4)
VIN VOUT
OUT Short-Circuit Current
ISC
Long-Term Stability
∆VOUT/
time
Output Voltage Hysteresis
(Note 3)
∆VOUT/
cycle
CONDITIONS
MIN
TYP
MAX
MAX6064A (0.2%)
4.088
4.096
4.104
MAX6064B (0.4%)
4.080
4.096
4.112
MAX6064A
6
20
MAX6064B
6
30
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
130
430
Sourcing: 0 ≤ IOUT ≤ 5mA
0.5
0.9
Sinking: -2mA ≤ IOUT ≤ 0
2.2
8
IOUT = 1mA
50
200
Short to GND
25
Short to IN
25
1000hr at +25°C
62
ppm/
1000hr
130
ppm
TA = +25°C
UNITS
V
ppm/°C
µV/V
mV/mA
mV
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
∆VOUT/
∆VIN
Ripple Rejection
Turn-On Settling Time
tR
f = 0.1Hz to 10Hz
50
µVp-p
f = 10Hz to 10kHz
50
µVRMS
VIN = 5V ±100mV, f = 120Hz
72
dB
To VOUT = 0.1% of final value, COUT = 50pF
190
µs
INPUT CHARACTERISTICS
Supply Voltage Range
VIN
Quiescent Supply Current
IIN
Change in Supply Current
IIN/VIN
Guaranteed by line-regulation test
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
VOUT + 0.2
12.6
V
90
125
µA
3.2
8.0
µA/V
_______________________________________________________________________________________
7
MAX6061–MAX6068
ELECTRICAL CHARACTERISTICS—MAX6064, VOUT = 4.096V
MAX6061–MAX6068
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
ELECTRICAL CHARACTERISTICS—MAX6067, VOUT = 4.500V
(VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
Output Voltage
SYMBOL
VOUT
Output Voltage Temperature
Coefficient (Note 2)
TCVOUT
Line Regulation
∆VOUT/
∆VIN
Load Regulation
∆VOUT/
∆IOUT
Dropout Voltage (Note 4)
VIN VOUT
OUT Short-Circuit Current
ISC
Long-Term Stability
∆VOUT/
time
Output Voltage Hysteresis
(Note 3)
∆VOUT/
cycle
CONDITIONS
MIN
TYP
MAX
MAX6067A (0.2%)
4.491
4.500
4.509
MAX6067B (0.4%)
4.482
4.500
4.518
MAX6067A
6
20
MAX6067B
6
30
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
170
550
TA = +25°C
UNITS
V
ppm/°C
µV/V
Sourcing: 0 ≤ IOUT ≤ 5mA
0.5
0.9
Sinking: -2mA ≤ IOUT ≤ 0
2.4
8
IOUT = 1mA
50
200
Short to GND
25
Short to IN
25
1000hr at +25°C
62
ppm/
1000hr
130
ppm
f = 0.1Hz to 10Hz
55
µVp-p
f = 10Hz to 10kHz
55
µVRMS
VIN = 5V ±100mV, f = 120Hz
70
dB
To VOUT = 0.1% of final value, COUT = 50pF
230
µs
mV/mA
mV
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
Ripple Rejection
Turn-On Settling Time
eOUT
∆VOUT/
∆VIN
tR
INPUT CHARACTERISTICS
Supply Voltage Range
VIN
Quiescent Supply Current
IIN
Change in Supply Current
IIN/VIN
8
Guaranteed by line-regulation test
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
VOUT + 0.2
12.6
V
90
125
µA
3.2
8.0
µA/V
_______________________________________________________________________________________
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
(VIN = +5.2V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
Output Voltage
SYMBOL
VOUT
Output Voltage Temperature
Coefficient (Note 2)
TCVOUT
Line Regulation
∆VOUT/
∆VIN
Load Regulation
∆VOUT/
∆IOUT
Dropout Voltage (Note 4)
VIN VOUT
OUT Short-Circuit Current
ISC
Long-Term Stability
∆VOUT/
time
Output Voltage Hysteresis
(Note 3)
∆VOUT/
cycle
CONDITIONS
MIN
TYP
MAX
MAX6065A (0.2%)
4.990
5.000
5.010
MAX6065B (0.4%)
4.980
5.000
5.020
MAX6065A
6
20
MAX6065B
6
30
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
180
550
Sourcing: 0 ≤ IOUT ≤ 5mA
0.5
0.9
Sinking: -2mA ≤ IOUT ≤ 0
2.4
8.0
IOUT = 1mA
50
200
TA = +25°C
UNITS
V
ppm/°C
µV/V
mV/mA
mV
Short to GND
25
Short to IN
25
1000hr at +25°C
62
ppm/
1000hr
130
ppm
mA
DYNAMIC CHARACTERISTICS
Noise Voltage
eOUT
∆VOUT/
∆VIN
Ripple Rejection
Turn-On Settling Time
tR
f = 0.1Hz to 10Hz
60
µVp-p
f = 10Hz to 10kHz
60
µVRMS
VIN = 5V ±100mV, f = 120Hz
65
dB
To VOUT = 0.1% of final value, COUT = 50pF
300
µs
INPUT CHARACTERISTICS
Supply Voltage Range
VIN
Quiescent Supply Current
IIN
Change in Supply Current
IIN/VIN
Note 1:
Note 2:
Note 3:
Note 4:
Guaranteed by line-regulation test
(VOUT + 0.2V) ≤ VIN ≤ 12.6V
VOUT + 0.2
12.6
V
90
125
µA
3.2
8.0
µA/V
All devices are 100% production tested at TA = +25°C and are guaranteed by design for TA = TMIN to TMAX, as specified.
Temperature Coefficient is measured by the “box” method, i.e., the maximum ∆VOUT is divided by the maximum ∆T.
Temperature Hysteresis is defined as the change in +25°C output voltage before and after cycling the device from TMIN to TMAX.
Dropout voltage is the minimum input voltage at which VOUT changes ≤ 0.2% from VOUT at VIN = 5.0V (VIN = 5.5V for MAX6065).
_______________________________________________________________________________________
9
MAX6061–MAX6068
ELECTRICAL CHARACTERISTICS—MAX6065, VOUT = 5.000V
Typical Operating Characteristics
(VIN = +5V for MAX6061–MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25°C, unless otherwise noted.) (Note 5)
OUTPUT VOLTAGE (V)
5.002
2.049
2.048
2.047
5.001
5.000
4.999
2.046
-15
10
35
60
-200
-15
10
35
60
2
85
4
6
8
10
MAX6065
LINE REGULATION
MAX6061
LOAD REGULATION
MAX6065
LOAD REGULATION
TA = +25°C
-800
-1000
TA = +85°C
3
2
1
TA = -40°C
0
TA = +25°C
-1
12
9
11
13
8
6
4
TA = +25°C
2
0
-2
-4
-3
7
TA = +85°C
10
-2
-1200
-4
-2
0
2
12
MAX6061/68 toc06
4
OUTPUT VOLTAGE CHANGE (mV)
TA = +85°C
5
MAX6061/68 toc05
MAX6061/68 toc04
TA = -40°C
TA = -40°C
-6
4
-6
-4
-2
0
2
4
6
INPUT VOLTAGE (V)
LOAD CURRENT (mA)
LOAD CURRENT (mA)
MAX6066
DROPOUT VOLTAGE
vs. LOAD CURRENT
MAX6065
DROPOUT VOLTAGE
vs. LOAD CURRENT
MAX6061
POWER-SUPPLY REJECTION RATIO
vs. FREQUENCY
0.20
TA = +25°C
0.15
0.10
TA = -40°C
-20
-30
0.15
TA = +25°C
TA = -40°C
0.10
-40
-50
-60
-70
0.05
0.05
MAX6061/68 toc09
MAX6061/68 toc08
TA = +85°C
0.20
0
-10
PSRR (dB)
TA = +85°C
0.25
DROPOUT VOLTAGE (V)
MAX6061/68 toc07
0.30
0.25
-100
TEMPERATURE (°C)
-200
5
TA = +85°C
TA = -40°C
0
TEMPERATURE (°C)
0
-600
100
INPUT VOLTAGE (V)
200
-400
-40
85
TA = +25°C
200
-300
4.998
-40
-80
0
0
0
1
2
3
LOAD CURRENT (mA)
10
300
OUTPUT VOLTAGE CHANGE (µV)
THREE
TYPICAL PARTS
OUTPUT VOLTAGE CHANGE (mV)
OUTPUT VOLTAGE (V)
2.050
MAX6061/68 toc02
THREE TYPICAL PARTS
OUTPUT VOLTAGE CHANGE (µV)
5.003
MAX6061/68 toc01
2.051
MAX6061
LINE REGULATION
MAX6065
OUTPUT VOLTAGE TEMPERATURE DRIFT
MAX6061/68 toc03
MAX6062
OUTPUT VOLTAGE TEMPERATURE DRIFT
DROPOUT VOLTAGE (V)
MAX6061–MAX6068
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
4
5
-90
0
1
2
3
LOAD CURRENT (mA)
4
5
0.001
0.01
0.1
1
10
FREQUENCY (kHz)
______________________________________________________________________________________
100
1000
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
-30
-40
-50
90
80
-60
105
100
95
90
85
-70
80
70
-80
0.1
10
6
8
10
5
12
7
9
11
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
MAX6061
SUPPLY CURRENT
vs. TEMPERATURE
MAX6065
SUPPLY CURRENT
vs. TEMPERATURE
MAX6061
OUTPUT IMPEDANCE
vs. FREQUENCY
VIN = 7.5V
90
VIN = 5.5V
VIN = 12.5V
105
VIN = 7.5V
95
VIN = 5.5V
13
MAX6061/68 toc15
220
200
180
OUTPUT IMPEDANCE (Ω)
SUPPLY CURRENT (µA)
110
VIN = 2.5V
115
MAX6061/68 toc13
VIN = 12.5V
80
4
FREQUENCY (kHz)
120
100
2
1000
MAX6061/68 toc14
0.001
SUPPLY CURRENT (µA)
MAX6061/68 toc12
100
110
SUPPLY CURRENT (µA)
PSRR (dB)
-20
115
MAX6061/68 toc11
-10
110
SUPPLY CURRENT (µA)
MAX6061/68 toc10
0
MAX6065
SUPPLY CURRENT
vs. INPUT VOLTAGE
MAX6061
SUPPLY CURRENT
vs. INPUT VOLTAGE
MAX6065
POWER-SUPPLY REJECTION RATIO
vs. FREQUENCY
160
140
120
100
80
60
40
20
85
70
-15
10
35
60
0
-40
-15
10
35
60
85
0.001
0.1
10
TEMPERATURE (°C)
TEMPERATURE (°C)
FREQUENCY (kHz)
MAX6065
OUTPUT IMPEDANCE
vs. FREQUENCY
MAX6061
0.1Hz TO 10Hz OUTPUT NOISE
MAX6065
NOISE
160
140
MAX6061/68 toc17
MAX6061/68 toc16
180
OUTPUT IMPEDANCE (Ω)
85
1000
MAX6061/68 toc18
-40
120
100
VOUT
10µV/div
VOUT
10µV/div
80
60
40
20
0
0.001
0.1
10
1000
1s/div
1s/div
FREQUENCY (kHz)
______________________________________________________________________________________
11
MAX6061–MAX6068
Typical Operating Characteristics (continued)
(VIN = +5V for MAX6061–MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25°C, unless otherwise noted.) (Note 5)
Typical Operating Characteristics (continued)
(VIN = +5V for MAX6061–MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25°C, unless otherwise noted.) (Note 5)
VOUT
500mV/div
MAX6061/68 toc20
MAX6065
TURN-ON TRANSIENT
(CL = 50pF)
MAX6061
TURN-ON TRANSIENT
(CL = 50pF)
MAX6061/68 toc19
MAX6061–MAX6068
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
VOUT
2V/div
VIN
5V/div
VIN
5V/div
10µs/div
40µs/div
MAX6061
LOAD TRANSIENT
(IOUT = ±250µA, VIN = 5.0, CL = 0)
MAX6065
LOAD TRANSIENT
(IOUT = ±250µA, CL = 0, VIN = 5.5V)
MAX6061/68 toc21
MAX6061/68 toc22
IOUT
+250µA
IOUT
-250µA
IOUT
500µA/div
VOUT
AC-COUPLED
100mV/div
+250µA
IOUT
500µA/div
-250µA
VOUT
AC-COUPLED
50mV/div
400µs/div
400µs/div
MAX6061
LOAD TRANSIENT
(IOUT = ±250µA, VIN = 5.0V, CL = 1µF)
MAX6065
LOAD TRANSIENT
(IOUT = ±250µA, CL = 1µF, VIN = 5.5V)
MAX6061/68 toc24
MAX6061/68 toc23
+250µA
IOUT
500µA/div
-250µA
-250µA
VOUT
AC-COUPLED
20mV/div
VOUT
AC-COUPLED
10mV/div
400µs/div
12
+250µA
IOUT
500µA/div
400µs/div
______________________________________________________________________________________
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
MAX6061
LOAD TRANSIENT
(VIN = 5.0V, CL = 0, IOUT = ±2mA)
MAX6065
LOAD TRANSIENT
(CL = 0, IOUT = ±2mA, VIN = 5.5V)
MAX6061/68 toc25
MAX6061/68 toc26
+2mA
IOUT
5mA/div
-2mA
VOUT
AC-COUPLED
100mV/div
+2mA
IOUT
5mA/div
-2mA
VOUT
AC-COUPLED
50mV/div
400µs/div
400µs/div
MAX6061
LOAD TRANSIENT
(VIN = 5.0V, CL = 1µF, IOUT = ±2mA)
MAX6065
LOAD TRANSIENT
(CL = 1µF, IOUT = ±2mA, VIN = 5.5V)
MAX6061/68 toc28
MAX6061/68 toc27
+2mA
+2mA
IOUT
5mA/div
-2mA
VOUT
AC-COUPLED
50mV/div
IOUT
5mA/div
-2mA
VOUT
AC-COUPLED
20mV/div
400µs/div
400µs/div
MAX6061
LOAD TRANSIENT
(VIN = 5.0V, CL = 0, IOUT = ±4mA)
MAX6065
LOAD TRANSIENT
(IOUT = ±5mA, CL = 0, VIN = 5.5V)
MAX6061/68 toc29
MAX6061/68 toc30
+5mA
+4mA
IOUT
5mA/div
-4mA
IOUT
5mA/div
-5mA
VOUT
AC-COUPLED
100mV/div
VOUT
AC-COUPLED
200mV/div
400µs/div
400µs/div
______________________________________________________________________________________
13
MAX6061–MAX6068
Typical Operating Characteristics (continued)
(VIN = +5V for MAX6061–MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25°C, unless otherwise noted.) (Note 5)
MAX6061–MAX6068
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
Typical Operating Characteristics (continued)
(VIN = +5V for MAX6061–MAX6068, VIN = +5.5V for MAX6065, IOUT = 0, TA = +25°C, unless otherwise noted.) (Note 5)
MAX6061
LOAD TRANSIENT
(VIN = 5.0V, CL = 1µF, IOUT = ±4mA)
MAX6065
LOAD TRANSIENT
(IOUT = ±5mA, CL = 1µF, VIN = 5.5V)
MAX6061/68 toc31
MAX6061/68 toc32
+4mA
IOUT
5mA/div
+5mA
IOUT
5mA/div
-4mA
VOUT
AC-COUPLED
50mV/div
-5mA
VOUT
AC-COUPLED
50mV/div
400µs/div
400µs/div
MAX6061
LINE TRANSIENT
(CL = 0)
MAX6065
LINE TRANSIENT
(CL = 0)
MAX6061/68 toc33
MAX6061/68 toc34
+0.25
VIN
500mV/div
-0.25
VOUT
AC-COUPLED
20mV/div
+0.25
VIN
500mV/div
-0.25
VOUT
AC-COUPLED
20mV/div
40µs/div
40µs/div
Note 5: Many of the MAX6061 family Typical Operating Characteristics are extremely similar. The extremes of these characteristics
are found in the MAX6061 (1.25V output) and the MAX6065 (5.0V output). The Typical Operating Characteristics of the
remainder of the MAX6061 family, typically lie between these two extremes and can be estimated based on their output
voltages.
14
______________________________________________________________________________________
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
PIN
NAME
1
IN
2
OUT
Reference Output
3
GND
Ground
Typical Operating Circuit
FUNCTION
+SUPPLY INPUT (SEE SELECTOR GUIDE)
Input Voltage
IN
OUT
REFERENCE
OUT
MAX6061MAX6068
*
Applications Information
Input Bypassing
For the best line-transient performance, decouple the
input with a 0.1µF ceramic capacitor as shown in the
Typical Operating Circuit. Locate the capacitor as close
to IN as possible. Where transient performance is less
important, no capacitor is necessary.
Output/Load Capacitance
Devices in the MAX6061 family do not require an output
capacitance for frequency stability. In applications
where the load or the supply can experience step
changes, an output capacitor of at least 0.1µF will
reduce the amount of overshoot (undershoot) and
improve the circuit’s transient response. Many applications do not require an external capacitor, and the
MAX6061 family can offer a significant advantage in
these applications when board space is critical.
Supply Current
The quiescent supply current of the series-mode
MAX6061 family is typically 90µA and is virtually independent of the supply voltage, with only an 8µA/V (max)
variation with supply voltage. Unlike series references,
shunt-mode references operate with a series resistor
connected to the power supply. The quiescent current
of a shunt-mode reference is thus a function of the input
voltage. Additionally, shunt-mode references have to
be biased at the maximum expected load current, even
if the load current is not present at the time. In the
MAX6061 family, the load current is drawn from the
input voltage only when required, so supply current is
not wasted and efficiency is maximized at all input voltages. This improved efficiency reduces power dissipation and extends battery life. When the supply voltage
is below the minimum specified input voltage (as during
turn-on), the devices can draw up to 400µA beyond the
nominal supply current. The input voltage source must
be capable of providing this current to ensure reliable
turn-on.
GND
1µF *
*CAPACITORS ARE OPTIONAL.
Ordering Information (continued)
PART
TEMP. RANGE
PINPACKAGE
TOP
MARK
MAX6067AEUR-T
MAX6067BEUR-T
MAX6068AEUR-T
MAX6068BEUR-T
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
3 SOT23-3
3 SOT23-3
3 SOT23-3
3 SOT23-3
FZFS
FZFT
FZIB
FZIC
Output Voltage Hysteresis
Output voltage hysteresis is the change of output voltage
at TA = +25°C before and after the device is cycled
over its entire operating temperature range. Hysteresis
is caused by differential package stress appearing
across the bandgap core transistors. The typical temperature hysteresis value is 130ppm.
Turn-On Time
These devices typically turn on and settle to within 0.1%
of their final value in 50µs to 300µs, depending on the
device. The turn-on time can increase up to 1.5ms with
the device operating at the minimum dropout voltage and
the maximum load.
Chip Information
TRANSISTOR COUNT: 117
PROCESS: BiCMOS
______________________________________________________________________________________
15
MAX6061–MAX6068
Pin Description
Precision, Micropower, Low-Dropout,
High-Output-Current, SOT23 Voltage References
SOTPO3L.EPS
MAX6061–MAX6068
Package Information
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
16 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2001 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
Similar pages