Kersemi MBR10H90 Plastic package has underwriters laboratory flammability classifications 94v-0 Datasheet

MBR10H100, MBRF10H100 & MBRB10H100
ITO-220AC (MBRF10H90, MBRF10H100)
0.188 (4.77)
0.172 (4.36)
0.405 (10.27)
0.383 (9.72)
TO-220AC (MBR10H90, MBR10H100)
0.110 (2.80)
0.100 (2.54)
0.140 (3.56)
DIA.
0.130 (3.30)
0.185 (4.70)
0.415 (10.54) MAX.
0.175 (4.44)
0.154 (3.91)
0.370 (9.40)
0.360 (9.14)
0.148 (3.74)
DIA.
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.676 (17.2)
0.646 (16.4)
0.600 (15.5)
0.580 (14.5)
0.350 (8.89)
0.330 (8.38)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
0.350 (8.89)
0.330 (8.38)
0.635 (16.13)
0.625 (15.87)
PIN
1
2
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
1.148 (29.16)
1.118 (28.40)
0.160 (4.06)
0.140 (3.56)
2
0.603 (15.32)
0.573 (14.55)
PIN
1
PIN 1
0.560 (14.22)
0.530 (13.46)
PIN 1
CASE
0.105 (2.67)
0.037 (0.94)
0.027 (0.68)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
0.110 (2.80)
0.100 (2.54)
0.060 (1.52)
0.110 (2.79)
0.100 (2.54)
PIN 2
0.131 (3.39)
DIA.
0.122 (3.08)
PIN 2
0.037 (0.94)
0.027 (0.69)
0.205 (5.20)
0.195 (4.95)
0.022 (0.55)
0.014 (0.36)
TO-263AB (MBRB10H90, MBRB10H100)
0.022 (0.56)
0.014 (0.36)
0.190 (4.83)
0.411 (10.45)
0.380 (9.65)
0.160 (4.06)
0.055 (1.40)
0.045 (1.14)
0.245 (6.22)
MIN
Mounting Pad Layout TO-263AB
K
0.42
(10.66)
0.047 (1.19)
1
Dimensions in inches
and (millimeters)
0.63
(17.02)
0.055 (1.40)
0.360 (9.14)
0.320 (8.13)
0.33
(8.38)
K
2
0.624 (15.85)
0.591 (15.00)
0-0.01 (0-0.254)
0.110 (2.79)
0.090 (2.29)
0.027 (0.686)
0.037 (0.940)
0.105 (2.67)
0.08
(2.032)
0.24
(6.096)
0.12
(3.05)
0.095 (2.41)
0.021 (0.53)
0.014 (0.36)
PIN 1
PIN 2
0.205 (5.20)
K - HEATSINK
0.140 (3.56)
0.110 (2.79)
0.195 (4.95)
Features
Mechanical Data
• Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
• Metal silicon junction, majority carrier conduction
• Low power loss, high efficiency
• Guardring for overvoltage protection
• For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Case: JEDEC TO-220AC, ITO-220AC & TO-263AB
molded plastic body
Terminals: Plated leads, solderable per
MIL-STD-750, Method 2026
High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
(TO-220AC & ITO-220AC) at terminals (TO-263AB)
Polarity: As marked Mounting Position: Any
Mounting Torque: 10 in-lbs maximum
Weight: 0.08 oz., 2.24 g
Packaging Codes: see next page
www.kersemi.com
1
MBR10H100, MBRF10H100 & MBRB10H100
Maximum Ratings
(TC = 25°C unless otherwise noted)
Parameter
Symbol
MBR10H90
MBR10H100
Unit
Maximum repetitive peak reverse voltage
VRRM
90
100
V
Working peak reverse voltage
VRWM
90
100
V
Maximum DC blocking voltage
VDC
90
100
V
Maximum average forward rectified current
IF(AV)
10
A
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
250
A
Peak repetitive reverse current at tp = 2µs, 1KHZ
IRRM
0.5
A
Voltage rate of change (rated VR)
dv/dt
10,000
V/µs
TJ, TSTG
–65 to +175
°C
Operating junction and storage temperature range
(1)
4500
3500(2)
1500(3)
V
Symbol
Value
Unit
25°C
125°C
25°C
125°C
VF
0.77
0.64
0.88
0.73
V
TJ = 25°C
TJ = 125°C
IR
4.5
6.0
µA
mA
RMS Isolation voltage (MBRF type only) from terminals to
heatsink with t = 1 second, RH ≤ 30%
Electrical Characteristics (T
C
= 25°C unless otherwise noted)
Parameter
Maximum instantaneous
forward voltage at(4):
IF =
IF =
IF =
IF =
10A,
10A,
20A,
20A,
TC =
TC =
TC =
TC =
Maximum reverse current
at working peak reverse voltage(4)
Thermal Characteristics (T
C
VISOL
= 25°C unless otherwise noted)
Parameter
Typical thermal resistance
Symbol
MBR
MBRF
MBRB
Unit
RθJC
2.7
5.8
2.7
°C/W
Notes:
(1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset
(2) Clip mounting (on case), where leads do overlap heatsink
(3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”)
(4) Pulse test: 300µs pulse width, 1% duty cycle
Ordering Information
Product
Case
Package Code
MBR10H90 - MBR10H100
TO-220AC
45
Anti-Static tube, 50/tube, 2K/carton
MBRF10H90 - MBRF10H100
ITO-220AC
45
Anti-Static tube, 50/tube, 2K/carton
MBRB10H90 - MBRB10H100
TO-263AB
31
45
81
13” reel, 800/reel, 4.8K/carton
Anti-Static tube, 50/tube, 2K/carton
Anti-Static 13” reel, 800/reel, 4.8K/carton
www.kersemi.com
2
Package Option
MBR10H100, MBRF10H100 & MBRB10H100
20
300
250
16
200
MBR
MBRB
12
150
8
100
4
50
MBRF
0
0
50
0
150
100
180
IR - Instantaneous Reverse Current (µA)
100
TJ = 175°C
10
TJ = 125°C
TJ=150°C
TJ = 100°C
1.0
TJ = 25°C
0.1
0.01
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.0
Fig. 5 - Typical Junction Capacitance
Per Leg
10000
TJ = 150°C
1000
TJ = 125°C
100
TJ = 100°C
10
1.0
TJ = 25°C
0.1
0.01
20
40
60
80
100
Fig. 6 - Typical Transient Thermal Impedance
Per Leg
10000
Transient Thermal Impedance (°C/W)
100
1000
100
10
0.1
100
10
1
10
100
10
1
0.1
0.01
0.1
1
10
www.kersemi.com
3
Similar pages