Vishay MBR2035CTTRRP Schottky rectifier, 2 x 10 a Datasheet

VS-MBRB20..CTPbF, VS-MBR20..CT-1PbF Series
Vishay High Power Products
Schottky Rectifier, 2 x 10 A
VS-MBRB20..CTPbF
FEATURES
VS-MBR20..CT-1PbF
• 150 °C TJ operation
• Center tap D2PAK and TO-262 packages
• Low forward voltage drop
• High frequency operation
Base
common
cathode
2
Base
common
cathode
2
• High purity, high temperature epoxy
encapsulation for enhanced mechanical
strength and moisture resistance
• Guard ring for enhanced ruggedness and long term
reliability
2
1 Common
3
Anode cathode Anode
2
1 Common
3
Anode cathode Anode
D2PAK
TO-262
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• Halogen-free according to IEC 61249-2-21 definition
• Compliant to RoHS directive 2002/95/EC
• AEC-Q101 qualified
DESCRIPTION
PRODUCT SUMMARY
IF(AV)
2 x 10 A
VR
35 V/45 V
IRM
15 mA at 125 °C
This center tap Schottky rectifier has been optimized for
low reverse leakage at high temperature. The proprietary
barrier technology allows for reliable operation up to 150 °C
junction temperature. Typical applications are in switching
power supplies, converters, freewheeling diodes, and
reverse battery protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
VALUES
IF(AV)
Rectangular waveform (per device)
20
IFRM
TC = 135 °C (per leg)
20
UNITS
A
VRRM
IFSM
tp = 5 μs sine
VF
10 Apk, TJ = 125 °C
TJ
Range
35/45
V
1060
A
0.57
V
- 65 to 150
°C
VOLTAGE RATINGS
PARAMETER
Maximum DC reverse voltage
Maximum working peak reverse voltage
Document Number: 94305
Revision: 16-Mar-10
SYMBOL
VR
VS-MBRB2035CTPbF
VS-MBR2035CT-1PbF
VS-MBRB2045CTPbF
VS-MBR2045CT-1PbF
UNITS
35
45
V
VRWM
For technical questions, contact: [email protected]
www.vishay.com
1
VS-MBRB20..CTPbF, VS-MBR20..CT-1PbF Series
Vishay High Power Products Schottky Rectifier, 2 x 10 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Maximum average
forward current
SYMBOL
per leg
per device
Peak repetitive forward current per leg
Non-repetitive peak surge current
Non-repetitive avalanche energy per leg
TEST CONDITIONS
TC = 135 °C, rated VR
IFRM
Rated VR, square wave, 20 kHz, TC = 135 °C
IFSM
UNITS
10
IF(AV)
5 μs sine or
3 μs rect. pulse
VALUES
20
Following any rated load condition
and with rated VRRM applied
Surge applied at rated load conditions halfwave,
single phase, 60 Hz
20
A
1060
150
EAS
TJ = 25 °C, IAS = 2 A, L = 4 mH
8
mJ
IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum
VA = 1.5 x VR typical
2
A
VALUES
UNITS
Repetitive avalanche current per leg
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
20 A
Maximum forward voltage drop
VFM (1)
TJ = 25 °C
10 A
TJ = 125 °C
20 A
Maximum instantaneous
reverse current
IRM (1)
Threshold voltage
VF(TO)
TJ = 25 °C
Rated DC voltage
TJ = 125 °C
TJ = TJ maximum
0.84
0.57
V
0.72
0.1
15
mA
0.354
V
Forward slope resistance
rt
17.6
mΩ
Maximum junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C
600
pF
Typical series inductance
LS
Measured from top of terminal to mounting plane
8.0
nH
10 000
V/μs
VALUES
UNITS
Maximum voltage rate of change
dV/dt
Rated VR
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum junction temperature range
TJ
- 65 to 150
Maximum storage temperature range
TStg
- 65 to 175
Maximum thermal resistance,
junction to case per leg
RthJC
DC operation
2.0
Typical thermal resistance,
case to heatsink
RthCS
Mounting surface, smooth and greased
0.50
°C/W
Approximate weight
Mounting torque
Marking device
www.vishay.com
2
°C
minimum
maximum
Non-lubricated threads
2
g
0.07
oz.
6 (5)
kgf · cm
(lbf · in)
12 (10)
Case style D2PAK
MBRB2045CT
Case style TO-262
MBR2045CT-1
For technical questions, contact: [email protected]
Document Number: 94305
Revision: 16-Mar-10
VS-MBRB20..CTPbF, VS-MBR20..CT-1PbF Series
100
100
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
10
1
0.2
IR - Reverse Current (mA)
IF - Instantaneous Forward Current (A)
Schottky Rectifier, 2 x 10 A Vishay High Power Products
10
TJ = 150 °C
TJ = 125 °C
1
TJ = 100 °C
0.1
TJ = 75 °C
TJ = 50 °C
0.01
TJ = 25 °C
0.001
0.0001
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
1.8
5
10
15
20
25
30
35
40
45
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
(Per Leg)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage (Per Leg)
CT - Junction Capacitance (pF)
1000
TJ = 25 °C
100
0
10
20
30
40
50
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)
10
1
PDM
t1
t2
0.1
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
Single pulse
(thermal resistance)
0.01
0.00001
0.0001
0.001
0.01
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
0.1
1
10
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Document Number: 94305
Revision: 16-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
3
VS-MBRB20..CTPbF, VS-MBR20..CT-1PbF Series
10
150
145
Average Power Loss (W)
Allowable Case Temperature (°C)
Vishay High Power Products Schottky Rectifier, 2 x 10 A
DC
140
135
Square wave (D = 0.50)
Rated VR applied
130
125
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
8
RMS limit
6
4
DC
2
See note (1)
120
0
0
3
6
9
12
15
0
2
4
6
8
10
12
14
16
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
1000
At any rated load condition
and with rated VRRM applied
following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
Note
Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
(1)
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94305
Revision: 16-Mar-10
VS-MBRB20..CTPbF, VS-MBR20..CT-1PbF Series
Schottky Rectifier, 2 x 10 A Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
VS- MBR
2
1
B
20
45
CT
-1
3
4
5
6
7
1
-
HPP product suffix
2
-
Essential part number
3
-
4
-
None = TO-262 7 = -1
Current rating (20 = 20 A)
5
-
Voltage ratings
6
-
CT = Essential part number
7
-
8
-
B = D2PAK
7
TRL PbF
8
9
None
35 = 35 V
45 = 45 V
None = D2PAK
3
=B
-1 = TO-262
3
None
None = Tube (50 pieces)
TRL = Tape and reel (left oriented - for D2PAK only )
TRR = Tape and reel (right oriented - for D2PAK only)
9
-
PbF = Lead (Pb)-free (for TO-262 and D2PAK tube)
P = Lead (Pb)-free (for D2PAK TRR and TRL)
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95014
Part marking information
www.vishay.com/doc?95008
Packaging information
www.vishay.com/doc?95032
Document Number: 94305
Revision: 16-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages