Freescale MC68HC08JB16DW Addendum to mc68hc908jb16 technical datum Datasheet

Freescale Semiconductor, Inc.
Addendum
HC908JB16AD/D
Rev. 1, 8/2002
Freescale Semiconductor, Inc...
Addendum to
MC68HC908JB16
Technical Data
This addendum provides update and additional information to the
MC68HC908JB16 Technical Data, Rev. 1
(Motorola document number MC68HC908JB16/D),
pertaining to the following:
•
MC68HC908JB16
– Update to VREG LVI trip point
– 20-pin SOIC package
•
MC68HC908JB12
•
MC68HC08JB16
MC68HC908JB16
This section updates data sheet information and introduces the 20-pin SOIC
package for the MC68HC908JB16.
VREG LVI Trip Point
Page 318, entry for minimum VREG LVI trip point voltage has been updated.
From:
Characteristic
VREG LVI trip point voltage
Symbol
Min
Typ
Max
Unit
VLVR
2.0
2.2
2.6
V
VLVR
1.9
2.2
2.6
V
To:
VREG LVI trip point voltage
For More Information On This Product,
Go to: www.freescale.com
Freescale Semiconductor, Inc.
HC908JB16AD/D
Freescale Semiconductor, Inc...
20-Pin SOIC
Order Number: MC68HC908JB16JDW
VSS
1
20
RST
OSC1
2
19
PTA0/KBA0
OSC2
3
18
PTA1/KBA1
VREG
4
17
PTA2/KBA2
VDD
5
16
PTA3/KBA3
PTD0/1
6
15
PTA4/KBA4
PTE1/T1CH01
7
14
PTA5/KBA5
PTE3/D+
8
13
PTA6/KBA6
Internal pads are unconnected.
PTE4/D–
9
12
PTA7/KBA7
PTC0/TxD
10
11
IRQ
PTD0/1 pin: PTD0 and PTD1 internal pads are bonded together to PTD0/1 pin,
and has 50mA sink capability when configured as an output.
Pin direction must be configured such that DDRD0 = DDRD1.
Pins not available on 20-pin package:
PTC1/RxD
PTE0/TCLK
PTD2
PTE2/T2CH01
PTD3
CGMXFC1
CGMXFC2
PTD4
CGMOUT1
CGMOUT2
PTD5
VREGA0
VREGA1
VSSA0
VSSA1
VDDA
Figure 1. 20-Pin SOIC Pin Assignment
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.150
(0.006) PER SIDE.
5. DIMENSION D DOES NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.13
(0.005) TOTAL IN EXCESS OF D DIMENSION
AT MAXIMUM MATERIAL CONDITION.
–A–
20
11
–B–
10X
P
0.010 (0.25)
1
M
B
M
10
20X
D
0.010 (0.25)
M
T A
B
S
J
S
F
R X 45 _
C
–T–
18X
G
K
SEATING
PLANE
DIM
A
B
C
D
F
G
J
K
M
P
R
MILLIMETERS
MIN
MAX
12.65
12.95
7.40
7.60
2.35
2.65
0.35
0.49
0.50
0.90
1.27 BSC
0.25
0.32
0.10
0.25
0_
7_
10.05
10.55
0.25
0.75
M
Figure 2. 20-Pin SOIC Mechanical Dimensions (Case No. 751D)
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
INCHES
MIN
MAX
0.499
0.510
0.292
0.299
0.093
0.104
0.014
0.019
0.020
0.035
0.050 BSC
0.010
0.012
0.004
0.009
0_
7_
0.395
0.415
0.010
0.029
Freescale Semiconductor, Inc.
HC908JB16AD/D
MC68HC908JB12
MC68HC908JB12
This section introduces the MC68HC908JB12, a derivative of the
MC68HC908JB16. The entire MC68HC908JB16 data book, including the
updates in this addendum, applies to this device, with exceptions outlined
below.
Table 1. Summary of MC68HC908JB12 and MC68HC908JB16 Differences
Freescale Semiconductor, Inc...
MC68HC908JB12
MC68HC908JB16
FLASH Memory
12,288 bytes
($CA00–$F9FF)
16,384 bytes
($BA00–$F9FF)
Dual Clock Generator Module
Not implemented.
$0051–$0059 unimplemented.
Available in 32-pin LQFP only.
Available Packages(1)
—
28-pin SOIC
20-pin SOIC
32-pin LQFP
28-pin SOIC
20-pin SOIC
Notes:
1. The pin assignments are identical for both devices; see data sheet.
MCU Block Diagram
Figure 3 shows the structure of the MC68HC908JB12.
Memory Map
Figure 4 shows the memory map of the MC68HC908JB12.
Dual Clock
Generator Module
The dual 27-MHz clock generator module on the MC68HC908JB16 is not
designed in the MC68HC908JB12, hence, register locations from $0051 to
$0059 are unimplemented. Information in the data book relating to the CGM do
not apply to the MC68HC908JB12.
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
RST
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
VDD
VSS
VREG (3.3V)
(3) IRQ
(2)
OSC1
(1)
OSC2
(1)
ARITHMETIC/LOGIC
UNIT (ALU)
POWER AND INTERNAL
VOLTAGE REGULATORS
IRQ
MODULE
SYSTEM INTEGRATION
MODULE
OSCILLATOR
USER FLASH VECTORS — 48 BYTES
MONITOR ROM — 1,472 BYTES
USER RAM — 384 BYTES
USER FLASH MEMORY — 12,288 BYTES
LS USB
TRANSCEIVER
(3)
(3), (4)
PTE0/TCLK (3), (6)
PTE1/T1CH01 (3)
PTE2/T2CH01 (3), (6)
PTE3/D+
PTE4/D– (3), (4)
PTD0 (4), (7)
PTD1 (4), (7)
PTD2 (4), (6)
PTD3 (4), (6)
PTD4 (4), (6)
PTD5 (4), (6)
PTC0/TxD (3)
PTC1/RxD (3), (6)
PTA7/KBA7
:
PTA0/KBA0
(6) Pins available on 28-pin package only.
(7) On 20-pin package, PTD0 and PTD1 are bonded as a single PTD0/1 pin.
(1) Pins have 3V logic.
(2) Pins have integrated pullup device.
(3) Pins have software configurable pullup device.
(4) Pins are open-drain when configured as output.
USB ENDPOINT 0, 1, 2
USB MODULE
2-CHANNEL TIMER INTERFACE
MODULE 2
2-CHANNEL TIMER INTERFACE
MODULE 1
COMPUTER OPERATING
PROPERLY MODULE
POWER-ON RESET
MODULE
LOW VOLTAGE INHIBIT
MODULE
SERIAL COMMUNICATIONS
INTERFACE MODULE
BREAK
MODULE
KEYBOARD INTERRUPT
MODULE
DDRA
INTERNAL BUS
Figure 3. MC68HC908JB12 Block Diagram
CONTROL AND STATUS REGISTERS — 128 BYTES
CPU
REGISTERS
M68HC08 CPU
PTA
PTC
DDRD
DDRC
PTD
PTE
DDRE
Freescale Semiconductor, Inc...
Freescale Semiconductor, Inc.
HC908JB16AD/D
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc...
HC908JB16AD/D
MC68HC908JB12
$0000
↓
$007F
I/O Registers
128 Bytes
$0080
↓
$01FF
RAM
384 Bytes
$0200
↓
$C9FF
Unimplemented
51,200 Bytes
$CA00
↓
$F9FF
FLASH Memory
12,288 Bytes
$FA00
↓
$FDFF
Monitor ROM 1
1,024 Bytes
$FE00
SIM Break Status Register (SBSR)
$FE01
SIM Reset Status Register (SRSR)
$FE02
Reserved
$FE03
SIM Break Flag Control Register (SBFCR)
$FE04
Interrupt Status Register 1 (INT1)
$FE05
Interrupt Status Register 2 (INT2)
$FE06
Reserved
$FE07
Reserved
$FE08
FLASH Control Register (FLCR)
$FE09
FLASH Block Protect Register (FLBPR)
$FE0A
Reserved
$FE0B
Reserved
$FE0C
Break Address Register High (BRKH)
$FE0D
Break Address Register Low (BRKL)
$FE0E
Break Status and Control Register (BRKSCR)
$FE0F
Reserved
$FE10
↓
$FFCF
Monitor ROM 2
448 Bytes
$FFD0
↓
$FFFF
FLASH Vectors
48 Bytes
Figure 4. MC68HC908JB12 Memory Map
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
Freescale Semiconductor, Inc.
HC908JB16AD/D
Pullup on PTE3/D+
and PTE4/D– Pins
On the MC68HC908JB12, control over the pullup devices on PTE3/D+ and
PTE4/D– pins are shown in Table 2.
Freescale Semiconductor, Inc...
Table 2. Pullup Control on PTE3/D+ and PTE4/D– Pins
PULLEN
($001A)
USBEN
($0038)
PTExP
($001D)
PTE4IE
($001C)
PTE3/D+ pin
PTE4/D– pin
0
0
0
0
—
—
0
0
1
0
5kΩ pullup to VDD
5kΩ pullup to VDD (1)
0
0
0
1
—
5kΩ pullup to VDD (1)
0
0
1
1
5kΩ pullup to VDD
5kΩ pullup to VDD (1)
0
1
X
X
—
—
1
1
X
X
—
1.5kΩ pullup to VREG
1
0
X
0
—
1.5kΩ pullup to VREG
1
0
X
1
Do not set this configuration.
Notes:
1. External interrupt function is also enabled on PTE4/D– pin.
Electrical
Specifications
Electrical specifications for the MC68HC908JB16 apply to the
MC68HC908JB12, except for the USB reset timing:
Signaling Levels
Bus State
Reset
Order Numbers
Transmit
Receive
D+ and D– < VIL (max) for ≥ 8µs (MC68HC908JB16)
D+ and D– < VIL (max) for ≥ 125µs (MC68HC908JB12)
NA
These are MC order numbers for MC68HC908JB12.
Table 3. MC68HC908JB12 Order Numbers
Package
Operating
Temperature Range
MC68HC908JB12JDW
20-pin SOIC
0 °C to +70 °C
MC68HC908JB12DW
28-pin SOIC
0 °C to +70 °C
MC Order Number
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
Freescale Semiconductor, Inc.
HC908JB16AD/D
MC68HC08JB16
MC68HC08JB16
This section introduces the MC68HC08JB16, the ROM part equivalent to the
MC68HC908JB16. The entire MC68HC908JB16 data book applies to this
ROM device, with exceptions outlined below.
Table 4. Summary of MC68HC08JB16 and MC68HC908JB16 Differences
Freescale Semiconductor, Inc...
MC68HC08JB16
MC68HC908JB16
Memory ($BA00–$F9FF)
16,384 bytes ROM
16,384 bytes FLASH
User vectors ($FFD0–$FFFF)
48 bytes ROM
48 bytes FLASH
Registers at $FE08 and $FE09
Not used;
locations are reserved
FLASH related registers.
$FE08 — FLCR
$FE09 — FLBPR
Monitor ROM 1 ($FA00–$FDFF)
Unimplemented
Monitor ROM 2 ($FE10–$FFCF)
Used for testing purposes only.
Used for testing and FLASH
programming/erasing.
Dual Clock Generator Module
Currently not available.
Available in 32-pin LQFP only.
Available Packages(1)
32-pin LQFP currently not available.
28-pin SOIC
20-pin SOIC
32-pin LQFP
28-pin SOIC
20-pin SOIC
Notes:
1. The pin assignments are identical for both devices; see data sheet.
MCU Block Diagram
Figure 5 shows the block diagram of the MC68HC08JB16.
Memory Map
Figure 6 shows the memory map of the MC68HC08JB16.
Reserved Registers
The two registers at $FE08 and $FF09 are reserved locations on the
MC68HC08JB16.
On the MC68HC908JB16, these two locations are the FLASH control register
and the FLASH block protect register respectively.
Monitor ROM
The monitor program (monitor ROM, $FE10–$FFCF) on the MC68HC08JB16
is for device testing only.
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
RST
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
(5)
VDDA
VSSA0
(5) V
SSA1
(5)
VREGA0 (3.3V)
(5)
VREGA1 (3.3V)
(5)
VDD
VSS
VREG (3.3V)
(3) IRQ
(2)
CGMXFC1
(1), (5)
CGMOUT1
(5)
CGMXFC2
(1), (5)
CGMOUT2
(5)
OSC1
(1)
OSC2
(1)
ARITHMETIC/LOGIC
UNIT (ALU)
LS USB
TRANSCEIVER
Shaded blocks indicate differences to MC68HC908JB16
(1) Pins have 3V logic.
(2) Pins have integrated pullup device.
(3) Pins have software configurable pull-up device.
(4) Pins are open-drain when configured as output.
(5) Pins available on 32-pin package only.
(6) Pins available on 28-pin package only.
USB ENDPOINT 0, 1, 2
USB MODULE
2-CHANNEL TIMER INTERFACE
MODULE 2
2-CHANNEL TIMER INTERFACE
MODULE 1
COMPUTER OPERATING
PROPERLY MODULE
POWER-ON RESET
MODULE
LOW VOLTAGE INHIBIT
MODULE
SERIAL COMMUNICATIONS
INTERFACE MODULE
BREAK
MODULE
KEYBOARD INTERRUPT
MODULE
INTERNAL BUS
Figure 5. MC68HC08JB16 Block Diagram
POWER AND INTERNAL
VOLTAGE REGULATORS
IRQ
MODULE
SYSTEM INTEGRATION
MODULE
DUAL CLOCK
GENERATOR MODULE
OSCILLATOR
USER ROM VECTORS — 48 BYTES
MONITOR ROM — 448 BYTES
USER RAM — 384 BYTES
USER ROM — 16,384 BYTES
CONTROL AND STATUS REGISTERS — 128 BYTES
CPU
REGISTERS
M68HC08 CPU
DDRD
DDRA
DDRE
PTA
PTC
DDRC
PTD
PTE
Freescale Semiconductor, Inc...
(3)
(3), (4)
PTE0/TCLK (3)
PTE1/T1CH01 (3)
PTE2/T2CH01 (3)
PTE3/D+
PTE4/D– (3), (4)
PTD0 (4)
PTD1 (4), (6)
PTD2 (4), (6)
PTD3 (4), (6)
PTD4 (4), (6)
PTD5 (4), (6)
PTC0/TxD (3)
PTC1/RxD (3)
PTA7/KBA7
:
PTA0/KBA0
Freescale Semiconductor, Inc.
HC908JB16AD/D
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc...
HC908JB16AD/D
MC68HC08JB16
$0000
↓
$007F
I/O Registers
128 Bytes
$0080
↓
$01FF
RAM
384 Bytes
$0200
↓
$B9FF
Unimplemented
47,104 Bytes
$BA00
↓
$F9FF
ROM
16,384 Bytes
$FA00
↓
$FDFF
Unimplemented
1,024 Bytes
$FE00
SIM Break Status Register (SBSR)
$FE01
SIM Reset Status Register (SRSR)
$FE02
Reserved
$FE03
SIM Break Flag Control Register (SBFCR)
$FE04
Interrupt Status Register 1 (INT1)
$FE05
Interrupt Status Register 2 (INT2)
$FE06
Reserved
$FE07
Reserved
$FE08
Reserved
$FE09
Reserved
$FE0A
Reserved
$FE0B
Reserved
$FE0C
Break Address Register High (BRKH)
$FE0D
Break Address Register Low (BRKL)
$FE0E
Break Status and Control Register (BRKSCR)
$FE0F
Reserved
$FE10
↓
$FFCF
Monitor ROM
448 Bytes
$FFD0
↓
$FFFF
ROM Vectors
48 Bytes
Figure 6. MC68HC08JB16 Memory Map
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc...
HC908JB16AD/D
Electrical
Specifications
Electrical specifications for the MC68HC908JB16 apply to the
MC68HC08JB16, except for the following:
FLASH Memory
Characteristics
The FLASH memory electrical characteristics do not apply to the
MC68HC08JB16 ROM device.
ROM MC Order
Numbers
These part numbers are generic numbers only. To place an order, ROM code
must be submitted to the ROM Processing Center (RPC).
Table 5. ROM MC Order Numbers
Package
Operating
Temperature Range
MC68HC08JB16JDW
20-pin SOIC
0 °C to +70 °C
MC68HC08JB16DW
28-pin SOIC
0 °C to +70 °C
MC Order Number
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
Freescale Semiconductor, Inc.
HC908JB16AD/D
NOTES
Freescale Semiconductor, Inc...
NOTES
Addendum to MC68HC908JB16 Technical Data
For More Information On This Product,
Go to: www.freescale.com
Freescale Semiconductor, Inc...
Freescale Semiconductor, Inc.
Home Page:
www.freescale.com
email:
[email protected]
USA/Europe or Locations Not Listed:
Freescale Semiconductor
Technical Information Center, CH370
1300 N. Alma School Road
Chandler, Arizona 85224
(800) 521-6274
480-768-2130
[email protected]
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
[email protected]
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku
Tokyo 153-0064, Japan
0120 191014
+81 2666 8080
[email protected]
Asia/Pacific:
Freescale Semiconductor Hong Kong Ltd.
Technical Information Center
2 Dai King Street
Tai Po Industrial Estate,
Tai Po, N.T., Hong Kong
+800 2666 8080
[email protected]
For Literature Requests Only:
Freescale Semiconductor
Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
(800) 441-2447
303-675-2140
Fax: 303-675-2150
LDCForFreescaleSemiconductor
@hibbertgroup.com
RoHS-compliant and/or Pb- free versions of Freescale products have the functionality
and electrical characteristics of their non-RoHS-compliant and/or non-Pb- free
counterparts. For further information, see http://www.freescale.com or contact your
Freescale sales representative.
For information on Freescale.s Environmental Products program, go to
http://www.freescale.com/epp.
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters which may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
under its patent rights nor the rights of others. Freescale Semiconductor products are
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
HC908JB16AD/D
Rev. 1
8/2003
For More Information On This Product,
Go to: www.freescale.com
Similar pages