UTC MCR101-8-AD-T92-B Fh lw sensitive gate silicon controlled rectifiers reverse blocking thyristor Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MCR101
SCR
FH LW SENSITIVE GATE
SILICON CONTROLLED
RECTIFIERS REVERSE
BLOCKING THYRISTORS
1
DESCRIPTION
PNPN devices designed for high volume, line-powered consumer
applications such as relay and lamp drivers, small motor controls,
gate drivers for larger thyristors, and sensing and detection circuits.
Supplied in an inexpensive plastic TO-92 package which is readily
adaptable for use in automatic insertion equipment.
TO-92
FEATURES
*Sensitive gate allows triggering by micro controllers and other logic
circuits
*Blocking voltage to 600V
*On-state current rating of 0.8A RMS at 80°C
*High surge current capability – 10A
*Minimum and maximum values of IGT, VGT and IH specified for
ease of design
*Immunity to dV/dt – 20V/µsec minimum at 110°C
*Glass-passivated surface for reliability and uniformity
*Pb-free plating product number: MCR101L
ORDERING INFORMATION
Order Number
Normal
Lead Free Plating
MCR101-x-xx-T92-B
MCR101L-x-xx-T92-B
MCR101-x-xx-T92-K
MCR101L-x-xx-T92-K
Package
TO-92
TO-92
Pin Assignment
1
2
3
G
A
C
G
A
C
Packing
Tape Box
Bulk
Note: Pin Assignment: G: Gate A: Anode C: Cathode
MCR101L-x-xx-T92-B
(1)Packing Type
(1) B: Tape Reel, K: Bulk
(2)Package Type
(2) T92: TO-92
(3)Rank
(3) xx: refer to Classification of I GT
(4)Peak Voltage
(4) -4: 200V, -6: 400V, -8: 600V
(5)Lead Plating
(5) L: Lead Free Plating, Blank: Pb/Sn
www.unisonic.com.tw
Copyright © 2005 Unisonic Technologies Co., Ltd
1 of 5
QW-R301-009,C
MCR101
SCR
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Peak Repetitive Off-State Voltage(note)
(TJ=-40 to 110°C, Sine Wave, 50 to 60Hz; Gate
Open)
SYMBOL
RATINGS
UNIT
MCR101-4
200
V
MCR101-6 VDRM,VRRM
400
MCR101-8
600
On-Sate RMS Current (Tc=80°C) 180° Condition Angles
IT(RMS)
0.8
A
Peak Non-Repetitive Surge Current
ITSM
10
A
(1/2 cycle, Sine Wave, 60Hz, TJ=25°C)
Circuit Fusing Considerations (t=8.3 ms)
I2t
0.415
A2s
Forward Peak Gate Power (TA=25°C, Pulse Width ≤1.0µs)
PGM
0.1
W
Forward Average Gate Power (TA=25°C, t=8.3ms)
PG(AV)
0.1
W
Peak Gate Current – Forward (TA=25°C, Pulse Width≤1.0µs)
IGM
1
A
Peak Gate Voltage – Reverse (TA=25°C, Pulse Width≤1.0µs)
VGRM
5
V
Operating Junction Temperature @ Rated VRRM and VDRM
TJ
-40 ~ +110
°C
Storage Temperature
TSTG
-40 ~ +150
°C
Note: VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate
voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode.
Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the
devices are exceeded.
THERMAL DATA
PARAMETER
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
SYMBOL
θJC
θJA
RATING
75
200
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise stated)
PARAMETER
SYMBOL
TEST CONDITIONS
OFF CHARACTERISTICS
Peak Forward or Reverse
Tc=25°C
IDRM, IRRM VD=Rated VDRM and VRRM; RGK=1kΩ
Blocking Current
Tc=125°C
ON CHARACTERISTICS
Peak Forward On-State Voltage (Note1)
VTM
ITM=1A Peak @ TA=25°C
Gate Trigger Current (Continuous
IGT
VAK=7Vdc, RL=100Ω, TC=25°C
dc)(note2)
Tc=25 °C
Holding Current (note 3)
IH
VAK=7Vdc, initiating current=20mA
Tc=-40 °C
Tc=25°C
Latch Current
IL
VAK=7V, Ig=200µA
Tc=-40 °C
Gate Trigger Current
Tc=25 °C
VGT
VAK=7Vdc, RL=100Ω
(continuous dc) (Note 2)
Tc=-40 °C
DYNAMIC CHARACTERISTICS
VD=Rated VDRM, Exponential
Critical Rate of Rise of Off-State Voltage
dV/dt
Waveform, RGK=1000Ω, TJ=110°C
IPK=20A, Pw=10µsec
Critical Rate of Rise of On-State Current
di/dt
diG/dt=1A/µsec, Igt=20mA
Notes: 1. Indicates Pulse Test Width≤1.0ms, duty cycle ≤1%
2. RGK=1000Ω included in measurement.
3. Does not include RGK in measurement.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP MAX UNIT
10
100
µA
1.7
V
40
200
µA
0.5
5
10
10
15
0.8
1.2
0.6
0.62
20
35
mA
mA
V
V/µs
50
A/µs
2 of 5
QW-R301-009,C
MCR101
SCR
VOLTAGE CURRENT CHARACTERISTIC OF SCR
SYMBOL
VDRM
IDRM
VRRM
IRRM
VTM
IH
PARAMETER
Peak Repetitive Off Stat Forward Voltage
Peak Forward Blocking Current
Peak Repetitive Off State Reverse Voltage
Peak Reverse Blocking Current
Peak On State Voltage
Holding Current
+ Current
Anode +
VTM
on state
IH
IRRM at VRRM
+ Voltage
Reverse Blocking Region
(off state )
Reverse Avalanche Region
Anode -
IDRM at VDRM
Forward Blocking Region
(off state )
CLASSIFICATION OF IGT
RANK
RANGE
B
48~105µA
C
95~200µA
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
AA
8~16µA
AB
14~21µA
AC
19~25µA
AD
23~52µA
3 of 5
QW-R301-009,C
MCR101
SCR
TYPICAL CHARACTERISTICS
Figure 1. Typical Gate Trigger Current
versus Junction Temperature
Figure 2. Typical Gate Trigger Voltage
versus Junction Temperature
0.9
Gate Trigger Voltage (Volts)
1.0
90
Gate Trigger Current (μA)
100
80
70
60
50
40
30
20
10
-40 -25 -10 5 20 25 50 65 80 95 110
Junction Temperature, TJ (℃)
0.8
0.7
0.6
0.5
0.4
0.3
0.2
-40 -25 -10 5 20 25 50 65 80 95 110
Junction Temperature, TJ (℃)
Figure 3. Typical Holding Current
versus Junction Temperature
Figure 4. Typical Latching Current
versus Junction Temperature
1000
Latching Current (μA)
Holding Current (μA)
1000
100
10
-40 -25 -10 5
20 25 50 65 80 95 110
100
10
-40 -25 -10 5
Junction Temperature, TJ (℃)
Figure 6. Typical On-State Characterstics
120
Maximum Allowable Case
Temperature, TC (℃)
110
100
DC
80
180°
70
60
50
40
30°
0
0.1
0.2
60°
0.3
90°
120°
0.4
0.5
RMS On-State Current, ITRMS (AMPS)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
Instantaneous On-State Current, IT
(AMPS)
Figure 5. Typical RMS Current Derating
90
20 25 50 65 80 95 110
Junction Temperature, TJ (℃)
10
MAXIMUM @ T J = 25 ℃
MAXIMUM @ T J = 110℃
1
0.1
0.2 0.8 1.1 1.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5
Instantaneous On-State Voltage, VT (Volts)
4 of 5
QW-R301-009,C
MCR101
SCR
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R301-009,C
Similar pages