Hirose MDF6-18DS-3.5C 3.5mm pitch miniature double row connector for secondary power (product compliant to ul/csa standard) Datasheet

3.5mm Pitch Miniature Double Row Connector for Secondary Power (Product Compliant to UL/CSA Standard)
MDF6 Series
■Features
1. Pitch 3.5mm Miniature Type
This is a space saving miniature connector where the adjacent
contact pitch is set to 3.5mm and the opposite length is set to
5mm double-row alignment.
Inner type full lock
2. Current Capacity Secures 7A
Despite miniature power connector, the current capacity 7A is
secured using the AWG No.16 cable.
3. Box Type Header
The box type header secures scoop-proof insertion, and perfectly
prevents mis-insertion.
4. Inner Type Full Lock Adopted
Adopting the inner type full lock which the locking area is not
exposed to the outside, the connector can be engaged under the
high reliable and stable conditions.
■Applications
Secondary power units for various equipment
Mis-insertion protector
B111
■Product Specifications
Current rating
(Note1)
Rating
Cable Size
AWG#16 : 7A
Operating Temperature Range
-30 to +85ç (Note2)
AWG#18 : 6A
Operating Moisture Range
-40 to 80%
Storage Temperature Range
-10 to +60ç (Note3)
Storage Moisture Range
-40 to 70% (Note3)
AWG#20 : 5A
AWG#22 : 4A
Voltage rating
300V AC
Standard Value Applicant to the UL CSA Safety Standard
Current rating
Rating
AWG#16 to #18 : 6A
Cable Size
■UL CSA Safety Standard File No.
UL
:E52653
CSA
:LR95109
AWG#20 to #22 : 4A
Voltage rating
30V AC
Item
Specification
Condition
1. Insulation Resistance
1000M ohms min
500V DC
2. Withstanding voltage
No flashover or insulation breakdown.
1500V AC/1 minute
3. Contact Resistance
30m ohms max
100mA
4. Single Insertor/Extraction Force 0.4N(40gf) min., 4.9N(500gf) max.
Measured at the steel pin with 1.52∞0.76±0.002mm
5. Vibration
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
No electrical discontinuity of 1µs or more
6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 500M ohms min.
7. Temperature Cycle
Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min.
8. Durability (Mating/un-mating) Contact resistance: 30m ohms
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes ➝ 5 to 35ç: 10 minutes
(-85ç: 30 minutes ➝ 5 to 35ç: 10 minutes) 5 cycles
30 cycles
9. Resistance to Soldering heat No deformation of components affecting performance.
Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: The rated current will be changed according to applicable cable sizes. The header rating only is 7A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Product
Part
Crimping Socket
Crimping Contact for Socket
Pin Header
Material
Treatment
Remarks
Insulator
Polyamide resin
White (Natural)
UL94V-0
Contact
Phosphor copper
Tin plated
–––––
Insulator
Polyamide resin
White (Natural)
UL94V-0
Contact
Brass
Tin plated
–––––
■Ordering Information
●Connector
●Contact
MDF6
- * DS - 3.5 C
q
q Series Name
w
: MDF 6
w Number of Contacts : 4 to 20
e Connector Type
B112
e
r
r Contact Pitch
t
: 3.5mm
t Contact type
C
MDF6 - 1618 - SCF
: Crimping socket
DS : Double row socket
DSA: Straight dip
DP : Double row pin header
DS : Right angle dip
q
q Applicable Cable Size
w
w Packaging Type
1618 : AWG#16 to #18
SCF : Socket Contact, Reel
2022 : AWG#20 to #22
SC : Socket Contact, Bag
■Double Row Socket
Photo: Connected State
Unit: mm
Part Number
CL No.
Number of Contacts A
B
C
MDF6- 4DS-3.5C
547-0074-1
4
10.5
8.1
3.5
MDF6- 6DS-3.5C
547-0075-4
6
14.0 11.6
7.0
MDF6- 8DS-3.5C
547-0076-7
8
17.5 15.1 10.5
MDF6-10DS-3.5C
547-0077-0
10
21.0 18.6 14.0
MDF6-12DS-3.5C
547-0078-2
12
24.5 22.1 17.5
MDF6-14DS-3.5C
547-0079-5
14
28.0 25.6 21.0
MDF6-16DS-3.5C
547-0080-4
16
31.5 29.1 24.5
MDF6-18DS-3.5C
547-0081-7
18
35.0 32.6 28.0
MDF6-20DS-3.5C
547-0082-0
20
38.5 36.1 31.5
Note: A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag.
■Socket Crimping contact
●Applicable Cable (Tin plating Annealed Copper Wire)
Conductor Size (Wire construction)
Jacket Diameter
AWG #16 (26cores/0.254mm)
AWG #18 (34cores/0.18 mm)
Ø2.5 to Ø2.0mm
AWG #20 (21cores/0.18 mm)
AWG #22 (17cores/0.16 mm)
Ø1.9 to Ø1.5mm
Note: If other cables are used instead of the applicable cable, please contact
Hirose sales department.
●Recommended Cable
●Strip Length
UL1061, UL1007
Part Number
CL No.
MDF6-1618SCF
MDF6-1618SC
MDF6-2022SCF
MDF6-2022SC
547-0070-0
547-0071-3
547-0072-6
547-0073-9
Applicable Cable
AWG Size
Jacket Diameter
#16 to #18
2.5 to 2.0
#20 to #22
1.9 to 1.5
2.7 to 4.4mm
Packaging Type
Quantity
Reel
Bag
Reel
Bag
5000
100
5000
100
BApplicable Crimping Tool
Type
Main press unit
Part Number
CL No.
Applicable Contact
CM105
901-0005-4
----------------AP105-MDF6-1618S
901-4512-4
MDF6-1618SCF
Applicator
AP105-MDF6-2022S
901-4513-7
MDF6-2022SCF
MDF6-TA1618HC
550-0203-5
MDF6-1618SC
Manual Crimping Tool
MDF6-TA2022HC
550-0204-8
MDF6-2022SC
Extraction Tool
DF-C-PO(A)
550-0170-8
MDF6-****SC(F)
Note: If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products.
B113
■Double Row Pin Header: Straight Type
●Board Hole Diameter : Ø1.3 +0.1
+0
●Applicable Board Thickness : 1.6±0.2
Unit: mm
Number of Contacts
A
B
MDF6- 4DP-3.5DSA 547-0083-2
4
10.5
3.5
MDF6- 6DP-3.5DSA 547-0084-5
6
14
7
MDF6- 8DP-3.5DSA 547-0085-8
8
17.5
10.5
MDF6-10DP-3.5DSA 547-0086-0
10
21
14
MDF6-12DP-3.5DSA 547-0087-3
12
24.5
17.5
MDF6-14DP-3.5DSA 547-0088-6
14
28
21
MDF6-16DP-3.5DSA 547-0089-9
16
31.5
24.5
MDF6-18DP-3.5DSA 547-0090-8
18
35
28
MDF6-20DP-3.5DSA 547-0091-0
20
38.5
31.5
Part Number
CL No.
Note1: A packaging quantity is delivered by the bag unit (100 pcs.). If needed,
please order the products per bag.
■Double Row Pin Header: Right Angle Type
●Board Hole Diameter : Ø1.3 +0.1
+0
●Applicable Board Thickness : 1.6±0.2
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
MDF6- 4DP-3.5DS
547-0270-0
4
10.5
3.5
MDF6- 6DP-3.5DS
547-0271-2
6
14
7
MDF6- 8DP-3.5DS
547-0272-5
8
17.5
10.5
MDF6-10DP-3.5DS
547-0273-8
10
21
14
Note1: A packaging quantity is delivered by the bag unit (100 pcs.). If needed,
please order the products per bag.
B114
BApplication Pattern
BPrecautions
1. Recommended Soldering Condition
Flow: 250ç for 3 seconds
Manual soldering: 290ç for 2 seconds
2. Cleaning Condition
Refer to the "Nylon Connector Use Hand book".
3. Connection Condition
Refer to the "Nylon Connector Use Hand book".
4. Cautions
■The color phase of this product is slightly different from that of the formed product according to
the manufacturing lot and future storage conditions, but the difference doesn't affect the
performance.
B115
Similar pages