Hirose MDF7-19P-2.54DSA 2.54mm pitch bottom entry type connector Datasheet

2.54mm Pitch Bottom Entry Type Connector
MDF7 Series
■Features
Board to Board size Freely settable
1. Board to Board Size Freely Settable
The board to board size can be set at infinite stages, according to the
header pin through type structure and the diverse header variation.
The board to board size can be set at infinite stages.
2. Integrity of Parts Mounted Surface
The parts mounted surface on two boards aren't face each other, and can
be oriented in the same direction.
3. Wide Variation
Single-row product, double-row product, tin plated and gold plated
products are lined up. In addition, the header to correspond to the board
to board size are prepared. Concerning board to board size, other
products can be provided, in addition to products in this catalog. Please
contact HRS company as required.
■Applications
Internal connection of telephone sets and OA/FA equipment, connection
between IPM, IGBT and the board.
A247
■Product Specifications
Rating
Current rating: 3A
Operating Temperature Range: -30ç to +85ç(Note 1)
Voltage rating: 250V AC Operating Humidity Range: 40% to 70%
Item
Storage Temperature Range: -10ç to +60ç (Note 2)
Storage Humidity Range: 40% to 70%(Note 2)
Specification
Condition
1. Insulation Resistance
1000M ohms min.
500V DC
2. Withstanding voltage
No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance
30m ohms max.
100mA
4. Single Insertion/Extraction Force MIN 0.4N(40gf), MAX 4.4N(450gf)
5. Vibration
6. Humidity (Steady state)
7. Temperature Cycle
8. Durability
(Mating/un-mating)
Measured by the square steel pin with 0.635±0.002mm
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
Contact resistance: 30m ohms max.
96 hours at temperature of
Insulation resistance: 500M ohms min.
40ç and humidity of 90% to 95%
Contact resistance: 30m ohms max.
(-55ç: 30 minutes, 5 to 35ç: 10 minutes
Insulation resistance: 1000M ohms min.
(-85ç: 30 minutes, 5 to 35ç: 10 minutes) 5cycles
Contact resistance: 30m ohms max.
9. Resistance to Soldering heat No deformation of components affecting performance.
Tin plating
: 30 cycles
Gold plating
: 50 cycles
Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
■Material
Product
Receptacle
Pin Header
Part
Material
Insulator
Polyamide
Contact
Phosphor bronze
Insulator
PBT
Contact
Brass
Finish
Remarks
Black
UL94V-0
Tin plated or gold plated
–––––––
Main unit: Black/Locator: Gray
UL94V-0
Tin plated or gold plated
–––––––
■Ordering Information
MDF7
- * S - 2.54 DSA
q
q Series Name
w
: MDF7
w Number of contacts : 3 to 46
e Connector Type
S : Single row receptacle
D : Double row receptacle
P : Single row pin header
DP: Double row pin header
A248
e
r
t
r Contact Pitch
: 2.54mm
t Contact type
DSA: Straight through hole
DS : Right Angle through hole
■Single Row Receptacle
[Specific No.] –* *, (* *)
Blank :Tin plated
(01)
:Gold plated
Number of Contacts
Part Number
CL No.
A
B
7.62 5.08
3
MDF7- 3S-2.54DSA(**) 547-0355-0-**
12.7 10.16
5
MDF7- 5S-2.54DSA(**) 547-0112-9-**
15.24 12.7
6
MDF7- 6S-2.54DSA(**) 547-0129-1-**
17.78 15.24
7
MDF7- 7S-2.54DSA(**) 547-0135-4-**
20.32 17.78
8
MDF7- 8S-2.54DSA(**) 547-0136-7-**
22.86 20.32
9
MDF7- 9S-2.54DSA(**) 547-0137-0-**
25.4 22.86
10
MDF7-10S-2.54DSA(**) 547-0038-8-**
27.94 25.4
11
MDF7-11S-2.54DSA(**) 547-0138-2-**
30.48 27.94
12
MDF7-12S-2.54DSA(**) 547-0040-0-**
33.02 30.48
13
MDF7-13S-2.54DSA(**) 547-0139-5-**
35.56 33.02
14
MDF7-14S-2.54DSA(**) 547-0140-4-**
Note: The quantity for delivery is determined per pack (100 pcs.). If
Part Number
CL No.
MDF7-15S-2.54DSA(**) 547-0012-4-**
MDF7-16S-2.54DSA(**) 547-0141-7-**
MDF7-17S-2.54DSA(**) 547-0142-0-**
MDF7-18S-2.54DSA(**) 547-0013-7-**
MDF7-19S-2.54DSA(**) 547-0143-2-**
MDF7-20S-2.54DSA(**) 547-0051-6-**
MDF7-21S-2.54DSA(**) 547-0144-5-**
MDF7-22S-2.54DSA(**) 547-0145-8-**
MDF7-23S-2.54DSA(**) 547-0146-0-**
MDF7-24S-2.54DSA(**) 547-0147-3-**
MDF7-25S-2.54DSA(**) 547-0014-0-**
needed, please order the products
Unit: mm
Number of Contacts
A
B
38.1 35.56
15
40.64 38.1
16
43.18 40.64
17
45.72 43.18
18
48.26 45.72
19
50.8 48.26
20
53.34 50.8
21
55.88 53.34
22
58.42 55.88
23
60.96 58.42
24
63.5 60.96
25
per pack.
■Double Row Receptacle
Unit: mm
Number of Contacts
Part Number
CL No.
A
B
[Specific No.] –* *, (* *) (Note 2)
15.24 12.7
12
MDF7-12D-2.54DSA(**) 547-0032-1-**
Blank :Gold plated
(01)
:Tin plated
17.78 15.24
14
MDF7-14D-2.54DSA(**) 547-0354-8-**
20.32 17.78
16
MDF7-16D-2.54DSA(**) 547-0363-9-**
25.4 22.86
20
MDF7-20D-2.54DSA(**) 547-0033-4-**
27.94 25.4
22
MDF7-22D-2.54DSA(**) 547-0246-5-**
30.48 27.94
24
MDF7-24D-2.54DSA(**) 547-0244-0-**
33.02 30.48
26
MDF7-26D-2.54DSA(**) 547-0247-8-**
38.1 35.56
30
MDF7-30D-2.54DSA(**) 547-0016-5-**
43.18 40.64
34
MDF7-34D-2.54DSA(**) 547-0227-0-**
50.8 48.26
40
MDF7-40D-2.54DSA(**) 547-0228-3-**
58.42 55.88
46
MDF7-46D-2.54DSA(**) 547-0229-6-**
Note 1: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
Note 2: The MDF7 series 2-row plating specification is different from the single-row plating specification.
No-specification indicates the gold plating, and (01) indicates the tin plating.
A249
■Single Row Straight Pin Header
[Specific No.] –* *, (* *)
Blank :Tin plated
(01)
:Gold plated
●Board Through-hole Diameter: Ø1.0++0.1
0
[without locator]
●MDF7(Board to Board Size: 2.54 to 5.5mm)
Number of Contacts
A
MDF7- 3P-2.54DSA(**) 547-0220-1-**
3
MDF7- 5P-2.54DSA(**) 547-0113-1-**
5
MDF7- 6P-2.54DSA(**) 547-0130-0-**
MDF7- 7P-2.54DSA(**) 547-0148-6-**
[with locator]
●MDF7B (Board to Board Size 2.54 to 12mm)
Number of Contacts
A
MDF7B- 3P-2.54DSA(**) 547-0304-0-**
3
MDF7B- 5P-2.54DSA(**) 547-0133-9-**
5
10
MDF7B- 6P-2.54DSA(**) 547-0131-3-**
10
MDF7B- 7P-2.54DSA(**) 547-0177-4-**
20.32 17.78
10
22.86 20.32
10
10
25.4
22.86
11
27.94
25.4
MDF7-12P-2.54DSA(**) 547-0043-8-**
12
MDF7-13P-2.54DSA(**) 547-0152-3-**
13
MDF7-14P-2.54DSA(**) 547-0153-6-**
14
MDF7-15P-2.54DSA(**) 547-0018-0-**
MDF7-16P-2.54DSA(**) 547-0111-6-**
Part Number
CL No.
B
C
7.62
5.08
10
12.7
10.16
10
6
15.24
12.7
7
17.78 15.24
MDF7- 8P-2.54DSA(**) 547-0149-9-**
8
MDF7- 9P-2.54DSA(**) 547-0150-8-**
9
MDF7-10P-2.54DSA(**) 547-0039-0-**
MDF7-11P-2.54DSA(**) 547-0151-0-**
Part Number
CL No.
C
7.62
5.08
16.46
12.7
10.16 16.46
6
15.24
12.7
7
17.78 15.24 16.46
MDF7B- 8P-2.54DSA(**) 547-0178-7-**
8
20.32 17.78 16.46
MDF7B- 9P-2.54DSA(**) 547-0179-0-**
9
22.86 20.32 16.46
10
MDF7B-10P-2.54DSA(**) 547-0048-1-**
10
25.4
22.86 16.46
10
MDF7B-11P-2.54DSA(**) 547-0047-9-**
11
27.94
25.4
30.48 27.94
10
MDF7B-12P-2.54DSA(**) 547-0041-2-**
12
30.48 27.94 16.46
33.02 30.48
10
MDF7B-13P-2.54DSA(**) 547-0180-9-**
13
33.02 30.48 16.46
35.56 33.02
10
MDF7B-14P-2.54DSA(**) 547-0181-1-**
14
35.56 33.02 16.46
15
38.1
35.56
10
MDF7B-15P-2.54DSA(**) 547-0024-3-**
15
38.1
35.56 16.46
16
40.64
38.1
10
MDF7B-16P-2.54DSA(**) 547-0182-4-**
16
40.64
38.1
16.46
16.46
16.46
NDF7-17P-2.54DSA(**) 547-0154-9-**
17
43.18 40.64
10
MDF7B-17P-2.54DSA(**) 547-0183-7-**
17
43.18 40.64 16.46
MDF7-18P-2.54DSA(**) 547-0022-8-**
18
45.72 43.18
10
MSD7B-18P-2.54DSA(**) 547-0025-6-**
18
45.72 43.18 16.46
MDF7-19P-2.54DSA(**) 547-0155-1-**
19
48.26 45.72
10
MDF7B-19P-2.54DSA(**) 547-0184-0-**
19
48.26 45.72 16.46
MDF7-20P-2.54DSA(**) 547-0123-5-**
20
50.8
48.26
10
MDF7B-20P-2.54DSA(**) 547-0052-9-**
20
50.8
48.26 16.46
MDF7-21P-2.54DSA(**) 547-0156-4-**
21
53.34
50.8
10
MDF7B-21P-2.54DSA(**) 547-0185-2-**
21
53.34
50.8
MDF7-22P-2.54DSA(**) 547-0157-7-**
22
55.88 53.34
10
MDF7B-22P-2.54DSA(**) 547-0186-5-**
22
55.88 53.34 16.46
MDF7-23P-2.54DSA(**) 547-0158-0-**
23
58.42 55.88
10
MDF7B-23P-2.54DSA(**) 547-0066-3-**
23
58.42 55.88 16.46
MDF7-24P-2.54DSA(**) 547-0159-2-**
24
60.96 58.42
10
MDF7B-24P-2.54DSA(**) 547-0067-6-**
24
60.96 58.42 16.46
MDF7-25P-2.54DSA(**) 547-0023-0-**
25
63.5
10
MDF7B-25P-2.54DSA(**) 547-0026-9-**
25
63.5
60.96
Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used.
Note 2: The quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
A250
Unit: mm
B
16.46
60.96 16.46
●MDF7P (Board to Board Size 2.54 to 8mm)
●MDF7C (Board to Board Size 5.08 to 15mm,with Locator)
Unit: mm
Part Number
CL No.
Number of Contacts
MDF7P- 3P-2.54DSA(**)
–––––––
3
MDF7P- 5P-2.54DSA(**)
–––––––
5
12.7
MDF7P- 6P-2.54DSA(**)
–––––––
6
15.24 12.7
MDF7P- 7P-2.54DSA(**)
–––––––
7
MDF7P- 8P-2.54DSA(**)
–––––––
MDF7P- 9P-2.54DSA(**)
–––––––
Unit: mm
C
Part Number
CL No.
Number of Contacts
5.08
12.5
MDF7C- 3P-2.54DSA(**)
–––––––
3
10.16
12.5
MDF7C- 5P-2.54DSA(**) 547-0344-4-**
5
12.7
12.5
MDF7C- 6P-2.54DSA(**) 547-0268-8-**
6
15.24 12.7
17.78 15.24
12.5
MDF7C- 7P-2.54DSA(**) 547-0378-6-**
7
17.78 15.24 19.46
8
20.32 17.78
12.5
MDF7C- 8P-2.54DSA(**) 547-0375-8-**
8
20.32 17.78 19.46
9
22.86 20.32
12.5
MDF7C- 9P-2.54DSA(**)
–––––––
9
22.86 20.32 19.46
10
25.4
12.5
MDF7C-10P-2.54DSA(**)
–––––––
10
25.4
11
27.94 25.4
12.5
MDF7C-11P-2.54DSA(**) 547-0376-0-**
11
27.97 25.4
12
30.48 27.94
12.5
MDF7C-12P-2.54DSA(**)
12
30.48 27.94 19.46
13
33.02 30.48
12.5
MDF7C-13P-2.54DSA(**) 547-0401-6-**
13
33.02 30.48 19.46
MDF7P-14P-2.54DSA(**) 547-0385-1-**
14
35.56 33.02
12.5
MDF7C-14P-2.54DSA(**) 547-0380-8-**
14
35.56 33.02 19.46
MDF7P-15P-2.54DSA(**) 547-0230-5-**
15
38.1
12.5
MDF7C-15P-2.54DSA(**)
–––––––
15
38.1
MDF7P-16P-2.54DSA(**) 547-0346-0-**
MDF7P-10P-2.54DSA(**) 547-0360-0-**
MDF7P-11P-2.54DSA(**)
–––––––
MDF7P-12P-2.54DSA(**) 547-0345-7-**
MDF7P-13P-2.54DSA(**)
–––––––
A
7.62
B
22.86
35.56
–––––––
A
7.62
B
C
5.08 19.46
10.16 19.46
19.46
22.86 19.46
19.46
35.56 19.46
16
40.64 38.1
12.5
MDF7C-16P-2.54DSA(**)
–––––––
16
40.64 38.1
MDF7P-17P-2.54DSA(**)
–––––––
17
43.18 40.46
12.5
MDF7C-17P-2.54DSA(**)
–––––––
17
43.18 40.64 19.46
MDF7P-18P-2.54DSA(**)
–––––––
18
45.72 43.18
12.5
MDF7C-18P-2.54DSA(**) 547-0029-7-**
18
45.72 43.18 19.46
MDF7P-19P-2.54DSA(**) 547-0347-2-**
19.46
19
48.26 45.72
12.5
MDF7C-19P-2.54DSA(**) 547-0361-3-**
19
48.26 45.72 19.46
MDF7P-20P-2.54DSA(**)
–––––––
20
50.8
12.5
MDF7C-20P-2.54DSA(**) 547-0198-4-**
20
50.8
MDF7P-21P-2.54DSA(**)
–––––––
21
53.34 50.8
12.5
MDF7C-21P-2.54DSA(**)
–––––––
21
53.34 50.8
MDF7P-22P-2.54DSA(**)
–––––––
22
55.88 53.34
12.5
MDF7C-22P-2.54DSA(**)
–––––––
22
55.88 53.34 19.46
MDF7P-23P-2.54DSA(**)
–––––––
23
58.42 55.88
12.5
MDF7C-23P-2.54DSA(**)
–––––––
23
58.42 55.88 19.46
MDF7P-24P-2.54DSA(**)
–––––––
24
60.96 58.42
12.5
MDF7C-24P-2.54DSA(**)
–––––––
24
60.96 58.42 19.46
25
63.5
12.5
MDF7C-25P-2.54DSA(**) 547-0305-2-**
25
63.5
MDF7P-25P-2.54DSA(**) 547-0348-5-**
48.26
60.96
48.26 19.46
19.46
60.96 19.46
Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used.
Note 2: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
Note 3: As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-production
according to your demand. Please contact HRS company, as required.
A251
■Single-Row Right Angle Pin Header
[Specific No.] –* *, (* *)
Blank :Tin plated
(01)
:Gold plated
●Board Through-hole Diameter: Ø1.0++0.1
0
Unit: mm
Number of Contacts
A
MDF7- 5P-2.54DS(**) 547-0160-1-**
5
12.7
MDF7- 6P-2.54DS(**) 547-0161-4-**
6
15.24 12.7
MDF7- 7P-2.54DS(**) 547-0162-7-**
7
MDF7- 8P-2.54DS(**) 547-0163-0-**
8
MDF7- 9P-2.54DS(**) 547-0164-2-**
9
MDF7-10P-2.54DS(**) 547-0165-5-**
MDF7-11P-2.54DS(**) 547-0166-8-**
Part Number
CL No.
B
Part Number
CL No.
Number of Contacts
B
40.64 38.1
MDF7-17P-2.54DS(**) 547-0170-5-**
17
43.18 40.64
17.78 15.24 MDF7-18P-2.54DS(**) 547-0019-3-**
18
45.72 43.18
20.32 17.78 MDF7-19P-2.54DS(**) 547-0171-8-**
19
48.26 45.72
22.86 20.32 MD7F-20P-2.54DS(**) 547-0172-0-**
20
50.8
10
25.4
21
53.34 50.8
11
27.94 25.4
MDF7-22P-2.54DS(**) 547-0174-6-**
22
55.88 53.34
MDF7-12P-2.54DS(**) 547-0116-0-**
12
30.48 27.94 MDF7-23P-2.54DS(**) 547-0175-9-**
23
58.42 55.88
MDF7-13P-2.54DS(**) 547-0167-0-**
13
33.02 30.48 MDF7-24P-2.54DS(**) 547-0176-1-**
24
60.96 58.42
MDF7-14P-2.54DS(**) 547-0168-3-**
14
35.56 33.02 MDF7-25P-2.54DS(**) 547-0028-4-**
25
63.5
MDF7-15P-2.54DS(**) 547-0027-1-**
15
38.1
22.86 MDF7-21P-2.54DS(**) 547-0173-3-**
35.56
Note: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
BApplication Pattern and PCB mounting pattern
●When the single-row straight pin header is used
●When the header with locator is used
The locator moves as the connector is inserted.
●When the board to board size is set to MAX
To separate clearance between the boards, the operation limit t is defined as the
state where the male pin has passed through the receptacle.
A252
A
16
10.16 MDF7-16P-2.54DS(**) 547-0169-6-**
●When the right angle pin header is used
48.26
60.96
■Double-Row Straight Pin Header
[Specific No.] –* *, (* *)
Blank :Gold plated
(01)
:Tin plated
●Board Through-hole Diameter: Ø1.0++0.1
0
●MDF7 (Board to Board Size: 2.54 to 5.5mm)
Part Number
MDF7-12DP-2.54DSA(**)
MDF7-14DP-2.54DSA(**)
MDF7-16DP-2.54DSA(**)
MDF7-20DP-2.54DSA(**)
MDF7-22DP-2.54DSA(**)
MDF7-24DP-2.54DSA(**)
MDF7-26DP-2.54DSA(**)
MDF7-30DP-2.54DSA(**)
MDF7-34DP-2.54DSA(**)
MDF7-40DP-2.54DSA(**)
MDF7-46DP-2.54DSA(**)
Number of Contacts
CL No.
12
547-0034-7-**
14
547-0365-4-**
16
547-0364-1-**
20
547-0114-4-**
22
547-0093-6-**
24
547-0250-2-**
26
547-0251-5-**
30
547-0037-5-**
34
547-0252-8-**
40
547-0253-0-**
46
547-0254-3-**
A
15.24
17.78
20.32
25.4
27.94
30.48
33.02
38.1
43.18
50.8
58.42
Unit: mm
B
C
12.7
10
15.24 10
17.78 10
22.86 10
25.4
10
27.94 10
30.48 10
35.56 10
40.64 10
48.26 10
55.88 10
●MDF7P (Board to Board Size: 2.54 to 8mm)
Part Number
MDF7P-12DP-2.54DSA(**)
MDF7P-14DP-2.54DSA(**)
MDF7P-16DP-2.54DSA(**)
MDF7P-20DP-2.54DSA(**)
MDF7P-22DP-2.54DSA(**)
MDF7P-24DP-2.54DSA(**)
MDF7P-26DP-2.54DSA(**)
MDF7P-30DP-2.54DSA(**)
MDF7P-34DP-2.54DSA(**)
MDF7P-40DP-2.54DSA(**)
MDF7P-46DP-2.54DSA(**)
Number of Contacts
CL No.
12
547-0407-2-**
14
–––––––
16
547-0367-0-**
20
547-0260-6-**
22
547-0261-9-**
24
547-0262-1-**
26
547-0263-4-**
30
547-0264-7-**
34
–––––––
40
–––––––
46
–––––––
A
15.24
17.78
20.32
25.4
27.94
30.48
33.02
38.1
43.18
50.8
58.42
Unit: mm
B
C
12.7
12.5
15.24 12.5
17.78 12.5
22.86 12.5
25.4
12.5
27.94 12.5
30.48 12.5
35.56 12.5
40.64 12.5
48.26 12.5
55.88 12.5
Note 1: The board to board size in the above table represents the state where the 1.6mm thickness board is used.
Note 2: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
Note 3: The MDF7 series 2-row plating specification is different from the single-row plating specification. No-specification indicates the
gold plating, and (01) indicates the tin plating.
Note 4: As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-production
according to your demand. Please contact HRS company, as required.
BApplication Pattern and PCB mounting pattern
●When the double-row straight pin header is used
BPrecautions
1. Recommended Soldering Condition ■Flow Condition by Automatic Soldering Unit
Soldering temperature: 250±5ç, Soldering time: within 2 seconds
■Manual Soldering Condition
Soldering iron temperature: 290±10ç, Soldering time: within 2 seconds
2. Board Masking
If the automatic soldering unit is used, block the pin header through-hole on the receptacle
mounted board with the masking tape, etc., and prevent the flux pervasion.
In addition, if much flux is adhered so as to affect the contact, please be sure to clean the board.
3. Cleaning Condition
Refer to Nylon Connector Use Hand book.
4. Cautions
■It is impossible to fix the board to the board by the connector only. Please take actions
to fix the board without using the connector.
■If the board deformation could occur due to vibration, please use the gold plating.
■Don't use the connector as the top entry.
A253
Similar pages