ME701202 ME701602 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Three-Phase Diode Bridge Modules 20 Amperes/1200-1600 Volts K F K Description: Powerex Three-Phase Diode Bridge Modules are designed for use in three phase bridge applications. The modules are isolated consisting of six rectifier diodes. These ME70 Modules have been tested and recognized by Underwriters Laboratories (QQQX2 Power Switching Semiconductors). K + E H J - M L - DIA. (2 TYP.) D B A AC INPUT TERMINAL .250 TAB DC OUTPUT TERMINAL G C N ME701202, ME701602 Three-Phase Diode Bridge Modules 20 Amperes/1200-1600 Volts Features: M Isolated Mounting M Planar Chips M UL Recognized Applications: M Inverters M DC Power Supplies Outline Drawing Dimension A B Inches 3.150 2.677±0.012 M AC Motor Control Front End Millimeters 80 68±0.3 C 1.220 31 D 1.181 30 E 1.142 29 F 0.866 22 G 0.728 18.5 H 0.512 13 J 0.492 R K 0.472 L R12.5 12 Ordering Information: Select the complete eight digit module part number you desire from the table below. Example: ME701602 is a 1600 Volt, 20 Ampere ThreePhase Diode Bridge Module. Type ME70 Voltage Volts (x100) Current Rating Amperes (x10) 12 16 02 0.256±0.008 Dia. Dia. 6.5±0.2 M 0.118 3 N 0.079 2 D-53 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 ME701202, ME701602 Three-Phase Diode Bridge Modules 20 Amperes/1200-1600 Volts Absolute Maximum Ratings Characteristics Symbol Peak Reverse Blocking Voltage VRRM VRSM 1200 1600 Volts 1350 1700 Volts VR(DC) IO 960 1280 20 20 Amperes IFSM IFSM 200 200 Amperes 180 180 Amperes I2t 167 167 A2sec Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms DC Reverse Blocking Voltage DC Output Current, TC = 100°C Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) I2t (for Fusing), 8.3 milliseconds Storage Temperature Operating Temperature Maximum Mounting Torque M6 Mounting Screw Module Weight (Typical) V Isolation D-54 TSTG Tj — — VRMS ME701202 ME701602 -40 to 125 -40 to 125 -40 to 150 -40 to 150 26 Units Volts °C °C 26 in.-lb. 117 117 Grams 2500 2500 Volts Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 ME701202, ME701602 Three-Phase Diode Bridge Modules 20 Amperes/1200-1600 Volts Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions ME701202/ME701602 Units Blocking State Maximums Reverse Leakage Current, Peak IRRM Tj = 150°C, VRRM = Rated 2.0 mA Conducting State Maximums Peak On-State Voltage VFM IFM = 20A Ru(J-C) Ru(C-S) Per Module 1.0 °C/Watt Per Module 0.1 °C/Watt Thermal Maximums Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink (Lubricated) 1.25 Volts D-55 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 ME701202, ME701602 Three-Phase Diode Bridge Modules 20 Amperes/1200-1600 Volts 2.4 2.0 1.6 1.2 0.8 0.4 200 150 100 50 0 101 102 103 MAXIMUM ON-STATE POWER DISSIPATION 50 RESISTIVE INDUCTIVE LOAD 40 30 20 10 0 0 5 10 15 20 DC OUTPUT CURRENT, IO, (AMPERES) 100 101 CYCLES AT 60 HZ INSTANTANEOUS ON-STATE CURRENT, IFM, (AMPERES) MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC) 250 Tj = 25oC MAXIMUM PEAK SURGE (NON-REPETITIVE) CURRENT, IFSM, (AMPERES) INSTANTANEOUS ON-STATE VOLTAGE, VFM, (VOLTS) 2.8 100 D-56 MAXIMUM ALLOWABLE CASE TEMPERATURE MAXIMUM ALLOWABLE PEAK SURGE (NON-REPETITIVE) CURRENT MAXIMUM ON-STATE CHARACTERISTICS 25 102 160 140 120 100 80 RESISTIVE INDUCTIVE LOAD 0 0 5 10 15 20 DC OUTPUT CURRENT, IO, (AMPERES) 25