RCD MGP50P-R100-D Metal film melf resistor Datasheet

METAL FILM MELF RESISTORS
RESISTORSCAPACITORSCOILSDELAY LINES
MGP SERIES - Conformal Coated
MHM SERIES - Hermetic Sealed
Industry’s widest selection of metal film MELF resistors.1W to .5W, 0.1Ω to 22MΩ, 0.1% to 5%, 10ppm to 100ppm/°C
Low cost, quick delivery (available on SWIFTTM program)
Precision performance, excellent environmental stability
Series MHM hermetic sealed is an industry first!
RoHS
Metal film performance, economical price!
RCD Series MGP melf* resistors utilize precision film technology
which is inherently low inductance, low noise, and high stability
even after extended periods. Heavy solder plating assures
excellent solderability and long shelf life. Series MHM offers
hermetically sealed environmental protection and utmost
reliability. MGP series parts are color banded, MHM are alphanumerically marked with resistance and tolerance. *Melf = metal
electrode face-bonded (cylindrical component).
OPTIONS
Option S: Increased power (refer to chart below)
Option P: Increased pulse capability
Option F: Flameproof coating (per UL94V0)
Dozens of additional options are available... burn-in, special
marking, non-standard values, high frequency designs,
matched sets, temp. sensitive, zero-ohm jumpers, etc.
Customized components are an RCD specialty!
L
Wattage
(Std)
D
W
Inch [mm]
t
SPECIFICATIONS
RCD
Type
Term.W is
RoHS
compliant
& 260°C
compatible
Wattage
(Opt. 'S')
Resistance
Range2
Voltage
Rating1, 2
Dielectric
Strength2
L±.012 [.3]
D±.008 [.2]
W (Min.)
t (Max) 2
MGP45
.1W
.15W
100V
1Ω to 1M
200V
.079 [2.0]
.044 [1.12]
.012 [.3]
.003 [.076]
MGP50
.125W
.25W
200V
0.18Ω to 10M
250V
.135 [3.4]
.057 [1.45]
.02 [.5]
.004 [.1]
MGP55
.25W
.5W
250V
0.1Ω to 22M
350V
.232 [5.9]
.085 [2.15]
.024 [.6]
.006 [.15]
MHM553
.125W
.25W
250V
10Ω to 200K
350V
.275 [7.0]
.120 [3.05]
.050 [1.27]
.006 [.15]
PERFORMANCE
M GP S e r ie s * M H M S e r ie s *
TC R (10 & 15ppm avai l on custom basi s)
Op e ra ti ng Te mp e ra ture Ra ng e
P o we r D e ra ti ng a b o ve 7 0 °C
S o ld e r a b i li t y ( 5 s e c @ 2 3 0 ° C )
1 0 0 p p m /° C s td , 1 0 0 p p m /° C s td ,
2 5 & 5 0 p p m a va i l 2 5 & 5 0 p p m a va i l
- 5 5 to + 1 5 5 ° C
- 6 5 to + 1 7 5 ° C
1 .1 8 % /° C
.9 5 % /° C
9 5 % c o ve ra g e
9 5 % c o ve ra g e
1 0 ,0 0 0 M Ω
1 0 ,0 0 0 M Ω
S ho rt-Ti me Ove rlo a d (5 s e c . @ 2 .5 x
p o we r no t to e xc e e d 2 x vo lta g e ra ti ng )
0 .2 5 %
( 0 .5 % Op t.S )
.0 2 5 %
( .0 5 % Op t.S )
Re s i s . t o S o ld e r He a t ( 2 6 0 ° C , 5 s e c . )
0 .2 %
.0 2 %
Te mp e ra ture C yc li ng (-5 0 °C + 1 2 0 °C )
0 .5 %
.0 2 %
0 .5 % * *
.0 5 % * *
0 .5 % ( 1 % Op t.S )
.1 % ( .2 % Op t.S )
Ins ula ti o n Re s i s ta nc e (D ry)
Moi sture (Mi l-S td202 M106 & Mi l-R-55342)
L o a d L i fe (1 0 0 0 ho urs ra te d p o we r)
* Typical performance levels listed are for standard products from 10Ω to 1M.
Consult factory for performance levels of extended range and modified designs.
** To ensure utmost reliability, care should be taken to avoid potential sources of
ionic contamination
APPLICATION NOTE #1: Temperature Rise (THS)
The THS of SM resistors depends largely on heat conduction through the
end terminations, which can vary significantly depending on PCB
material and layout (i.e. pad size, trace area, copper thickness, air flow,
etc.). Typical temp. rise at full rated power is 30-50°C (Opt.S=50-70°C).
APPLICATION NOTE #2: Resistor Selection
MGP resistors are ideal for semi-precision SM applications and are
generally more economical than thin film rectangular chips. For less
critical applications, consider low cost MCF carbon film melf resistors.
For increased performance, especially in high humidity applications
(such as Naval or tropical environments), consider MHM series. If flat
chips are preferred, consider BLU series (precision) or MC series (semiprecision/ general purpose). For higher power, consider MPF series.
2 Consult factory for non-standard range
3 Preliminary
PULSE WITHSTAND CHART (increased pulse levels avail.)
1000
Peak Power (Watts)
1 Max working voltage determined E= √(PxR), not to exceed the value listed.
100
MGP55SP
10
MGP50SP
MGP45SP
1
1uS
10uS
100uS
1mS
Pulse Duration
10mS
100mS
Pulse capability is dependent on res. value, waveform, repetition rate,
current, etc. Chart is a general guide for Opt. P pulse resistant version,
single pulse, with peak voltage levels not exceeding 1KV for MGP55SP,
700V MGP50SP, and 350V MGP45SP. Max pulse capability for standard
parts (w/o Opt.P) is 60% less. For improved performance and reliability,
a 30-50% pulse derating factor is recommended (or larger for frequent
pulses, high values, etc). Consult RCD for application assistance. Verify
selection by evaluating under worst-case conditions.
P/N DESIGNATION:
MGP50
- 1002 - F T
W
RCD Type
Options: S, P, F (leave blank if std)
Resis. Code: ≤1%: 3 signif. figures & multiplier,
e.g. R100= 0.1Ω, 1R00= 1Ω, 10R0=10Ω,1000= 100Ω, 1001= 1KΩ.
Resis. Code 2% - 10%: 2 signif. figures & multiplier,
e.g. R10= 0.1Ω, 1R0= 1Ω,100= 10Ω, 101=100Ω,102= 1K, 103=10K.
Tolerance: F=1% (std), B=0.1%, C=.25%, D=.5%, G=2%, J=5%
Packaging : B = Bulk, T = Tape & Reel
Optional TC: 10=10ppm, 25=25ppm, 50=50ppm (leave blank if std)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA031D
Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
20
Similar pages