XP Power MHP650PS24-EF Medical safety approval Datasheet

MHP650 Series
•
Medical Safety Approvals
•
End Fan, Top Fan & U’
‘ Channel Mechanical Options
•
-20 ºC to +70 ºC Operation
•
5 V Standby
•
AC OK, Remote On/Off and Active Current Share
•
Load Dependant Variable Fan Speed
•
Screw Terminals
•
3 Year Warranty
The MHP650 AC-DC power supply provides upto 650 W of output power in three mechanical packages to provide installation
flexibility in a range of medical applications.
The unit comprises of a main output with voltages from 12-48 VDC and two peripheral outputs providing a 12 VDC fan supply and a
5 VDC standby supply which can be utilitsed with the signals and control features of the unit to provide detection of loss of AC input
and remote on/off control.
Multiple units can used in parallel via the current share facility, providing higher power solutions. Inherently low earth leakage current,
and conducted EMC compliance to Class B also simplify higher power system design.
Packaged in a compact 8” (203 mm) x 4” (102 mm) x 2.6” (65 mm) and carrying IEC60601 family safety approvals, the MHP650 has
a load dependant variable speed fan, is fully protected with overtemperature shutdown and provides full power from -20 ºC to 50 ºC
and 50% power at +70 ºC.
xppower.com
Models and Ratings
End Fan Models (-EF)
Output Voltage V1
12 V
15 V
24 V
28 V
36 V
48 V
Max Output
Current V1
50.0 A
40.0 A
27.0 A
23.0 A
18.0 A
13.5 A
Fan Supply V2
Not
Not
Not
Not
Not
Not
Standby Supply V3
Available
Available
Available
Available
Available
Available
5V
5V
5V
5V
5V
5V
/
/
/
/
/
/
0.2
0.2
0.2
0.2
0.2
0.2
Max Output Power
Model Number
607 W
607 W
657 W
651 W
657 W
657 W
MHP650PS12-EF
MHP650PS15-EF
MHP650PS24-EF
MHP650PS28-EF
MHP650PS36-EF
MHP650PS48-EF
Max Output Power
Model Number
607 W
607 W
657 W
651 W
657 W
657 W
MHP650PS12-TF
MHP650PS15-TF
MHP650PS24-TF
MHP650PS28-TF
MHP650PS36-TF
MHP650PS48-TF
A
A
A
A
A
A
Top Fan Models (-TF)
Output Voltage V1
12 V
15 V
24 V
28 V
36 V
48 V
Max Output
Current V1
50.0 A
40.0 A
27.0 A
23.0 A
18.0 A
13.5 A
Fan Supply V2
Not
Not
Not
Not
Not
Not
Standby Supply V3
Available
Available
Available
Available
Available
Available
5V
5V
5V
5V
5V
5V
/
/
/
/
/
/
0.2
0.2
0.2
0.2
0.2
0.2
A
A
A
A
A
A
U Channel Models
Output Voltage V1
12 V
15 V
24 V
28 V
36 V
48 V
Max Output
Current V1
50.0 A
40.0 A
27.0 A
23.0 A
18.0 A
13.5 A
Fan Supply V2
12 V
12 V
12 V
12 V
12 V
12 V
/
/
/
/
/
/
0.5
0.5
0.5
0.5
0.5
0.5
Standby Supply V3
A
A
A
A
A
A
5V
5V
5V
5V
5V
5V
/
/
/
/
/
/
0.2
0.2
0.2
0.2
0.2
0.2
Max Output Power(1)
A
A
A
A
A
A
601 W
601 W
651 W
655 W
651 W
651 W
Model Number
MHP650PS12
MHP650PS15
MHP650PS24
MHP650PS28
MHP650PS36
MHP650PS48
1. U Channel models require a minimum of 5.5 ms airflow from the system for cooling
Input Characteristics
Characteristic
Input Voltage - Operating
Input Frequency
Power Factor
Input Current - No Load
Input Current - Full Load
Inrush Current
Earth Leakage Current
Input Protection
Minimum
85
47
Typical
115/230
50/60
>0.9
0.15/0.3
6.5/3.2
Maximum
264
63
40
90/175
250
T16 A / 250 V internal fuse in both line and neutral
Units
VAC
Hz
A
A
A
μA
Notes & Conditions
Derate output power < 90 VAC. See fig. 1.
EN61000-3-2 class A compliant
115/230 VAC
115/230 VAC
230 VAC cold start, 25 °C
115/230 VAC/50 Hz (Typ.), 264 VAC/60 Hz (Max.)
Input Derating Curve
Figure 1
100
Output Power (%)
90
80
70
60
50
40
85
90
264
Input Voltage (VAC)
2
xppower.com
Output Characteristics
Characteristic
Output Voltage - V1
Initial Set Accuracy
Output Voltage Adjustment
Minimum Load
Start Up Delay
Hold Up Time
Drift
Line Regulation
Load Regulation
Minimum
12
Typical
±0.2
±0.5
±1 (V1) , ±5 (V3)
Units
VDC
%
%
A
s
ms
%
%
%
4
%
1
140
145
% pk-pk
%
% I nom
0.02
%/˚C
°C
0
0.5
20
Transient Response - V1
Ripple & Noise
Overvoltage Protection
Overload Protection
Short Circuit Protection
Temperature Coefficient
Overtemperature Protection
Maximum
48
±1 (V1) , ±5 (V3)
±10
115
110
Notes & Conditions
See Models and Ratings table
50% load, 115/230 VAC
V1 only. See mechanical details.
230 VAC full load
After 20 min warm up
90-264 VAC
0-100% load.
Recovery within 1% in less than 500 μs
for a 50-75% and 75-50% load step
V1: 20 MHz bandwidth
Vnom DC. Output 1 only, recycle input to reset
Output 1 only, auto reset. See fig 2.
Auto Recovery, hiccup mode
Protects unit from overtemperature. Auto reset.
Output Overload Characteristic
Unit enters
hiccup mode
Figure 2
Typical V1 Overload Characteristic (MHP650PS12 shown)
3
xppower.com
General
Specifications
Xxxxxxxxxx
Characteristic
Efficiency
Isolation: Input to Output
Input to Ground
Output to Ground
Switching Frequency
Power Density
Minimum
Typical
84
Maximum
4000
1500
500
70/200
8.2
Mean Time Between Failure
260
Weight
Units
%
VAC
VAC
VDC
kHz
W/in3
kHrs
2.8 (1.25)
lb (kg)
Notes & Conditions
See fig 3 & 4
PFC converter / Main converter
MIL-HDBK-217F at 25 °C GB
See mechanical details
Efficiency vs Load
MHP650PS12
Figure 3
MHP650PS48
Figure 4
Signals & Control
Characteristic
Notes & Conditions
Signals & Control
Remote Sense
AC OK / Power Fail
Remote On/Off (Inhibit/Enable)
4
Compensates for 0.5 V total voltage drop
Open collector referenced to negative sense, transistor normally off when AC is good (see fig. 5 & 8)
AC OK: Provides ≥ 5 ms warning of loss of output from AC failure
Uncommited isolated optocoupler diode, powered diode inhibits both V1 & V2 (fan supply) (see fig.6 & 9)
Current Share
When more than one unit (with the same output voltage) is used in parallel to increase output current, the
current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). This will force the
current to share between the outputs. Similarly pins 2/4 of each unit should also be connected as a ground
reference. Units share current within 10% of each other at full load. See fig 7.
Standby Supply V3
Isolated 5 V/0.2 A supply, always present when AC supplied.
xppower.com
Signals & Control
AC OK/Power Fail
Figure 5
POWER SUPPLY
5 V Standby
Pin 9
Max 12 V 20 mA
330R
AC OK Collector
Pin 3
AC OK Emitter
Pin 2 (-sense)
Transistor On (<0.8 V):
AC NOT OK
Transistor Off (>4.5 V):
AC OK
5 V Standby
Return Pin 10
J3 Logic Connector
Remote On/Off (Inhibit)
Figure 6
INHIBIT HI
INHIBIT LOW
800 R
POWER SUPPLY
800 R
POWER SUPPLY
5 V Standby
Pin 9
5 V Standby
Pin 9
2-5 mA
100 R
2-5 mA
Inhibit Hi
Pin 7
sistor On (<0.8 V):
NOT OK
sistor Off (>4.5 V):
OK
100 R
Inhibit Hi
Pin 7
Inhibit Lo
Pin 8
Inhibit Lo
Pin 8
5 V Standby
Return Pin 10
5 V Standby
Return Pin 10
Chassis J3 Logic Connector
Signal
Chassis J3 Logic Connector
High: Power Supply OFF
Low or Floating: Power Supply ON
Signal
High: Power Supply ON
Low or Floating: Power Supply OFF
Signals - Parallel Load & Current Share Connection Example
MHP650PSXX (1)
MHP650PSXX (2)
V1 Output
V1 Output
-
+
Current
Share
-
+
MHP650PSXX (3)
V1 Output
-
Current
Share
+
ns
e
se
en
-S
Se
e
+
se
en
-S
ns
e
Se
+ Sens
+
- Sense
Figure 7
-
+
Load
5
xppower.com
Parallel AC OK Connection
Power Supply (1)
5 V Standby
Pin 9
330R
AC OK Collector
Pin 3
AC OK Emitter
Pin 2
5 V Standby
Return Pin 10
J2 Connector
Power Supply (2)
OK Collector
Pin 3
Figure 8
OK Emitter
Pin 2
J2 Connector
Power Supply (3)
AC OK
Collector
Pin 3
Transistor On (<0.8 V): AC OR DC OK
Transistor Off (>4.5 V): AC OR DC NOT OK
AC OK Emitter
Pin 2
J2 Connector
Parallel Remote Inhibit Connection
PSU 1
Figure 9
6
PSU 8
PSU 2
Pin 7
Pin 7
Pin 7
Pin 8
Pin 8
Pin 8
Open or TTL high = PSU On
Short circuit or TTL Low = PSU Off
xppower.com
Environmental
Characteristic
Minimum
Operating Temperature
-20
Low Temperature Start Up
-40
Storage Temperature
-40
Typical
Maximum
Units
+70
+85
Notes & Conditions
°C
Derate linearly from +50 °C at 2.5%/°C
to 50% at 70 °C. See fig 10.
°C
Some specification parameters maybe exceeded until
after 20 minutes warm up period.
°C
Integral variable speed fan load dependant.
See fig 11.
Non-condensing
Cooling
Humidity
Operating Altitude
5
95
3000
%RH
m
3 x 30 g/11 ms shocks in both +ve & -ve
directions along the 3 orthogonal axis, total 18
shocks.
Single axis 10-500 Hz at 2 g x 10 sweeps
Shock
Vibration
Temperature Derating Curve
100
Figure 10
90
80
Output Power (%)
70
60
50
40
30
20
10
0
-20
0
+20
+40
+50
+60
+70
Ambient Temperature (ºC)
Fan Speed Control
100
Fan Speed (%)
Figure 11
50
0
0
25
50
75
100
Output Power (%)
Electromagnetic Compatibility - Immunity
Phenomenon
Harmonic Current
ESD
Radiated
EFT
Surges
Conducted
Magnetic
Standard
EN61000-3-2
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Dips and Interruptions
EN60601-1-2
Test Level
Class A
3
3
3
Installation class 3
3
3
Dip: 30% 10 ms
Dip: 60% 100 ms
Dip: 100% 5000 ms
Dip: 30% 500 ms
Criteria
Notes & Conditions
A
A
A
A
A
A
A
B
B
A
Dip: 60% 100 ms
A
Dip: 100% 10 ms
Dip: 100% 5000 ms
A
B
115 VAC input requires 50% load
derating otherwise criteria B
7
xppower.com
Electromagnetic Compatibility - Emissions
Phenomenon
Standard
Conducted
Radiated
Voltage Fluctuations
Test Level
EN55022 / EN55011
EN55022 / EN55011
EN61000-3-3
Criteria
Notes & Conditions
Level B
Level A
Safety Agency Approvals
Safety Agency
CB Report
UL
TUV
CE
Safety Standard
Certificate #US/17354/UL, IEC60601-1 Ed 3 Including Risk Management
UL File # E146893, ANSI/AAMI ES 60601-1:2005 & CSA C22.2 No. 60601-1:08
TUV Certificate # B11 09 57396 110, EN60601-1:2006
LVD
Category
Medical
Medical
Medical
Primary to Secondary
2 x MOPP (Means of Patient Protection)
Primary to Earth
1 x MOPP (Means of Patient Protection)
Equipment Protection Class
Safety Standard
Notes & Conditions
IEC60601-1 Ed 3
See safety agency conditions of
acceptibility for details
Means of Protection
Class I
Category
IEC60601-1 Ed 3
Mechanical Details - End Fan (Suffix -EF)
Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Vo+
L
E
N
Vo-
Standard Terminal
Block, M3.5 Screw 3
Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
2.49
(63.3)
V1 Adjustment
Output On, LED
9.18 (233.2)
2.50 (63.5)
2 x M3 THD both side faces
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
Pin 2
AIRFLOW
Pin 10
2.86 (72.6)
4.00
(101.6)
CL
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.8 lb (1.25 kg).
8
6.53 (165.8)
Pin 9
J3: Logic Connector
8.00 (203.2)
4 x M3 THD
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
Pin 1
1.95
(49.5)
0.87
(22.2)
J2 Logic Connector
(JST B10B-PHDSS)
Pin
Function
1
+ Sense
2
- Sense
3
AC OK/Power Fail
4
- Sense
5
Current Share
6
Current Share
7
+ Inhibit
8
- Inhibit
9
+5 V Standby (V3)
10
5 V Standby Return (V3)
3. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no.
SPHD-001T-P0.5.
xppower.com
Xxxxxxxxxx Details - Top Fan (Suffix -TF)
Mechanical
Standard Terminal Block, M3.5 Screw 3, Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Standard Terminal Block, M4 Screw, 6 Pins, 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Vo+
L
E
Vo-
N
V1 Adjustment
Output On, LED
2.50 (63.5)
8.00 (203.2)
2.58 (65.5)
AIRFLOW
2 x M3 THD both side faces
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
1.95
(49.5)
Pin 2
Pin 1
Pin 10
pin 9
J3: Logic Connector
2.86 (72.6)
4.00
(101.6)
4 x M3 THD
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
Pin
1
2
3
4
5
6
7
8
9
10
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.6 lb (1.2 kg).
0.87
(22.2)
6.53 (165.8)
J2 Logic Connector
(JST B10B-PHDSS)
Function
+ Sense
- Sense
AC OK/Power Fail
- Sense
Current Share
Current Share
+ Inhibit
- Inhibit
+5 V Standby (V3)
5 V Standby Return (V3)
3. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no.
SPHD-001T-P0.5.
9
xppower.com
Xxxxxxxxxx Details - U Channel (No Suffix)
Mechanical
Standard Terminal Block
M3.5 Screw 3 Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Standard Terminal Block, M4 Screw 6 Pins 9.5 mm Center
torque 10.62 lbs-in (1.2 Nm)
Vo+
L
E
Vo-
N
V1 Adjustment
Output On, LED
8.00 (203.2)
2.46 (62.5)
2 x M3 THD both side faces
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
System Airflow
Required
Pin 2
Pin 1
Pin 10
Pin 9
1.95
(49.5)
J3: Logic Connector
Pin 1
J1: Fan Connector
4.00
(101.6)
CL
2.86
(72.6)
4 x M3 THD
0.15 (3.8) max screw penetration
max torque 4.0-5.0 lbs-in (0.45-0.57 Nm)
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.4 lb (1.1 kg).
3. Requires system airflow, see thermal considerations.
6.53 (165.80)
0.87
(22.2)
4. J1 Mating plug: JST part no. PHR-2, contact: JST part no.
SPH-002T-P0.5S.
5. J2 Mating plug: JST part no. PHDR-10VS, contact: 26-22
AWG JST part no. SPHD-001T-P0.5.
J2 Logic Connector
(JST B10B-PHDSS)
Pin
Function
1
+ Sense
2
- Sense
3
AC OK/Power Fail
4
- Sense
5
Current Share
6
Current Share
7
+ Inhibit
8
- Inhibit
9
+5 V Standby (V3)
10 5 V Standby Return (V3)
J1 Fan Connector
(JST B2B-PH-KL (LF) (SN)
Pin
Function
1
+V
2
-V
Thermal Considerations (U Channel)
Temperature Measurements (Ambient ≤50 ºC)
Recommended
Maximum
Temperature ºC
Temperature ºC
C55 Capacitor
70
105
T302 Transformer
90
120
C314 Capacitor
70
105
D311 Diode
100
120
Component
10
In order to ensure reliable operation in the end use application the
recommended component temperatures listed should not be exceeded.
Higher temperatures up to the maximum stated can be used but
product lifetime may be reduced.
26-Aug-14
MHP1000 Series
•
1200 W High Line Output Power
•
Rugged Industrial Construction
•
Variable Speed Fan for Noise Reduction
•
-40 °C to +70 °C Operation
•
5 V Standby
•
AC OK, Remote On/Off and Active Current Share
•
Screw Terminals
•
3 Year Warranty
The MHP1000 AC-DC power supply provides upto 1200 W of output power in a compact rugged mechanical package, suitable for a
range of medical applications.
The unit comprises of a main output with voltages from 12-48 VDC and a 5 VDC standby supply which can be utilitsed with the
signals and control features of the unit to provide detection of loss of AC input and remote on/off control.
Multiple units can be used in parallel via the current share facility, providing higher power solutions. Inherently low earth leakage
current, and conducted EMC compliance to Class B also simplify higher power system design.
Packaged in a compact 9.5” (241 mm) x 5.9” (150 mm) x 2.4” (61 mm) and carrying IEC60601 family safety approvals, the MHP1000
has a load dependant variable speed fan is fully protected with overtemperature shutdown and provides -40 ºC start up with full
power from -20 ºC to 50 ºC and 50% power at +70 ºC.
xppower.com
Models and Ratings
Max Output Current V1
Output Voltage V1
<180 VAC
12 V
15 V
24 V
28 V
36 V
48 V
>180 VAC
83.0 A
67.0 A
42.0
36.0
28.0
21.0
Max Output Power
Standby Supply V2
A
A
A
A
50.0
43.0
34.0
25.0
A
A
A
A
<180 VAC
5V
5V
5V
5V
5V
5V
/
/
/
/
/
/
1.0
1.0
1.0
1.0
1.0
1.0
A
A
A
A
A
A
Model Number
>180 VAC
1001 W
1010 W
1013 W
1013 W
1013 W
1013 W
1200 W
1200 W
1200 W
1200 W
MHP1000PS12
MHP1000PS15
MHP1000PS24
MHP1000PS28
MHP1000PS36
MHP1000PS48
Input Characteristics
Characteristic
Input Voltage - Operating
Input Frequency
Minimum
85
47
Typical
115/230
50/60
Units
VAC
Hz
>0.9
Power Factor
Input Current - No Load
Input Current - Full Load
(1000 W)
Inrush Current
Earth Leakage Current
Input Protection
Maximum
264
63
EN61000-3-2 class A compliant
0.35/0.5
A
115/230 VAC
10.9/5.3
A
115/230 VAC
A
μA
230 VAC cold start, 25 ºC
115/230 VAC/50 Hz (Typ.), 264 VAC/60 Hz (Max.)
60
75/140
250
T20 A/250 V internal fuse in both lines
Input Derating Curve
Notes & Conditions
Derate output power < 90 VAC. See fig. 1.
100
Figure 1
Output Power (%)
90
80
70
60
50
40
85
90
264
Input Voltage (VAC)
2
xppower.com
Output Characteristics
Characteristic
Output Voltage - V1
Initial Set Accuracy
Output Voltage Adjustment
Minimum Load
Start Up Delay
Hold Up Time
Drift
Line Regulation
Load Regulation
Minimum
12
Typical
Maximum
48
±1 (V1) , ±5 (V2)
±10
±0.2
±0.5
±1 (V1) , ±5 (V2)
Units
VDC
%
%
A
s
ms
%
%
%
4
%
1
145
140
% pk-pk
%
% I nom
0.02
%/˚C
°C
0
0.5
20
Transient Response - V1
Ripple & Noise
Overvoltage Protection
Overload Protection
Short Circuit Protection
Temperature Coefficient
Overtemperature Protection
115
110
Notes & Conditions
See Models and Ratings table
50% load, 115/230 VAC
V1 only. See mechanical details.
230 VAC full load
After 20 min warm up
90-264 VAC
0-100% load.
Recovery within 1% in less than 500 μs
for a 50-75% and 75-50% load step
V1: 20 MHz bandwidth
Vnom DC. Output 1 only, recycle input to reset
Output 1 only, auto reset. See fig 2.
Auto Recovery, hiccup mode
Protects unit from overtemperature. Auto reset.
Output Overload Characteristic
Output Voltage (V)
14
12
10
8
6
4
Unit enters
hiccup mode
2
0
0
5
10
15
20
25
30
35
Output Current (A)
Figure 2
Typical V1 Overload Characteristic (MHP1000PS12 shown)
3
xppower.com
General
Specifications
Xxxxxxxxxx
Characteristic
Efficiency
Isolation: Input to Output
Input to Ground
Output to Ground
Switching Frequency
Power Density
Mean Time Between Failure
Weight
Minimum
Typical
84
Maximum
4000
1500
500
70/200/130
8.9
Units
%
VAC
VAC
VDC
kHz
W/in3
Notes & Conditions
See fig 3 & 4
PFC converter / Main converter / Standby
260
kHrs
MIL-HDBK-217F at 25 ºC GB
2.1 (940)
lb (g)
See mechanical details
Efficiency vs Load
MHP1000PS12
Figure 3
MHP1000PS48
Figure 4
Signals & Control
Characteristic
Notes & Conditions
Signals & Control
Remote Sense
AC OK / Power Fail
Remote On/Off (Inhibit/Enable)
4
Compensates for 0.5 V total voltage drop
Open collector referenced to negative sense, transistor normally off when AC is good (see fig. 5 & 8)
AC OK: Provides ≥ 5 ms warning of loss of output from AC failure
Uncommited isolated optocoupler diode, powered diode inhibits both V1 & V2 (fan supply) (see fig.6 & 9)
Current Share
When more than one unit (with the same output voltage) is used in parallel to increase output current, the
current share pins 5/6 of one unit should be connected to pins 5/6 of the other unit(s). This will force the
current to share between the outputs. Similarly pins 2/4 of each unit should also be connected as a ground
reference. Units share current within 10% of each other at full load. See fig 7.
Standby Supply V2
Isolated 5 V/1.0 A supply, always present when AC supplied.
xppower.com
Signals & Control
AC OK/Power Fail
Figure 5
POWER SUPPLY
5 V Standby
Pin 9
Max 12 V 20 mA
330R
AC OK Collector
Pin 3
Transistor On (<0.8 V): AC NOT OK
Transistor Off (>4.5 V): AC OK
AC OK Emitter
Pin 2 (-sense)
5 V Standby
Return Pin 10
J2 Logic Connector
Remote On/Off (Inhibit)
Figure 6
INHIBIT HI
INHIBIT LOW
800 R
POWER SUPPLY
800 R
POWER SUPPLY
5 V Standby
Pin 9
5 V Standby
Pin 9
2-5 mA
100 R
2-5 mA
100 R
Inhibit Hi
Pin 7
Inhibit Hi
Pin 7
V):
V):
Inhibit Lo
Pin 8
Inhibit Lo
Pin 8
5 V Standby
Return Pin 10
5 V Standby
Return Pin 10
Chassis J3 Logic Connector
Signal
Chassis J3 Logic Connector
High: Power Supply OFF
Low or Floating: Power Supply ON
Signal
High: Power Supply ON
Low or Floating: Power Supply OFF
Signals - Parallel Load & Current Share Connection Example
MHP1000PSXX (1)
MHP1000PSXX (2)
V1 Output
V1 Output
-
+
Current
Share
-
+
MHP1000PSXX (3)
V1 Output
-
Current
Share
+
ns
e
se
en
-S
Se
e
+
se
en
-S
ns
e
Se
+ Sens
+
- Sense
Figure 7
-
+
Load
5
xppower.com
Parallel AC OK Connection
Power Supply 1
5 V Standby
Pin 9
330R
AC OK Collector
Pin 3
AC OK Emitter
Pin 2
5 V Standby
Return Pin 10
J3 Connector
Power Supply 2
OK Collector
Pin 3
Figure 8
OK Emitter
Pin 2
J3 Connector
Power Supply 3
AC OK
Collector
Pin 3
Transistor On (<0.8 V): AC NOT OK
Transistor Off (>4.5 V): AC OK
AC OK Emitter
Pin 2
J3 Connector
Parallel Remote Inhibit Connection
PSU 1
Figure 9
6
PSU 8
PSU 2
Pin 7
Pin 7
Pin 7
Pin 8
Pin 8
Pin 8
Open or TTL high = PSU On
Short circuit or TTL Low = PSU Off
xppower.com
Environmental
Xxxxxxxxxx
Characteristic
Minimum
Operating Temperature
-20
Low Temperature Start Up
-40
Storage Temperature
-40
Typical
Maximum
Units
+70
+85
Notes & Conditions
°C
Derate linearly from +50 ºC at 2.5%/ºC
to 50% at 70 ºC. See fig 10.
°C
Some specification parameters maybe
exceeded until after 20 minutes warm up
period.
°C
2 x integral variable speed fans
load dependant. See fig 11.
Non-condensing
Cooling
Humidity
Operating Altitude
5
95
3000
%RH
m
Shock
3 x 30 g/11 ms shocks in both +ve & -ve
directions along the 3 orthogonal axis,
total 18 shocks.
Vibration
Single axis 10-500 Hz at 2 g x 10 sweeps
Temperature Derating Curve
100
Figure 10
90
80
Output Power (%)
70
60
50
40
30
20
10
0
-20
0
+20
+40
+50
+60
+70
Ambient Temperature (ºC)
Fan Speed Control
100
Fan Speed (%)
Figure 11
50
0
0
25
50
75
100
Output Power (%)
Electromagnetic Compatibility - Immunity
Phenomenon
Low Voltage PSU EMC
Harmonic Current
ESD
Radiated
EFT
Surges
Conducted
Standard
EN61204-3
EN61000-3-2
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Dips and Interruptions
EN60601-1-2
Test Level
High severity level
Class A
3
3
3
Installation class 3
3
Dip: 30% 25 AC Cycles
Dip: 60% 5 AC Cycles
Dip: 100% 0.5 AC Cyles
Int: >95% 5000 ms
Criteria
as below
A
A
A
A
A
A
A
A
B
Notes & Conditions
230 VAC 100% load, 100 VAC 50% load
7
xppower.com
Electromagnetic Compatibility - Emissions
Phenomenon
Conducted
Radiated
Voltage Fluctuations
Standard
EN55011/22
EN55011/22
EN61000-3-3
Test Level
Class B
Class A
Criteria
Notes & Conditions
Safety Agency Approvals
Safety Agency
CB Report
UL
TUV
Safety Standard
Certificate #US/18260/UL, IEC60601-1 Ed 3 Including Risk Management
UL File # E146893, ANSI/AAMI ES 60601-1:2005 & CSA C22.2 No. 60601-1:08
TUV EN60601-1:2006
Primary to Secondary
2 x MOPP (Means of Patient Protection)
Primary to Earth
1 x MOPP (Means of Patient Protection)
Means of Protection
Category
Medical
Medical
Medical
Category
IEC60601-1 Ed 3
Equipment Protection Class
Safety Standard
Notes & Conditions
Class I
IEC60601-1 Ed 3
See safety agency conditions of
acceptability for details
Mechanical Details
VO+
VO-
Standard Terminal Block, M6 Screw, 4 Pins 0.62 (16.0) center
Torque 26.0 lbs-in (2.94 Nm)
5.90
(149.8)
2.91
(73.9)
Output On, LED
A
V1 Adjustment
N
1.47
(37.4)
L
2.40 (61.0)
9.48 (240.9)
1.20 (30.5)
9.55 (242.64)
Standard Terminal Block, M4 Screw
3 Pins 0.37 (9.5) center
Torque 10.62 lbs-in (1.2 Nm)
9.41 (238.9)
4 x M4-0.7 THD both side faces
0.15 (3.8) max screw penetration
max torque 10.62 lbs-in (1.2 Nm)
B
B
Airflow
1.20 (30.5)
4 x M4-0.7 THD both side faces
0.15 (3.8) max screw penetration
max torque 10.62 lbs-in (1.2 Nm)
B
B
4.50
(114.3)
CL
Pin 2
Pin 1
Pin 10
Pin 9
B
J3 Logic Connector
(JST B10B-PHDSS)
Pin
Function
1
+ Sense
2
- Sense
3
AC OK/Power Fail
4
- Sense
5
Current Share
6
Current Share
7
+ Inhibit
8
- Inhibit
9
+5 V Standby
10
-5 V Standby
B
Detail A J3: Logic Connector
6.70 (170.2)
1.33 (33.8)
Notes:
1. Dimensions shown in inches (mm).
2. Weight: 2.8 lb (1.25 kg).
8
3. J3 Mating plug: JST part no. PHDR-10VS, contact: 26-22 AWG JST part no.
SPHD-001T-P0.5.
22-Feb-13
Similar pages