marlow industries inc.® Thermoelectric Cooler MI3021T Performance Values Hot Side Temperature (°C) 27°C 50°C 96 109 Qmax (watts): 0.33 0.38 Imax (amps): 1.3 1.3 Vmax (vdc): 1.9 2.2 AC Resistance (ohms): 1.42 --- ∆ Tmax (°C-dry N2): Mechanical Characteristics Positive Lead .260 [6.60] .100 [2.54] Leads: 28AWG (0.33) BUS Solid Tinned Copper Negative Lead .100 [2.54] 2.00 +/-.25 [50.80+/-6.35] .260 [6.60] .004 [0.10] Cold Side A .001 [0.03] .212+/-.010 [5.38 +/-0.25] .001[0.03] Ceramic Material: Alumina (AC) or Beryllia (BC) Millimeters are in [ ] Ordering Options A • MI3021T-01 both surfaces are metallized • MI3021T-02 hot side exterior is metallized • MI3021T-03 no metallization • For example, and MI3021T with only the hot side metallized is specified as an MI3021T-02AC Pretinned metallized ceramic surface(s) with 117°C solder. Thermistor mounted on edge of cold side ceramic. (Calibration available.) Elevated temperature burn-in with test data provided. 102-0048, Rev E Thermoelectric Cooler MI3021T Performance Curves Environment: One atmosphere dry nitrogen Hot Side Temperature: 27°C 80.0 60.0 40.0 VOLTAGE (VDC) 20.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 HEAT LOAD (WATTS) 120.0 100.0 80.0 60.0 40.0 20.0 0.0 0.0 2.0 2.0 1.6 1.2 Q=0 T=0 0.8 0.4 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 CURRENT (AMPS) VOLTAGE (VDC) T (C) 100.0 HEAT LOAD (WATTS) T (C) 120.0 Hot Side Temperature: 50°C 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 1.6 1.2 Q=0 T=0 0.8 0.4 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 CURRENT (AMPS) For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, consult one of our Applications Engineers. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 TEL: 214-340-4900 FAX: 214-341-5212 Internet: http://www.marlow.com Marlow Industries Europe Aberdeen House, South Road Haywards Heath West Sussex RH164NG UK TEL: +44 (0)1444-443404 FAX: +44 (0)1444-443334 Marlow Industries Asia 1-1-8-401 Uehara, Shibuya-ku Tokyo, Japan 151-0064 TEL: +81 (3) 5454-5280 FAX: +81 (3) 5454-5281 Copyright 2000, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0048, Rev E