marlow industries inc.® Thermoelectric Cooler MI6030 Performance Values Hot Side Temperature (°C) 27°C 50°C ∆ Tmax (Vacuum): 133 150 Qmax (watts): 0.58 0.65 Imax (amps): 3.6 3.7 Vmax (vdc): 6.3 7.2 AC Resistance (ohms): 1.65 --- Mechanical Characteristics Positive Lead MARLOW .855 [21.72] Leads: 22 AWG (0.64) Bus Solid Tinned Copper .205 [5.21] INDUS. Negative Lead .205 [5.21] 4.00 +/-.25 [101.60+/-6.35] 1.113 [28.27] Cold Side .010 [0.25] A .001 [0.03] .816+/-.020 [20.73 +/-0.51] .003 [0.08] Ceramic Material: Beryllia (BC) Millimeters are in [ ] Ordering Options MI6030-01 MI6030-02 MI6030-03 A • both surfaces are metallized – cooler is mounted and shipped on test base hot side exterior is metallized – cooler is mounted and shipped on test base • • • For example, and MI6030 with only the hot side metallized is specified as an MI6030-02BC Pretinned metallized ceramic surface(s) with 117°C solder. Thermistor mounted on edge of cold side ceramic. (Calibration available.) Elevated temperature burn-in with test data provided. no exterior metallization 102-0056, Rev H Thermoelectric Cooler MI6030 Performance Curves Environment: Vacuum Hot Side Temperature: 27°C 0.00 0.10 0.20 80.0 0.30 0.40 40.0 6.0 4.0 Q=0 T=0 2.0 0.0 0.0 1.0 2.0 3.0 CURRENT (AMPS) 4.0 0.20 0.30 80.0 0.40 0.50 0.60 0.60 0.0 0.10 40.0 0.50 HEAT LOAD (WATTS) 0.00 120.0 0.0 VOLTAGE (VDC) T (C) 120.0 160.0 T (C) HEAT LOAD (WATTS) 160.0 VOLTAGE (VDC) Hot Side Temperature: 50°C 6.0 4.0 Q=0 T=0 2.0 0.0 0.0 1.0 2.0 3.0 CURRENT (AMPS) 4.0 For performance information with hot side temperatures other than 27°C or 50°C, consult one of our Applications Engineers. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 TEL: 214-340-4900 FAX: 214-341-5212 Internet: http://www.marlow.com Marlow Industries Europe Aberdeen House, South Road Haywards Heath West Sussex RH164NG UK TEL: +44 (0)1444-443404 FAX: +44 (0)1444-443334 Marlow Industries Asia 1-1-8-401 Uehara, Shibuya-ku Tokyo, Japan 151-0064 TEL: +81 (3) 5454-5280 FAX: +81 (3) 5454-5281 Copyright 2000, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0056, Rev H