Advantech MIC-3927BE Compactpciâ® intelligent chassis management module (picmgâ® 2.9) Datasheet

MIC-3927
CompactPCI® Intelligent Chassis
Management Module (PICMG® 2.9)
Features
 Compatible with PICMG 2.1, 2.16, and 2.9-compliant components
 Monitors via the Intelligent Platform Management Bus (IPMB) protocol
 Provides isolated IPMI signals for each slot for maximum security and
reliability
 Out-of band management interface
 Hot swap support for IPMI based field replaceable components
 Alarm cut off push button on the front panel
 Standalone system monitoring: no driver needed, independent OS
RoHS
COMPLIANT
2002/95/EC
Introduction
The MIC-3927 is a proprietary form factor Chassis Management Module (CMM) intended for use with PICMG* 2.1, 2.16, and 2.9-compliant systems (the CompactPCI* Hot Swap,
Packet Switching Backplane, and System Management specifications respectively). The MIC-3927 plugs into a dedicated slot in compatible systems. It provides centralized management
and alarm notification for system power supplies and fans as well as single board operation status. The CMM may be paired with a backup for high-availability applications.
The MIC-3927 is essentially a special-purpose single board computer with a CPU, some memory, a PCI bus, an operating system and peripherals. The MIC-3927 monitors and
configures IPMI-based components in the chassis. When the thresholds for temperature and voltage limitations are reached or when failure occurs, the CMM will capture an event.
At the same time, the MIC-3927 sends SNMP traps and drives the Telco alarm relays that trigger onboard LEDs. The CMM can query FRU information (such as serial number, model
number, manufacture date, etc.), detect presence of components (such as fan tray, CPU board, etc.), and monitor the status of each component.
The MIC-3927 also has a built-in Web-based administration interface that allows users to monitor the system’s operation from any place with Internet connectivity. The MIC-3927
adds another dimension to the reliability of your most critical applications.
*IPMI function only supported for MIC-3390 and MIC-3392
Sensor Specifications
Voltage
Temperature
Fan Speed
Power Good
CPU Board Health
Digital Input/Output (optional)
Input
Input
Sensor
Interface
Range
Input
Range
Input
Range
Interface
Input
Max. SBC Monitoring
Input
Output
+3.3 VDC, +5 VDC, -5 VDC, +5 VSB, +12 VDC, -12 VDC, VBat
1 (onboard)
Thermistor
I2C
-40 ~ 120° C (-40 ~ 248° F)
9
700 ~ 10000 rpm
4
High > 2.4 VDC, Low < 0.8 VDC
I2C
CPU Vcore, CPU fan, CPU temperature (up to 2 CPUs), DC +5 V, DC -5 V, V (I/O), DC +12 V, DC -12 V
8 boards
4
4
MIC-3927
Hardware Specifications
CPU
Firmware
Memory
Interface
Interface
Baud Rate
Buzzer support
Time-out Signal for watchdog
timer detection
Charge Time
Battery Type
Capacity
Battery Life
Typical
Processor System
Ethernet
Serial Port
Miscellaneous
Battery
Power Requirement
Environment
Temperature
Humidity
Physical Characteristics
Dimensions (W x D)
RDC2880
2 MB Embedded Flash ROM
2 MB SRAM
10/100Base-T
RS-232
9600 bps
Yes
Yes
24 hr
Ni-MH
1500 mA-H (full charged, for 15~20 minutes operation, depending on the system configuration)
80% capacity @ 20° C after 1000 cycles of charge and discharge
5 V @ 550 mA
Operating
Non-Operating
0 ~ 60° C (-32 ~ 140° F)
-20 ~ 70° C (-4 ~ 158° F)
5 ~ 95 % RH, non-condensing
Kernel module: 40.5 x 93 mm (1.6" x 3.7")
Carrier module: 100 x 95 mm (3.9" x 3.7")
Ordering Information
Part Number
MIC-3927AE
MIC-3927BE
MIC-3927CE
Description
MIC-3927 alarm module for MIC-3056, MIC-3081
MIC-3927 alarm module for MIC-3038, MIC-3041
MIC-3927 alarm module for MIC-3042, MIC-3043
Firmware Specifications
System Status Monitoring and
Management
Alarm Notification
Supported Protocol
Management Function
Real-time system status monitoring: provides real-time status display in HTTP/Java graphical format
Monitor the temperature, fan speed and system voltage
Alarm event record display
E-mail: can setup up to 4 addresses to receive notification e-mails
Audible alarm sound
SMS support for receiving short message through mobile phone
TCP, UDP, IP, ICMP, DHCP, BOOTP, ARP, SNMP, HTTP, Telnet
Web-based remote configuration, control and monitor
Remote power up and power down
Firmware upgrade from serial port and Ethernet port
Supports Time Sync with system board
The SSL and SSH secure communications across Internet
RS-232 COM port
LAN port
Onboard Battery
Online Download www.advantech.com/products
Similar pages