Advantech MIC-5602A-M2E Advanced mezzanine card intel coreâ ¢ 2 duo processor amc Datasheet

MIC-5602
Advanced Mezzanine Card
Intel® Core™ 2 Duo Processor AMC
Features
 Supports Intel® Core™ 2 Duo processor Low Voltage and Ultra Low Voltage
 Intel® 3100 chipset 400/533 MHz FSB
 Up to 2 GB DDRII 400 MHz SDRAM with ECC
 One Gigabit Ethernet (RJ-45), one USB 2.0 port, and one console port
(mini-USB) to front panel
 AMC connector routes dual Gigabit Ethernet SerDes (x2), SATA (x2),
USB (x2), dual PCIe x4, or single PCIe x8
 Boot from network, CompactFlash, SATA, USB or onboard flash disk
 Supports IPMI v1.5 and Serial-over-LAN function
 AMC.0, AMC.1, AMC.2 and AMC.3 compliant
RoHS
COMPLIANT
2002/95/EC
Introduction
The MIC-5602 is a highly integrated single-width, mid-size, processor AMC. Its design is based on the low-power, high-performance Intel® Core™2 Duo LV and ULV processors
combined with the high-performance Intel 3100 chipset. The board includes 1 or 2 GB of soldered DDR2 400 MHz memory with ECC for higher MTBF and optimum cooling. To
facilitate development, test and integration while offering typical network connectivity once deployed, the front panel provides a gigabit Ethernet connector, a serial port and a USB
2.0 host port.
The MIC-5602 maximizes AMC edge connector connectivity for the best design flexibility. When redundancy or two separate interconnects are required, the board can be configured
with two PCI Express x4 ports or with a single PCI Express x8 port when throughput is essential. Two gigabit Ethernet ports provide AMC.2 compliance and offer control and data
plane connectivity to facilitate the migration of existing applications. Both ports connect to the 3100 chipset via PCI Express for maximum data throughput. Dual SATA interfaces
provide AMC.3–compliant storage and two USB ports offer further connectivity opportunities.
A dedicated Module Management Controller (MMC) monitors onboard conditions and manages hot swap operation for field upgrades or module replacement without the need to
power down the underlying system.
Specifications
Processor System
CPU
Chipset
BIOS
Bus
Memory
Ethernet
Mass Storage
SATA Interface
Serial Interface
USB Interface
Watchdog Timer
Hardware Monitor
Firmware
Operating System
Form Factor
Miscellaneous
Power Requirement
Front Side Bus
PCI Express
Technology
Max. Capacity
Controller
Interface
CompactFlash
Onboard
AMC edge connector
Other
I/O
I/O
AMC edge connector
Controller
Source Code
Update Standard
Compatibility
AMC
Interface
LEDs
Configuration
Consumption
Intel® Core™ 2 Duo ULV (U7500) and LV (L7400) up to 1.5 GHz
Intel 3100
AMI (1. Dual images with update rollback, 2. CMOS settings can be changed over IPMI, and 3. CMOS backup works
without battery)
400/533 MHz
PCI Express rev1.0a : one x8 and two x4 routed to AMC connector
DDRII 400 with ECC
2 GB
Intel 82571EB dual-port Gigabit Ethernet controller (support 802.3d compliant link aggregation)
One GbE accessible on front panel via RJ-45 and two SerDes links to AMC common options region ports 0 and 1 Optional expansion board with CF type-1 socket
1GB industrial grade internal flash disk (used as NV storage, emergency boot disk or diagnostics boot media)
Two SATA interfaces to common ports region 2-3
One SATA routed to CF daughter board
Routed to front panel as USB Slave interface through onboard USB to Serial converter
One USB 2.0 compliant host port (standard USB Connector) on front panel
Two USB 2.0 ports connect to rear AMC edge connector
AMC compliant watchdog
IPMI v1.5 compatible MMC
Pigeon Point System-based
HPM.1 compliant
Carrier Grade Linux (Wind River Platform for Network Equipment, Linux Edition 2.0)
Mid-size, single width
AMC.0 compliant
x1 blue for hot swap, x1 red/amber for failure and OOS, x1 green for general purpose
Core™2 Duo L7400 + 3100 + 1 GB on-board DDRII SDRAM
38.5 watts
MIC-5602
Block Diagram
COM2
Core2 Duo LV or ULV
1GB
Flash Disk
FSB
DDR PLL
IPMB-L
MMC
(optional expansion Module)
USB1
SATA21
DDR2
DRAM
LPC
c
c
r
SATA to PATA
Converter
CF Disk
AMC Con
FWH
TPM (optional)
Intel 3100
USB2 & USB3
Mini USB
Con.
USB-Serial
Converter
USB Con.
USB0
Port 16
SATA 0 & SATA1
COM1
IICH
Ports 2,3
One PCIe x8 or two PCIe x4
IMCH
PCIe x4
Dual GbE
Ports 4..11
SERDES
RJ45 w/
X’mr
FrontPanel
Clock Generator
Physical
Environment
Regulatory
Compliance
Dimensions
Temperature
Humidity
Vibration (5 ~ 500 Hz)
Shock
Altitude
Conformance
NEBS Level 3
Standards
DC/DC Converter
180.6 mm x 73.5 mm
Operating
Non-operating
-5 ~ 55° C (23 ~ 122° F)
-40 ~ 70° C (-40 ~ 140° F)
IEC60068-2-78 (95%RH @ 40° C)
IEC60068-2-6 ( 0.002G2/Hz, 1Grms)
IEC60068-2-27 (10G, 11ms)
300 m below sea level to 4,000 m above sea level
10,000 above sea level
UL94V0, FCC Class B, CE, RoHS & WEEE Ready
Designed for GR-63-CORE and GR-1089-CORE
PICMG AMC.0, AMC.1, AMC.2, AMC.3, IPMI v1.5, HPM.1
Ordering Information
Model Number
On-Board Option
CPU
Memory
Core 2 Duo LV 1.5 GHz (L7400)
1 GB DDR2 with ECC
Core 2 Duo LV 1.5 GHz (L7400)
2 GB DDR2 with ECC
Core 2 Duo ULV 1.06 GHz (U7500) 1 GB DDR2 with ECC
Core 2 Duo ULV 1.06 GHz (U7500) 2 GB DDR2 with ECC
MIC-5602A-M1E
MIC-5602A-M2E
MIC-5602B-M1E
MIC-5602B-M2E
Notes:
1. TPM support will be available as an option.
2. Full size front panel design will be available upon request.
3. CF module available as an option.
4. Low cost Celeron M ULV 1.06 GHz (423) on request.
5. MIC-5602A-M2E and MIC-5602B-M2E builds will depend on the availability of the
2 GB DDR2 SDRAM from the memory manufacturers. Check with your local Advantech
sales for further information.
Online Download www.advantech.com/products
Ports 0,1
Similar pages