MACOM MICROSMD050F-2 Specification status: released Datasheet

Tyco / Electronics
PolySwitch®
PTC Devices
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
Fax: 800-227-4866
Overcurrent Protection Device
PRODUCT: microSMD050F
DOCUMENT: SCD 25266
PCN: 049478, RF0403
REV LETTER: C
REV DATE: JANUARY 12, 2006
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Rating
Voltage: 13.2VDC
Current:
40A
Notes:
1. All terminations are tin plated.
2. Drawing not to scale
Marking:
TABLE I. DIMENSIONS:
A
mm:
in:
MIN
3.00
(0.118)
B
C
D
E
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
3.43
0.38
0.62
2.35
2.80
0.25
0.75
0.20
(0.135) (0.015) (0.025) (0.092) (0.110) (0.010) (0.030) (0.008)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
TIME TO
TRIP**
RESISTANCE
TRIPPEDVALUES
STATE POWER
DISSIPATION**
AMPERES
AMPERES
AMPERES SECONDS
OHMS
WATTS AT
AT 0°C
AT 20°C
AT 60°C
AT 20°C, 8A
AT 20°C
20°C, 13.2V
HOLD TRIP HOLD TRIP HOLD TRIP
MAX
MIN MAX*
MAX
0.58 1.16 0.50 1.00 0.35 0.70
0.05
0.25
0.90
0.8
*Maximum resistance is measured 1 hour after reflow.
** Values specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Agency Recognition:
Reference Documents:
Precedence:
Effectivity:
CAUTION:
UL, CSA, TÜV
PS300, E. N. SMD1.0x
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
© 2006 Tyco Electronics Corporation.
ELV Compliant
All rights reserved.
Pb-Free
Similar pages