ITT MIL5102B02NADF2X1K3025 1-4 pole miniature right Datasheet

C&K MIL Series
1-4 Pole Miniature Right
Typical Applications
• Telecom switching equipment
• Military communications
5 banks per switch
• Instrumentation
• Totally sealed (insert molded contacts • Medical monitors
Features/Benefits
• Bushing option for panel mounting
• 1 to 4 poles per bank and up to
and terminals)
• Low profile – 12 mm above PCB
Specifications
Materials
CONTACT RATING: Switch: 20 mA, 1 VA max. resistive load
Carry: 1 AMP.
ELECTRICAL LIFE: 20,000 operations.
OPERATING TORQUE: < 6 Ncm.
STOP STRENGTH: > 50 Ncm.
CONTACT RESISTANCE: < 40 mΩ
INSULATION RESISTANCE: 109 Ω
DIELECTRIC STRENGTH: 500 V rms
OPERATING TEMPERATURE: –40ºC to + 85ºC
STORAGE TEMPERATURE: –55ºC to + 85ºC
HOUSING: Thermoplastic (nylon) and thermoset (diallyl phthalate)
ACTUATOR: Steel
MOVABLE CONTACTS: Brass, gold plated.
ROTOR: Thermoset (polysulfone)
O-RING: Silicone
STATIONARY CONTACTS & TERMINALS: Brass, gold plated.
TERMINAL SEAL: Totally sealed (insert molded).
BUSHING: Brass
STOP PIN: Stainless steel
HARDWARE: Nut: Brass, nickel plated. Washer: Brass, nickel plated.
Gasket: Neopren.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages K-23 thru K-25. For additional options not shown in catalog, consult Customer Service Center.
Rotary
K
Designation
MIL
Number of Banks
1 (STD.) 1 Bank
2 2 Banks
Switch Function
3 3 Banks
112S
(STD.) SP, 30° Index, 12 pos. no stop
4 4 Banks
102B02 SP, 30° Index, 2 pos.
5 5 Banks
Switching Mode
103B03 SP, 30° Index, 3 pos.
N (STD.) Non-shorting BBM (break-before-make)
104B04 SP, 30° Index, 4 pos.
C Shorting, MBB (make-before-break)
105B05 SP, 30° Index, 5 pos.
106B06 SP, 30° Index, 6 pos.
Mounting Style
107B07 SP, 30° Index, 7 pos.
SD (STD.) Without panel mount
108B08 SP, 30° Index, 8 pos.
AD (STD.) With panel mount
109B09 SP, 30° Index, 9 pos.
Actuator Option
110B10 SP, 30° Index, 10 pos.
(NONE) (STD.) 4 mm diameter shaft
111B11 SP, 30° Index, 11 pos.
M10X3 4 mm shaft with flat
112B12 (STD.) SP, 30° Index, 12 pos.
F2X1
4 mm shaft with screwdriver slot
206S
(STD.) DP, 30° Index, 6 pos. no stop
Actuator Option Angle*
202B02 DP, 30° Index, 2 pos.
(NONE) (STD.)
203B03 DP, 30° Index, 3 pos.
K0
0° angle
204B04 DP, 30° Index, 4 pos.
K30 30° angle
205B05 DP, 30° Index, 5 pos.
K60 60° angle Actuator Option Length**
206B06 (STD.) DP, 30° Index, 6 pos.
K90 90° angle 25 (STD.) 25 mm standard shaft
303S
3P, 30° Index, 3 pos. no stop
302B02
303B03
402S
402B02
K120 120° angle
K180 180° angle
K270 270° angle
3P, 30° Index, 2 pos.
3P, 30° Index, 3 pos.
4P, 30° Index, 2 pos. no stop
4P, 30° Index, 2 pos.
* Other angles available by request
** Other lengths available by request.
Dimensions are shown: IN (mm)
Dimensions subject to change
K-22
www.ittcannon.com
C&K MIL Series
1-4 Pole Miniature Right
DESIGNATION
MIL
NUMBER OF BANKS
OPTION
CODE
DIM. ‘L’
WITH BUSHING
DIM. ‘L’
1
2
.770 (17,78)
.897 (22,78)
1.400 (35,56)
1.597 (40,56)
3
4
2.100 (53,34)
2.297 (58,34)
2.800 (71,12)
3.00 (76,12)
5
3.500 (88,90)
3.697 (93,90)
SWITCH FUNCTION
30º INDEXING
NO.
POLES
A
SWITCH
FUNCTION
112S
12 Position
No Stops
102B02
2 Positions
103B03
3 Positions
104B04
4 Positions
105B05
5 Positions
NO.
POLES
Pos. 11 21 31
Pos.
6 Positions
107B07
7 Positions
108B08
8 Positions
109B09
9 Positions
110B10
10 Positions
111B11
11 Positions
112B12
12 Positions
13 2 3 3 3
DP
DP MODELS SCHEMATIC
106B06
12 2 2 3 2
A1
4P MODELS SCHEMATIC
A2
A1
A2
A3
A4
3P
Pos. 11 21 31 41 51 61 12 22 32 42 52 62
Pos. 11 21
12 2 2
13 23
14 24
MODEL
NO.
SWITCH
FUNCTION
206S
4 Position
No Stops
202B02
2 Positions
203B03
3 Positions
204B04
4 Positions
205B05
5 Positions
206B06
6 Positions
303S
3 Positions
No Stop
302B02
2 Positions
303B03
3 Positions
402S
2 Positions
No Stop
402B02
2 Positions
4P
Third Angle
Projection
Dimensions are shown: IN (mm)
Dimensions subject to change
K-23
www.ittcannon.com
K
Rotary
SP
MODEL
NO.
30º INDEXING
3P MODELS SCHEMATIC
A1
A2
A3
SP MODELS SCHEMATIC
C&K MIL Series
1-4 Pole Miniature Right
SWITCHING MODE
N
C
(STD.) NON-SHORTING, BBM (break-before-make)
SHORTING, MBB (make-before-break)
MOUNTING STYLE
SD
AD
WITHOUT
WITH PANEL MOUNT
PANEL MOUNTING
Rotary
K
ACTUATOR OPTION
(NONE)
F2X1
(STD.) .157 DIA. (4,0)
SCREWCRIVER SLOT
.157 DIA.
(4,0)
.079
(2,0)
.039
(1,0)
M10X3
FLAT
.157 DIA.
(4,0)
Third Angle
Projection
Dimensions are shown: IN (mm)
Dimensions subject to change
K-24
www.ittcannon.com
C&K MIL Series
1-4 Pole Miniature Right
ACTUATOR OPTION ANGLE
(NONE)
K0
(STD.)
K30
(STD.) 0 ANGLE
K60
30º
K180
K120
60º
K90
210º
120º
K270
K0
90º
300º
K
(STD.) 0 ANGLE
Rotary
K30
K60
30º
K90
60º
90º
K120
120º
ACTUATOR LENGTH
25
0,25 mm (.984) STANDARD SHAFT
Other lengths available by request.
Dimensions are shown: IN (mm)
Dimensions subject to change
K-25
www.ittcannon.com
Similar pages