MKP 1839 Vishay Roederstein Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 MAIN APPLICATIONS: Dimensions in millimeters Pulse operations, deflection circuits in TV sets (S-correction), SMPS and thyristor circuits, storage, filter, timing and sample and hold circuits. MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture DIELECTRIC: Polypropylene film ELECTRODES: Ød L Max. 40.0 ± 5.0 d 0.6 0.8 1.0 D Max. 40.0 ± 5.0 D ≤ 9.0 < 16.5 ≥ 16.5 L ≤ 19.0 >26.5 ≥ 26.5 Vacuum deposited aluminum COATING: Plastic-wrapped, epoxy resin sealed TIME CONSTANT: CONSTRUCTION: Measured at 100 VDC for one minute For C > 0.33µF: Extended metallized film (refer to general information) 30,000 s minimum value LEADS: TEMPERATURE COEFFICIENT: Tinned wire - 250 x 10-6/°C (typical value) IEC TEST CLASSIFICATION: CAPACITANCE DRIFT: 55/100/56, according to IEC 60068 Up to + 40°C, < 0.5% for a period of two years OPERATING TEMPERATURE RANGE: DERATING FOR DC AND AC.CATEGORY VOLTAGE UC: - 55°C to + 100°C At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.7 UR CAPACITANCE RANGE: 1000pF to 10µF SELF INDUCTANCE: CAPACITANCE TOLERANCES: ~ 12 nH measured with 6mm long leads ± 10% (K), ± 5% (J), ± 2.5% (H), ± 1% (F) ± 1% only up to maximum body diameter of 14.5 x 31.5mm PULL TEST ON LEADS: ≥ 20 N in direction of leads according to IEC 60068-2-21 RATED VOLTAGES (UR): 160 VDC, 250 VDC, 400 VDC, 630 VDC BEND TEST ON LEADS: PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: 100 VAC, 160 VAC, 220 VAC, 250 VAC 2 bends through 90° with half of the force used in pull test DIELECTRIC ABSORPTION: 0.05% (typical value) according to IEC 60384-1 TEST VOLTAGE (ELECTRODE/ELECTRODE): 1.6 x UR for 2 s RELIABILITY: INSULATION RESISTANCE: Operational life > 300,000 h Failure rate < 5 FIT (40°C and 0.5 x UR) Measured at 100 VDC after one minute For C ≤ 0.33µF: For further details, please refer to the general information provided in this catalog. 100,000 MΩ minimum value MAXIMUM PULSE RISE TIME CAPACITOR LENGTH (mm) 11 14 19 26.5 31.5 41.5 Maximum pulse rise time dv/dt [V/µs] 160 VDC 240 175 100 60 45 30 250 VDC 300 220 125 75 60 40 400 VDC 515 380 200 120 95 65 630 VDC 700 510 280 160 120 85 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. www.vishay.com 68 For technical questions, contact [email protected] Document Number 26022 Revision 01-Dec-03 MKP 1839 Vishay Roederstein Metallized Polypropylene, Related Document: IEC 60384-16 DISSIPATION FACTOR TAN δ C ≤ 0.1µF 0.4 x 10-3 0.6 x 10-3 4 x 10-3 MEASURED AT 1kHz 10kHz 100kHz CAPACITANCE CAPACITANCE CODE 1000 1500 2200 3300 4700 6800 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 pF pF pF pF pF pF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF - 210 - 215 - 222 - 233 - 247 - 268 - 310 - 315 - 322 - 333 - 347 - 368 - 410 - 415 - 422 - 433 - 447 - 468 - 510 - 515 - 522 - 533 - 547 - 568 - 610 VOLTAGE CODE 16 160 VDC/ 100 VAC 0.1µF < C ≤ 1.0µF 0.4 x 10-3 0.6 x 10-3 — Maximum values VOLTAGE CODE 25 250 VDC/ 160 VAC C > 1.0µF 1 x 10-3 — — VOLTAGE CODE 40 400 VDC/ 220 VAC* VOLTAGE CODE 63 630 VDC/ 250 VAC* D L D L D L D L — — — — — — — — — 5.0 5.5 6.0 6.5 7.5 7.0 8.0 9.0 8.5 10.5 12.0 13.0 15.5 15.5 18.5 22.0 — — — — — — — — — 11.0 11.0 11.0 14.0 14.0 19.0 19.0 19.0 26.5 26.5 26.5 31.5 31.5 41.5 41.5 41.5 — — — — — — 5.0 5.0 5.0 5.5 6.0 6.5 7.5 7.0 8.5 8.0 9.0 11.0 12.5 13.0 16.0 19.0 19.5 23.0 — — — — — — — 11.0 11.0 11.0 11.0 14.0 14.0 14.0 19.0 19.0 26.5 26.5 26.5 26.5 31.5 31.5 31.5 41.5 41.5 — — — — — — 5.0 5.5 6.0 6.5 7.0 8.0 8.5 9.0 8.0 9.5 11.5 13.5 14.0 17.0 20.5 21.0 — — — — — — — — — 11.0 11.0 11.0 14.0 14.0 14.0 19.0 19.0 26.5 26.5 26.5 26.5 31.5 31.5 31.5 41.5 — — — — 5.0 5.0 5.0 5.0 5.0 5.5 5.5 6.5 7.5 7.0 8.0 9.0 8.5 10.5 12.0 14.5 15.0 18.0 18.0 22.0 — — — — — 11.0 11.0 11.0 11.0 11.0 11.0 14.0 14.0 14.0 19.0 19.0 19.0 26.5 26.5 26.5 26.5 31.5 31.5 41.5 41.5 — — — — — Further C-values upon request PCM = L + 3.5mm *Not suitable for mains applications. Please refer to X-capacitors in our catalog “RFI Suppression Components”. RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLE G AMMO — MKP 1839-422-403-G X R REEL 350 MKP 1839-422-403-R X — BULK for L > 31.5mm — MKP 1839-522-403 X Document Number 26022 Revision 01-Dec-03 For technical questions, contact [email protected] www.vishay.com 69 MKP 1839 100 7 5 0. 04 7 Capacitance in µF 0. 3 2 1 0. 10 6. 8 4. 2. 7 1000 7 5 Capacitance in µF 3 2 22 0. 10 7 5 V RMS V RMS Vishay Roederstein Metallized Polypropylene, Related Document: IEC 60384-16 1. 2 0. 47 01 100 7 5 0 3 2 0. 02 6. 8 3 2 160 VDC 4. 7 2. 1. 2 0 2 0. 04 0. 47 7 0. 0. 22 1 250 VDC 1 10 103 2 3 5 7 104 2 3 7 105 5 2 3 5 7 106 103 2 3 5 7 104 2 3 5 7 105 2 5 7 106 3 f [Hz] Capacitance in µF 3 2 01 0. 02 2. 2 0 04 0. 47 3 2 Capacitance in pF and µF 0. 22 1. 5 100 7 5 2 0. 1. 1000 7 5 3 2 0. 100 7 5 V RMS V RMS 1000 7 5 f [Hz] Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency 7 10 00 1. 0 0. 47 22 00 0. 22 0. 1 0. 04 7 3 2 0. 1 47 00 0. 02 2 0. 01 630 VDC 400 VDC 10 10 103 2 3 5 7 104 2 3 5 7 105 2 3 5 7 106 103 2 3 5 7 104 2 3 5 7 105 www.vishay.com 70 3 5 7 106 f [Hz] f [Hz] Permissible AC Voltage versus Frequency 2 Permissible AC Voltage versus Frequency For technical questions, contact [email protected] Document Number 26022 Revision 01-Dec-03