Microsemi MLL1.4KESD100A Surface mount tv Datasheet

MLL1.4KESD5.0 thru MLL1.4KESD170CA
SURFACE MOUNT TVS
SCOTTSDALE DIVISION
APPEARANCE
These small surface mount TVS devices feature the ability to clamp
dangerous high voltage short-term transients such as produced by directed
or radiated electrostatic discharge phenomena before entering sensitive
component regions of a circuit design. They are small economical transient
voltage suppressors targeted primarily for short-term transients below a few
microseconds while still achieving significant peak-pulse-power capability
as illustrated in Figure #1.
DO-213AA
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
APPLICATIONS / BENEFITS
• Excellent protection in clamping direct ESD level
transients in excess of 15,000 V per MIL-STD-750,
Method 1020 (approx. 150 ns exponential wave)
• Absorbs ESD level transients* of 1400 Watts per
MIL-STD-750, Method 1020 (approx. 150 ns
exponential wave, or one microsecond transients up
to 400 watts. See Figure #1 and #2 for overall
transient Peak Pulse Power.
• Clamps Transients in less than 100 picoseconds
• Working Stand-off Voltage range of 5 V to 170 V
• Hermetic DO-213AA Package. Also available in
axial-leaded DO-35 package (see separate data
sheet for 1.4KESD5.0 series)
• Protects Sensitive circuits from short duration fast
rise time transients such as Electrostatic Discharge
(ESD) or Electrical Fast Transients (EFT)
• Low inherent capacitance for high-frequency
applications (See Figure #4)
• Small surface mount foot print
• Bidirectional features available by adding a “C” or
“CA” suffix
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
• 400 Watts for One Microsecond Square Wave or
1400 watts per ESD Wave form of MIL-STD-750,
method 1020
• See Surge Rating curves in Figures #1, 2 and 3
• Operating and storage temperature –65oC to 175oC
• THERMAL RESISTANCE: 150oC/W junction to end
cap
• DC power dissipation 500 mW at TEC ≤ 100oC
• Derate at 2.3 W/oC above 25oC for PPP (1µs) and at
o
o
6.67 mW/ C above 100 C for dc power
• Forward Surge Current 50 amps for 1µs at TL = 25oC
(rise time > 100 ns)
• CASE: Hermetically sealed glass DO-213AA surface
mount package
• TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, method 2026
• POLARITY: Banded end is cathode
• WEIGHT: 0.04 grams (typical)
• MARKING: Cathode band only
• TAPE & REEL option: Standard per EIA-481-B (add
“TR” suffix to part number)
• See package dimension on last page
Copyright  2003
10-06-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
1.4KESD5.0 – 1.4KESD170A
FEATURES
WWW . Microsemi .C OM
DESCRIPTION
MLL1.4KESD5.0 thru MLL1.4KESD170CA
SURFACE MOUNT TVS
SCOTTSDALE DIVISION
TYPE
NUMBER*
Copyright  2003
10-06-2003 REV A
BREAKDOWN
VOLTAGE
VBR
MINIMUM
V(BR)
BREAKDOWN
CURRENT
I(BR)
VOLTS
VOLTS
5.0
5.0
6.0
6.0
6.5
6.5
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
9.0
9.0
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
20
20
22
22
24
24
26
26
28
28
30
30
33
33
36
36
40
40
43
43
45
45
48
48
51
51
6.40
6.40
6.67
6.67
7.22
7.22
7.78
7.78
8.33
8.33
8.89
8.89
9.44
9.44
10.0
10.0
11.1
11.1
12.2
12.2
13.3
13.3
14.4
14.4
15.6
15.6
16.7
16.7
17.8
17.8
18.9
18.9
20.0
20.0
22.2
22.2
24.4
24.4
26.7
26.7
28.9
28.9
31.1
31.1
33.3
33.3
36.7
36. 7
40.0
40.0
44.4
44.4
47.8
47.8
50.0
50.0
53.3
53.3
56.7
56.7
MAXIMUM
STANDBY
CURRENT
ID @ VWM
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
PEAK
PULSE
CURRENT
IPP**
mA
µA
VOLTS
AMPS
10
10
10
10
10
10
10
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
600
600
600
600
400
400
150
150
50
50
25
25
5
5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
13.7
13.2
14.8
14.0
16.0
15.2
17.3
16.4
18.5
17.5
19.8
18.7
20.9
19.8
22.2
21.1
24.7
23.4
27.1
25.7
29.6
28.0
32.0
30.3
31.2
29.5
33.4
31.7
35.6
33.8
37.8
35.8
40.0
37.9
44.4
42.0
48.8
46.2
53.4
50.6
57.8
54.7
62.2
59.0
66.6
63.1
73.4
69.6
80.0
75.8
88.8
84.2
95.6
90.5
100.0
94.8
106.6
101.0
113.4
107.5
29.20
29.85
27.00
28.50
24.94
26.32
23.12
24.42
21.57
22.81
20.20
21.37
19.10
20.16
18.02
18.96
16.19
17.09
14.76
15.56
13.51
14.29
12.50
13.20
12.81
13.60
11.98
12.63
11.22
11.85
10.58
11.17
10.00
10.56
9.02
9.52
8.20
8.66
7.49
7.91
6.93
7.31
6.43
6.79
6.01
6.34
5.45
5.75
5.00
5.28
4.50
4.75
4.18
4.42
4.00
4.22
3.75
3.96
3.53
3.72
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
1.4KESD5.0 – 1.4KESD170A
MLL1.4KESD5.0
MLL1.4KESD5.0A
MLL1.4KESD6.0
MLL1.4KESD6.0A
MLL1.4KESD6.5
MLL1.4KESD6.5A
MLL1.4KESD7.0
MLL1.4KESD7.0A
MLL1.4KESD7.5
MLL1.4KESD7.5A
MLL1.4KESD8.0
MLL1.4KESD8.0A
MLL1.4KESD8.5
MLL1.4KESD8.5A
MLL1.4KESD9.0
MLL1.4KESD9.0A
MLL1.4KESD10
MLL1.4KESD10A
MLL1.4KESD11
MLL1.4KESD11A
MLL1.4KESD12
MLL1.4KESD12A
MLL1.4KESD13
MLL1.4KESD13A
MLL1.4KESD14
MLL1.4KESD14A
MLL1.4KESD15
MLL1.4KESD15A
MLL1.4KESD16
MLL1.4KESD16A
MLL1.4KESD17
MLL1.4KESD17A
MLL1.4KESD18
MLL1.4KESD18A
MLL1.4KESD20
MLL1.4KESD20A
MLL1.4KESD22
MLL1.4KESD22A
MLL1.4KESD24
MLL1.4KESD24A
MLL1.4KESD26
MLL1.4KESD26A
MLL1.4KESD28
MLL1.4KESD28A
MLL1.4KESD30
MLL1.4KESD30A
MLL1.4KESD33
MLL1.4KESD33A
MLL1.4KESD36
MLL1.4KESD36A
MLL1.4KESD40
MLL1.4KESD40A
MLL1.4KESD43
MLL1.4KESD43A
MLL1.4KESD45
MLL1.4KESD45A
MLL1.4KESD48
MLL1.4KESD48A
MLL1.4KESD51
MLL1.4KESD51A
REVERSE
STAND-OFF
VOLTAGE
VWM
WWW . Microsemi .C OM
ELECTRICAL CHARACTERISTICS
MLL1.4KESD5.0 thru MLL1.4KESD170CA
SURFACE MOUNT TVS
SCOTTSDALE DIVISION
MLL1.4KESD54
MLL1.4KESD54A
MLL1.4KESD58
MLL1.4KESD58A
MLL1.4KESD60
MLL1.4KESD60A
MLL1.4KESD64
MLL1.4KESD64A
MLL1.4KESD70
MLL1.4KESD70A
MLL1.4KESD75
MLL1.4KESD75A
MLL1.4KESD78
MLL1.4KESD78A
MLL1.4KESD85
MLL1.4KESD85A
MLL1.4KESD90
MLL1.4KESD90A
MLL1.4KESD100
MLL1.4KESD100A
MLL1.4KESD110
MLL1.4KESD110A
MLL1.4KESD120
MLL1.4KESD120A
MLL1.4KESD130
MLL1.4KESD130A
MLL1.4KESD150
MLL1.4KESD150A
MLL1.4KESD160
MLL1.4KESD160A
MLL1.4KESD170
MLL1.4KESD170A
BREAKDOWN
VOLTAGE
VBR
MINIMUM
V(BR)
BREAKDOWN
CURRENT
I(BR)
MAXIMUM
STANDBY
CURRENT
ID @ VWM
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
PEAK
PULSE
CURRENT
IPP**
VOLTS
VOLTS
mA
µA
VOLTS
AMPS
54
54
58
58
60
60
64
64
70
70
75
75
78
78
85
85
90
90
100
100
110
110
120
120
130
130
150
150
160
160
170
170
60.0
60.0
64.4
64.4
66.7
66.7
71.1
71.1
77.8
77.8
83.3
83.3
86.7
86.7
94.4
94.4
100.0
100.0
111.0
111.0
122.0
122.0
133.0
133.0
144.0
144.0
167.0
167.0
178.0
178.0
189.0
189.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
120.0
113.7
128.9
122.0
133.4
126.4
142.2
134.7
155.6
147.4
166.8
158.0
173.4
164.3
188.5
178.6
199.8
189.9
222.3
210.6
243.9
213.3
266.4
252.0
288.0
273.0
333.9
316.8
356.4
337.5
378.0
358.2
3.33
3.52
3.10
3.28
3.00
3.17
2.81
2.97
2.57
2.71
2.40
2.53
2.31
2.44
2.12
2.24
2.00
2.11
1.80
1.90
1.64
1.73
1.50
1.59
1.39
1.47
1.20
1.26
1.12
1.19
1.06
1.12
WWW . Microsemi .C OM
TYPE NUMBER*
REVERSE
STAND-OFF
VOLTAGE
VWM
•
For bidirectional, add a “C” or “CA” suffix after the part number, e.g. MLL1.4KESD5.0C or MLL1.4KESD5.0CA for MLL1.4KESD5.0 or
MLL1.4KESD5.0A part numbers respectively. Capacitance will be one-half that shown in Figure 4 at zero volts.
** At 400 watts 1µs square wave rating (See Figures 1 and 2).
tp – Pulse Time
FIGURE 1
Peak Pulse Power vs. Pulse Width
1.4KESD5.0 – 1.4KESD170A
PPP – Peak Pulse Power
OUTLINE AND CIRCUIT
FIGURE 2
(*Exponential Wave Form Pulse Width to 50% Decay of Peak.)
Copyright  2003
10-06-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3
MLL1.4KESD5.0 thru MLL1.4KESD170CA
SURFACE MOUNT TVS
SCOTTSDALE DIVISION
Clamping Factor VC/V(BR)
WWW . Microsemi .C OM
Breakdown Voltage V(BR) in Volts
FIGURE 3
Clamping Factor vs. Breakdown Voltage for Various Power Levels
FIGURE 4
Capacitance vs. V(BR) for unidirectional.
For Bidirectional, value is one-half that
shown at zero volts.
PACKAGE DIMENSIONS & PAD LAYOUT
DIM
A
B
C
INCHES
MIN
MAX
0.063
0.067
0.130
0.146
0.016
0.022
MILLIMETERS
MIN
MAX
1.60
1.70
3.30
3.70
0.41
0.55
PAD LAYOUT
A
B
C
INCHES
.200
.055
.080
mm
5.08
1.40
2.03
1.4KESD5.0 – 1.4KESD170A
Copyright  2003
10-06-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 4
Similar pages