Microsemi MLL4106D Glass surface mount 0.5 watt zener Datasheet

1N4099UR thru 1N4135UR
(or MLL4099 thru MLL4135)
and
1N4614UR thru 1N4627UR
(or MLL4614 thru MLL4627)
SCOTTSDALE DIVISION
GLASS SURFACE MOUNT 0.5 WATT
ZENERS
APPEARANCE
The 1N4099UR thru 1N4135UR and 1N4614UR thru 1N4627UR series of
0.5 watt glass surface mount DO-213AA Zener voltage regulators provides
a selection from 1.8 to 100 volts in standard 5% tolerances as well as
tighter tolerances identified by different suffix letters on the part number.
These are also available with an internal-metallurgical-bond option by
adding a “-1” suffix (see separate data sheet) including JAN, JANTX, and
JANTXV military qualifications. Microsemi also offers numerous other
Zener products to meet higher and lower power applications.
DO-213AA
WWW . Microsemi .C OM
DESCRIPTION
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
• Surface mount equivalent to JEDEC registered 1N4099
thru 1N4135 and 1N4614 thru 1N4627 series
• Internal metallurgical bond option available by adding a
“-1” suffix that also includes JAN, JANTX, and JANTXV
qualifications per MIL-PRF-19500/435 (see separate
data sheet for same part numbers with “-1” suffix)
• DO-7 or DO-35 glass body axial-leaded Zener
equivalents also available per JEDEC registration (see
separate data sheet for part numbers 1N4099 thru
1N4135 and 1N4614 thru 1N4627 series
MAXIMUM RATINGS
•
•
•
•
•
•
•
Regulates voltage over a broad operating current and
temperature range
Extensive selection from 1.8 to 100 V
Standard voltage tolerances are plus/minus 5% with
no suffix
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
Hermetically sealed surface mount package
Nonsensitive to ESD per MIL-STD-750 Method 1020
Minimal capacitance (see Figure 3)
Inherently radiation hard as described in Microsemi
MicroNote 050
MECHANICAL AND PACKAGING
º
º
• CASE: Hermetically sealed glass DO-213AA (SOD80
or MLL34) MELF style package
• TERMINALS: End caps tin-lead plated solderable per
MIL-STD-750, method 2026
• POLARITY: Cathode indicated by band where diode
is to be operated with the banded end positive with
respect to the opposite end for Zener regulation
• MARKING: cathode band only
• TAPE & REEL option: Standard per EIA-481-1-A with
12 mm tape, 2000 per 7 inch reel or 5000 per 13 inch
reel (add “TR” suffix to part number)
• WEIGHT: 0.04 grams
• See package dimensions on last page
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
1N4099UR–1N4135UR
1N4614UR – 1N4627UR
• Operating and Storage temperature: -65 C to +175 C
• Thermal Resistance: 150ºC/W junction to end cap and
300ºC/W junction to ambient when mounted on FR4 PC
board (1 oz Cu) with recommended footprint (see last
page)
• Steady-State Power: 0.5 watts at end cap temperature
TEC < 100oC or ambient temperature TA < 25ºC when
mounted on FR4 PC board as described for thermal
resistance above (see Figure 2 for derating)
• Forward voltage @200 mA: 1.1 volts
• Solder Temperatures: 260 ºC for 10 s (max)
Copyright  2002
11-05-03 REV C
•
1N4099UR thru 1N4135UR
(or MLL4099 thru MLL4135)
and
1N4614UR thru 1N4627UR
(or MLL4614 thru MLL4627)
SCOTTSDALE DIVISION
INDUSTRY
PART NUMBER
MICROSEMI
PART
NUMBER
NOMINAL
ZENER
VOLTAGE
ZENER
TEST
CURRENT
VZ @ IZT
IZT
(NOTE 2)
MAXIMUM
ZENER
IMPEDANCE
MAXIMUM
REVERSE
CURRENT
MAXIMUM
NOISE
DENSITY
MAXIMUM
ZENER
CURRENT
ZZT
IR @ VR
ND @ IZT
IZM
(Note 3)
TYPICAL
TEMP.COEFF.
OF ZENER
VOLTAGE
αVZ
o
(NOTE 1)
o
tolerance with suffix C and D respectively. VZ is measured with the diode in thermal equilibrium (still air) at 25 C for end-cap terminations.
NOTE 3: The zener impedance is derived by superimposing on IZT, a 60 Hz rms ac current equal to 10% of IZT (25µA). See MicroNote 202 for
zener impedance variation with different operating currents.
Copyright  2002
11-05-03 REV C
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
1N4099UR–1N4135UR
1N4614UR – 1N4627UR
VOLTS
OHMS
Volts
mA
%/ C
µA
µA
µV/√Hz
1N4614UR
MLL4614
1.8
250
1200
3.5
1.0
1
120
-0.075
1N4615UR
MLL4615
2.0
250
1250
2.5
1.0
1
110
-0.075
1N4616UR
MLL4616
2.2
250
1300
2.0
1.0
1
100
-0.075
1N4617UR
MLL4617
2.4
250
1400
1.0
1.0
1
95
-0.075
1N4618UR
MLL4618
2.7
250
1500
0.5
1.0
1
90
-0.075
1N4619UR
MLL4619
3.0
250
1600
0.4
1.0
1
87
-0.075
1N4620UR
MLL4620
3.3
250
1650
3.5
1.5
1
85
-0.075
1N4621UR
MLL4621
3.6
250
1700
3.5
2.0
1
83
-0.065
1N4622UR
MLL4622
3.9
250
1650
2.5
2.0
1
80
-0.060
1N4623UR
MLL4623
4.3
250
1600
2.0
2.0
1
77
-0.050
1N4624UR
MLL4624
4.7
250
1550
5.0
3.0
1
75
-0.040,+0.020
1N4625UR
MLL4625
5.1
250
1500
5.0
3.0
2
70
-0.045,+0.030
1N4626UR
MLL4626
5.6
250
1400
5.0
4.0
4
65
-0.020,+0.040
1N4627UR
MLL4627
6.2
250
1200
5.0
5.0
5
61
-0.010,+0.050
1N4099UR
MLL4099
6.8
250
200
1.0
5.17
40
56
0.040
1N4100UR
MLL4100
7.5
250
200
1.0
5.70
40
51
0.045
1N4101UR
MLL4101
8.2
250
200
0.5
6.24
40
46
0.048
1N4102UR
MLL4102
8.7
250
200
0.5
6.61
40
44
0.049
1N4103UR
MLL4103
9.1
250
200
0.5
6.92
40
42
0.050
1N4104UR
MLL4104
10
250
200
0.5
7.60
40
38
0.055
1N4105UR
MLL4105
11
250
200
.05
8.44
40
35
0.060
1N4106UR
MLL4106
12
250
200
.05
9.12
40
32
0.065
1N4107UR
MLL4107
13
250
200
.05
9.87
40
29
0.065
1N4108UR
MLL4108
14
250
200
.05
10.65
40
27
0.070
1N4109UR
MLL4109
15
250
100
.05
11.40
40
25
0.070
1N4110UR
MLL4110
16
250
100
.05
12.15
40
24
0.070
1N4111UR
MLL4111
17
250
100
.05
12.92
40
22
0.075
1N4112UR
MLL4112
18
250
100
.05
13.67
40
21
0.075
1N4113UR
MLL4113
19
250
150
.05
14.44
40
20
0.075
1N4114UR
MLL4114
20
250
150
.01
15.20
40
19
0.075
1N4115UR
MLL4115
22
250
150
.01
16.72
40
17
0.080
1N4116UR
MLL4116
24
250
150
.01
18.25
40
16
0.080
1N4117UR
MLL4117
25
250
150
.01
1900
40
15
0.080
1N4118UR
MLL4118
27
250
150
.01
20.45
40
14
0.085
1N4119UR
MLL4119
28
250
200
.01
21.28
40
14
0.085
1N4120UR
MLL4120
30
250
200
.01
22.80
40
13
0.085
1N4121UR
MLL4121
33
250
200
.01
25.08
40
12
0.085
1N4122UR
MLL4122
36
250
200
.01
27.38
40
11
0.090
1N4123UR
MLL4123
39
250
200
.01
29.65
40
9.8
0.090
1N4124UR
MLL4124
43
250
250
.01
32.65
40
8.9
0.090
1N4125UR
MLL4125
47
250
250
.01
35.75
40
8.1
0.090
1N4126UR
MLL4126
51
250
300
.01
38.76
40
7.5
0.090
1N4127UR
MLL4127
56
250
300
.01
42.60
40
6.7
0.090
1N4128UR
MLL4128
60
250
400
.01
45.60
40
6.4
0.090
1N4129UR
MLL4129
62
250
500
.01
47.10
40
6.1
0.090
1N4130UR
MLL4130
68
250
700
.01
51.68
40
5.6
0.095
1N4131UR
MLL4131
75
250
700
.01
57.00
40
5.1
0.095
1N4132UR
MLL4132
82
250
800
.01
62.32
40
4.6
0.095
1N4133UR
MLL4133
87
250
1000
.01
66.12
40
4.4
0.095
1N4134UR
MLL4134
91
250
1200
.01
69.16
40
4.2
0.095
1N4135UR
MLL4135
100
250
1500
.01
76.00
40
3.8
0.095
NOTE 1: These may be ordered as either 1N4614UR-1N4627UR, 1N4099UR-1N4135UR or as the MLL4614-MLL4627, MLL4099-MLL4135.
NOTE 2: The JEDEC type numbers shown above have a standard tolerance of +/-5% for nominal Zener voltage and are also available in 2% and 1%
(NOTE 1)
WWW . Microsemi .C OM
*ELECTRICAL CHARACTERISTICS @ 25oC
1N4099UR thru 1N4135UR
(or MLL4099 thru MLL4135)
and
1N4614UR thru 1N4627UR
(or MLL4614 thru MLL4627)
SCOTTSDALE DIVISION
Pd Rated Power Dissipation (mW)
WWW . Microsemi .C OM
GRAPHS and CIRCUIT
TEC
TA
o
TEC, End Cap Temperature ( C) or TA
Ambient temperature on FR4 PC board
FIGURE 2 Power Derating Curve
Capacitance vs. VZ Curve
Typical Capacitance in Picofarads (pf)
FIGURE 1 Noise Density Measurement Circuit
Noise density, (ND) is specified in microvolt-rms per squreroot-hertz. Actual measurement is performed using a 1 KHz
to 3 KHz frequency bandpass filter at a constant Zener test
o
current (IZT) AT 25 C ambient temperature. ND is calculated
from the formula.
FIGURE 3 Capacitance vs. Zener Voltage (Typical)
Zener Voltage VZ
DIM
A
B
C
INCHES
MIN
MAX
0.063
0.067
0.130
0.146
0.016
0.022
MILLIMETERS
MIN
MAX
1.60
1.70
3.30
3.70
0.41
0.55
PAD LAYOUT
A
B
C
Copyright  2002
11-05-03 REV C
1N4099UR–1N4135UR
1N4614UR – 1N4627UR
PACKAGE DIMENSIONS
INCHES
.200
.055
.080
mm
5.08
1.40
2.03
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3
Similar pages