Fairchild MM74HC32N NL Quad 2-input or gate Datasheet

Revised January 2005
MM74HC32
Quad 2-Input OR Gate
General Description
Features
The MM74HC32 OR gates utilize advanced silicon-gate
CMOS technology to achieve operating speeds similar to
LS-TTL gates with the low power consumption of standard
CMOS integrated circuits. All gates have buffered outputs
providing high noise immunity and the ability to drive 10
LS-TTL loads. The 74HC logic family is functionally as well
as pin-out compatible with the standard 74LS logic family.
All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
■ Typical propagation delay: 10 ns
■ Wide power supply range: 2–6V
■ Low quiescent current: 20 µA maximum (74HC Series)
■ Low input current: 1 µA maximum
■ Fanout of 10 LS-TTL loads
Ordering Code:
Order Number
Package
Package Description
Number
MM74HC32M
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
MM74HC32MX_NL
M14A
Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
MM74HC32SJ
M14D
Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MM74HC32MTC
MTC14
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HC32MTCX_NL
MTC14
Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
MM74HC32N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
MM74HC32N_NL
N14A
Pb-Free 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Pb-Free package per JEDEC J-STD-020B.
Connection Diagram
Logic Diagram
Pin Assignments for DIP, SOIC, SOP and TSSOP
Y=A+B
(1 of 4)
Top View
© 2005 Fairchild Semiconductor Corporation
DS005132
www.fairchildsemi.com
MM74HC32 Quad 2-Input OR Gate
September 1983
MM74HC32
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions
(Note 2)
−0.5 to + 7.0V
Supply Voltage (VCC)
−1.5 to VCC + 1.5V Supply Voltage (V )
CC
−0.5 to VCC + 0.5V DC Input or Output Voltage
DC Input Voltage (VIN)
DC Output Voltage (VOUT)
±20 mA
Clamp Diode Current (IIK, IOK)
DC VCC or GND Current, per pin
(ICC)
Storage Temperature Range (TSTG)
−65°C to +150°C
Power Dissipation (PD)
(Note 3)
600 mW
S.O. Package only
500 mW
Symbol
VIH
VIL
VOH
Parameter
V
0
VCC
V
−40
+85
°C
(tr, tf) VCC = 2.0V
1000
ns
VCC = 4.5V
500
ns
VCC = 6.0V
400
ns
Note 2: Unless otherwise specified all voltages are referenced to ground.
260°C
DC Electrical Characteristics
Units
6
Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur.
Lead Temperature (TL)
(Soldering 10 seconds)
Max
2
(VIN, VOUT )
±25 mA Operating Temperature Range (T )
A
±50 mA Input Rise or Fall Times
DC Output Current, per pin (IOUT)
Min
Note 3: Power Dissipation temperature derating — plastic “N” package: −
12 mW/°C from 65°C to 85°C.
(Note 4)
VCC
Conditions
TA = 25°C
Typ
TA = −40 to 85°C
Guaranteed Limits
Units
Minimum HIGH Level
2.0V
1.5
1.5
V
Input Voltage
4.5V
3.15
3.15
V
6.0V
4.2
4.2
V
Maximum LOW Level
2.0V
0.5
0.5
V
Input Voltage
4.5V
1.35
1.35
V
6.0V
1.8
1.8
V
Minimum HIGH Level
VIN = VIH or VIL
Output Voltage
|IOUT | ≤ 20 µA
2.0V
2.0
1.9
1.9
V
4.5V
4.5
4.4
4.4
V
6.0V
6.0
5.9
5.9
V
| IOUT | ≤ 4.0 mA
4.5V
4.7
3.98
3.84
V
| IOUT | ≤ 5.2 mA
6.0V
5.2
5.48
5.34
V
VIN = VIH or VIL
VOL
Maximum LOW Level
VIN = VIL
Output Voltage
|IOUT | ≤ 20 µA
2.0V
0
0.1
0.1
V
4.5V
0
0.1
0.1
V
6.0V
0
0.1
0.1
V
| IOUT | ≤ 4.0 mA
4.5V
0.2
0.26
0.33
V
| IOUT | ≤ 5.2 mA
6.0V
0.2
0.26
0.33
V
VIN = VCC or GND
6.0V
±0.1
±1.0
µA
Maximum Quiescent
VIN = VCC or GND
6.0V
2.0
20
µA
Supply Current
IOUT = 0 µA
VIN = VIL
IIN
Maximum Input
Current
ICC
Note 4: For a power supply of 5V ±10% the worst case output voltages (VOH, and VOL) occur for HC at 4.5V. Thus the 4.5V values should be used when
designing with this supply. Worst case VIH and VIL occur at VCC = 5.5V and 4.5V respectively. (The VIH value at 5.5V is 3.85V.) The worst case leakage current (IIN, ICC, and IOZ) occur for CMOS at the higher voltage and so the 6.0V values should be used.
www.fairchildsemi.com
2
VCC = 5V, TA = 25°C, CL = 15 pF, tr = tf = 6 ns
Symbol
tPHL, tPLH
Parameter
Conditions
Guaranteed
Typ
Maximum Propagation
Limit
10
18
Units
ns
Delay
AC Electrical Characteristics
VCC = 2.0V to 6.0V, CL = 50 pF, tr = tf = 6 ns (unless otherwise specified)
VCC
TA = −40 to 85°C
Units
Parameter
tPHL, tPLH
Maximum Propagation
2.0V
30
100
125
ns
Delay
4.5V
12
20
25
ns
6.0V
9
17
21
ns
Maximum Output Rise
2.0V
30
75
95
ns
and Fall Time
4.5V
8
15
19
ns
7
13
16
tTLH, tTHL
Conditions
TA = 25°C
Symbol
6.0V
CPD
Power Dissipation
(per gate)
Typ
Guaranteed Limits
50
ns
pF
Capacitance (Note 5)
CIN
Maximum Input
5
10
10
pF
Capacitance
Note 5: CPD determines the no load dynamic power consumption, PD = CPD VCC2f + ICC VCC, and the no load dynamic current consumption,
IS = CPD VCC f + ICC.
3
www.fairchildsemi.com
MM74HC32
AC Electrical Characteristics
MM74HC32
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A
www.fairchildsemi.com
4
MM74HC32
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M14D
5
www.fairchildsemi.com
MM74HC32
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC14
www.fairchildsemi.com
6
MM74HC32 Quad 2-Input OR Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com
Similar pages