Fairchild MM74HC4052M 8-channel analog multiplexer . dual 4-channel analog multiplexer . triple 2-channel analog multiplexer Datasheet

Revised May 1999
MM74HC4051 • MM74HC4052 • MM74HC4053
8-Channel Analog Multiplexer •
Dual 4-Channel Analog Multiplexer •
Triple 2-Channel Analog Multiplexer
General Description
The MM74HC4051, MM74HC4052 and MM74HC4053
multiplexers are digitally controlled analog switches implemented in advanced silicon-gate CMOS technology. These
switches have low “on” resistance and low “off” leakages.
They are bidirectional switches, thus any analog input may
be used as an output and vice-versa. Also these switches
contain linearization circuitry which lowers the on resistance and increases switch linearity. These devices allow
control of up to ±6V (peak) analog signals with digital control signals of 0 to 6V. Three supply pins are provided for
VCC, ground, and VEE. This enables the connection of 0–
5V logic signals when VCC = 5V and an analog input range
of ±5V when VEE = 5V. All three devices also have an
inhibit control which when HIGH will disable all switches to
their off state. All analog inputs and outputs and digital
inputs are protected from electrostatic damage by diodes
to VCC and ground.
MM74HC4051: This device connects together the outputs
of 8 switches, thus achieving an 8 channel Multiplexer. The
binary code placed on the A, B, and C select lines determines which one of the eight switches is “on”, and connects one of the eight inputs to the common output.
MM74HC4052: This device connects together the outputs
of 4 switches in two sets, thus achieving a pair of 4-channel
multiplexers. The binary code placed on the A, and B
select lines determine which switch in each 4 channel section is “on”, connecting one of the four inputs in each section to its common output. This enables the implementation
of a 4-channel differential multiplexer.
MM74HC4053: This device contains 6 switches whose outputs are connected together in pairs, thus implementing a
triple 2 channel multiplexer, or the equivalent of 3 singlepole-double throw configurations. Each of the A, B, or C
select lines independently controls one pair of switches,
selecting one of the two switches to be “on”.
Features
■ Wide analog input voltage range: ±6V
■ Low “on” resistance:
50 typ. (VCC–VEE = 4.5V)
30 typ. (VCC–VEE = 9V)
■ Logic level translation to enable 5V logic with ±5V analog signals
■ Low quiescent current: 80 µA maximum (74HC)
■ Matched Switch characteristic
Ordering Code:
Order Number
MM74HC4051M
Package Number
Package Description
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
MM74HC4051WM
M16B
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide
MM74HC4051SJ
M16D
MM74HC4051MTC
MTC16
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HC4051N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-0010.300” Wide
MM74HC4052M
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
MM74HC4052WM
M16B
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide
MM74HC4052SJ
M16D
MM74HC4052MTC
MTC16
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HC4052N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-0010.300” Wide
MM74HC4053M
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
MM74HC4053WM
M16B
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide
MM74HC4053SJ
M16D
MM74HC4053MTC
MM74HC4053N
MTC16
N16E
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-0010.300” Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
© 1999 Fairchild Semiconductor Corporation
DS005353.prf
www.fairchildsemi.com
MM74HC4051 • MM74HC4052 • MM74HC4053 8-Channel Analog Multiplexer •
August 1984
MM74HC4051 • MM74HC4052 • MM74HC4053
Connection Diagrams
Truth Tables
Pin Assignments for DIP, SOIC, SOP and TSSOP
MM744051
Input
“ON”
Inh
C
B
A
Channel
H
X
X
X
None
L
L
L
L
Y0
L
L
L
H
Y1
L
L
H
L
Y2
L
L
H
H
Y3
L
H
L
L
Y4
L
H
L
H
Y5
L
H
H
L
Y6
L
H
H
H
Y7
Top View
MM744052
Inputs
“ON” Channels
Inh
B
A
X
Y
H
X
X
None
None
L
L
L
0X
0Y
L
L
H
1X
1Y
L
H
L
2X
2Y
L
H
H
3X
3Y
Top View
MM744053
Input
“ON” Channels
Inh C B A
H
Top View
www.fairchildsemi.com
2
C
b
a
X X X None None None
L
L
L
L
CX
BX
L
L
L H
CX
BX
AY
L
L H L
CX
BY
AX
L
L H H
CX
BY
AY
L
H L
CY
BX
AX
L
H L H
CY
BX
AY
L
H H L
CY
BY
AX
L
H H H
CY
BY
AY
L
AX
MM74HC4051 • MM74HC4052 • MM74HC4053
Logic Diagrams
MM74HC4051
MM74HC4052
MM74HC4053
3
www.fairchildsemi.com
MM74HC4051 • MM74HC4052 • MM74HC4053
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions
(Note 2)
Supply Voltage (VCC)
−0.5 to +7.5V
Supply Voltage (VEE)
+0.5 to −7.5V
−1.5 to VCC +1.5V
Control Input Voltage (VIN)
VEE −0.5 to VCC +0.5V
Switch I/O Voltage (VIO)
Clamp Diode Current (IIK, IOK)
±20 mA
Output Current, per pin (IOUT)
±25 mA
Max
Units
2
6
V
Supply Voltage (VEE)
0
−6
V
0
VCC
V
−40
+85
°C
DC Input or Output Voltage
(VIN, VOUT)
Operating Temperature Range (TA)
±50 mA
VCC or GND Current, per pin (ICC)
Storage Temperature Range (TSTG)
Min
Supply Voltage (VCC)
Input Rise or Fall Times
−65°C to +150°C
(tr, tf) VCC = 2.0V
1000
ns
VCC = 4.5V
500
ns
VCC = 6.0V
400
ns
Power Dissipation (PD)
(Note 3)
600 mW
S.O. Package only
500 mW
Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur.
Lead Temperature (TL)
(Soldering 10 seconds)
DC Electrical Characteristics
Symbol
VIH
VIL
RON
RON
IIN
ICC
IIZ
IIZ
Note 2: Unless otherwise specified all voltages are referenced to ground.
260°C
Parameter
Note 3: Power Dissipation temperature derating — plastic “N” package: −
12 mW/°C from 65°C to 85°C.
(Note 4)
Conditions
VEE
VCC
TA = 25°C
Typ
TA = −40 to 85°C TA = −55 to 125°C
Guaranteed Limits
Units
Minimum HIGH Level
2.0V
1.5
1.5
1.5
V
Input Voltage
4.5V
3.15
3.15
3.15
V
6.0V
4.2
4.2
4.2
V
Maximum LOW Level
2.0V
0.5
0.5
0.5
V
Input Voltage
4.5V
1.35
1.35
1.35
V
6.0V
1.8
1.8
1.8
V
Maximum “ON” Resistance
VINH = VIL, IS = 2.0 mA
GND 4.5V
40
160
200
240
Ω
(Note 5)
VIS = VCC to VEE
−4.5V 4.5V
30
120
150
170
Ω
(Figure 1)
−6.0V 6.0V
20
100
125
140
Ω
VINH = VIL, IS = 2.0 mA
GND 2.0V
100
230
280
320
Ω
VIS = VCC or VEE
GND 4.5V
40
110
140
170
Ω
(Figure 1)
−4.5V 4.5V
20
90
120
140
Ω
−6.0V 6.0V
15
80
100
115
Ω
Maximum “ON” Resistance
VCTL = VIL
GND 4.5V
10
20
25
25
Ω
Matching
VIS = VCC to GND
−4.5V 4.5V
5
10
15
15
Ω
−6.0V 6.0V
5
10
12
15
Ω
±0.1
±1.0
±1.0
µA
Maximum Control
VIN = VCCor GND
Input Current
VCC = 2−6V
Maximum Quiescent
VIN = VCC or GND
GND 6.0V
8
80
160
µA
Supply Current
IOUT = 0 µA
−6.0V 6.0V
16
160
320
µA
Maximum Switch “OFF”
VOS = VCCor VEE
GND 6.0V
±60
±600
±600
nA
Leakage Current
VIS = VEEor VCC
−6.0V 6.0V
±100
±1000
±1000
nA
(Switch Input)
VINH = VIH (Figure 2)
Maximum Switch
VIS = VCC to VEE
“ON” Leakage
Current
HC4051 VINH = VIL
±0.2
±2.0
±2.0
µA
±0.4
±4.0
±4.0
µA
(Figure 3)
VIS = VCC to VEE
HC4052 VINH = VIL (Figure 3)
VIS = VCC to VEE
HC4053 VINH = VIL (Figure 3)
www.fairchildsemi.com
GND 6.0V
−6.0V 6.0V
GND 6.0V
±0.1
±1.0
±1.0
µA
−6.0V 6.0V
±0.2
±2.0
±2.0
µA
GND 6.0V
±0.1
±1.0
±1.0
µA
−6.0V 6.0V
±0.1
±1.0
±1.0
µA
4
Symbol
IIZ
Parameter
VEE
Conditions
VOS = VCC or VEE
Maximum Switch
“OFF” Leakage
(Continued)
HC4051 VIS = VEE or VCC
VCC
TA = 25°C
Typ
TA = −40 to 85°C TA = −55 to 125°C
Units
Guaranteed Limits
GND 6.0V
±0.2
±2.0
±2.0
µA
−6.0V 6.0V
±0.4
±4.0
±4.0
µA
GND 6.0V
±0.1
±1.0
±1.0
µA
−6.0V 6.0V
±0.2
±2.0
±2.0
µA
GND 6.0V
±0.1
±1.0
±1.0
µA
−6.0V 6.0V
±0.1
±1.0
±1.0
µA
VINH = VIH
Current (Common Pin)
VOS = VCC or VEE
HC4052 VIS = VEE or VCC
VINH = VIH
VOS = VCC or VEE
HC4053 VIS = VEE or VCC
VINH = VIH
Note 4: For a power supply of 5V ±10% the worst case on resistances (RON) occurs for HC at 4.5V. Thus the 4.5V values should be used when designing
with this supply. Worst case VIH and VIL occur at VCC = 5.5V and 4.5V respectively. (The VIH value at 5.5V is 3.85V.) The worst case leakage current occur
for CMOS at the higher voltage and so the 5.5V values should be used.
Note 5: At supply voltages (VCC–VEE) approaching 2V the analog switch on resistance becomes extremely non-linear. Therefore it is recommended that
these devices be used to transmit digital only when using these supply voltages.
AC Electrical Characteristics
VCC = 2.0V−6.0V, VEE = 0V−6V, CL = 50 pF (unless otherwise specified)
Symbol
Parameter
Conditions
VEE
VCC
TA = 25°C
Typ
TA = −40 to 85°C TA = −55 to 125°C
Guaranteed Limits
Units
tPHL, tPLH Maximum Propagation
GND
2.0V
25
60
75
90
ns
Delay Switch In to Out
GND
4.5V
5
12
15
18
ns
−4.5V
4.5V
4
8
12
14
ns
−6.0V
6.0V
3
7
11
13
ns
GND
2.0V
92
355
435
515
ns
tPZL, tPZH Maximum Switch Turn
RL = 1 kΩ
“ON” Delay
tPHZ, tPLZ Maximum Switch Turn
“OFF” Delay
fMAX
GND
4.5V
69
87
103
ns
−4.5V
4.5V
16
46
58
69
ns
−6.0V
6.0V
15
41
51
62
ns
GND
2.0V
65
290
365
435
ns
GND
4.5V
28
58
73
87
ns
−4.5V
4.5V
18
37
46
56
ns
−6.0V
6.0V
16
32
41
48
Minimum Switch
GND
4.5V
30
MHz
Frequency Response
−4.5V
4.5V
35
MHz
ns
20 log (VI/VO) = 3 dB
Control to Switch
RL = 600Ω,
VIS = 4 VPP
0V
4.5V
1080
mV
Feedthrough Noise
f = 1 MHz,
VIS = 8 VPP
−4.5V
4.5V
250
mV
CL = 50 pF
THD
Crosstalk between
RL = 600Ω,
VIS = 4 VPP
0V
4.5
−52
dB
any Two Switches
f = 1 MHz
VIS = 8 VPP
−4.5V
4.5V
−50
dB
Switch OFF Signal
RL = 600Ω,
VIS = 4 VPP
0V
4.5V
−42
dB
Feedthrough
f = 1 MHz,
VIS = 8 VPP
−4.5V
4.5V
−44
dB
Isolation
VCTL = VIL
Sinewave Harmonic
RL = 10 kΩ,
VIS = 4 VPP
0V
4.5V
0.013
%
Distortion
CL = 50 pF,
VIS = 8 VPP
−4.5V
4.5V
0.008
%
f = 1 kHz
CIN
Maximum Control
5
10
10
10
pF
Input Capacitance
CIN
CIN
Maximum Switch
Input
15
Input Capacitance
4051 Common
90
4052 Common
45
4053 Common
30
Maximum Feedthrough
Capacitance
5
5
pF
pF
www.fairchildsemi.com
MM74HC4051 • MM74HC4052 • MM74HC4053
DC Electrical Characteristics
MM74HC4051 • MM74HC4052 • MM74HC4053
AC Test Circuits and Switching Time Waveforms
FIGURE 1. “ON” Resistance
FIGURE 2. “OFF” Channel Leakage Current
FIGURE 3. “ON” Channel Leakage Current
FIGURE 4. tPHL, tPLH Propagation Delay Time Signal Input to Signal Output
FIGURE 5. tPZL, tPLZ Propagation Delay Time Control to Signal Output
FIGURE 6. tPZH, tPHZ Propagation Delay Time Control to Signal Output
www.fairchildsemi.com
6
MM74HC4051 • MM74HC4052 • MM74HC4053
AC Test Circuits and Switching Time Waveforms
(Continued)
FIGURE 7. Crosstalk: Control Input to Signal Output
FIGURE 8. Crosstalk Between Any Two Switches
Typical Performance Characteristics
Typical “On” Resistance vs Input Voltage
VCC =−VEE
Special Considerations
avoid drawing VCC current when switch current flows into
the analog switch pins, the voltage drop across the switch
must not exceed 1.2V (calculated from the ON resistance).
In certain applications the external load-resistor current
may include both VCC and signal line components. To
7
www.fairchildsemi.com
MM74HC4051 • MM74HC4052 • MM74HC4053
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
Package Number M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide
Package Number M16B
www.fairchildsemi.com
8
MM74HC4051 • MM74HC4052 • MM74HC4053
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M16D
9
www.fairchildsemi.com
MM74HC4051 • MM74HC4052 • MM74HC4053
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC16
www.fairchildsemi.com
10
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
Package Number N16E
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
1. Life support devices or systems are devices or systems
device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the
sonably expected to cause the failure of the life support
body, or (b) support or sustain life, and (c) whose failure
device or system, or to affect its safety or effectiveness.
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
www.fairchildsemi.com
user.
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.
MM74HC4051 • MM74HC4052 • MM74HC4053 8-Channel Analog Multiplexer •
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Similar pages