Fairchild MM74HCU04 Hex inverter Datasheet

Revised January 2005
MM74HCU04
Hex Inverter
General Description
Features
The MM74HCU04 inverters utilize advanced silicon-gate
CMOS technology to achieve operating speeds similar to
LS-TTL gates with the low power consumption of standard
CMOS integrated circuits.
■ Typical propagation delay: 7 ns
The MM74HCU04 is an unbuffered inverter. It has high
noise immunity and the ability to drive 15 LS-TTL loads.
The 74HCU logic family is functionally as well as pin-out
compatible with the standard 74LS logic family. All inputs
are protected from damage due to static discharge by internal diode clamps to VCC and ground.
■ Low input current: 1 µA maximum
■ Fanout of 15 LS-TTL loads
■ Quiescent power consumption: 10 µA maximum at room
temperature
Ordering Code:
Order Number
Package
Package Description
Number
MM74HCU04M
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
MM74HCU04MX_NL
M14A
Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
MM74HCU04SJ
MM74HCU04MTC
M14D
MTC14
Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HCU04N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
MM74HCU04N_NL
N14A
Pb-Free 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Pb-Free package per JEDEC J-STD-020B.
Connection Diagram
Schematic Diagram
Pin Assignments for DIP, SOIC, SOP and TSSOP
Top View
© 2005 Fairchild Semiconductor Corporation
DS005296
www.fairchildsemi.com
MM74HCU04 Hex Inverter
September 1983
MM74HCU04
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions
(Note 2)
−0.5 to +7.0V
Supply Voltage (VCC)
DC Input Voltage (VIN)
−1.5 to VCC +1.5V
DC Output Voltage (VOUT)
−0.5 to VCC +0.5V
Clamp Diode Current (IIK, IOK)
±20 mA
DC Output Current, per pin (IOUT)
±25 mA
DC VCC or GND Current, per pin (ICC)
±50 mA
600 mW
S.O. Package only
500 mW
Units
6
V
DC Input or Output Voltage
0
VCC
V
−40
+85
°C
Operating Temperature Range (TA)
Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur.
Power Dissipation (PD)
(Note 3)
Max
2
(VIN, VOUT )
−65°C to +150°C
Storage Temperature Range (TSTG)
Min
Supply Voltage (VCC)
Note 2: Unless otherwise specified all voltages are referenced to ground.
Note 3: Power Dissipation temperature derating — plastic “N” package: −
12 mW/°C from 65°C to 85°C.
Lead Temperature (TL)
260°C
(Soldering 10 seconds)
DC Electrical Characteristics
Symbol
VIH
VIL
VOH
Parameter
Conditions
(Note 4)
TA = 25°C
VCC
Typ
TA = −40 to 85°C TA = −55 to 125°C
Guaranteed Limits
Units
Minimum HIGH Level
2.0V
1.7
1.7
1.7
V
Input Voltage
4.5V
3.6
3.6
3.6
V
6.0V
4.8
4.8
4.8
V
Maximum LOW Level
2.0V
0.3
0.3
0.3
V
Input Voltage
4.5V
0.8
0.8
0.8
V
6.0V
1.1
1.1
1.1
V
Minimum HIGH Level
VIN = VIL
Output Voltage
|IOUT| ≤ 20 µA
2.0V
2.0
1.8
1.8
1.8
V
4.5V
4.5
4.0
4.0
4.0
V
6.0V
6.0
5.5
5.5
5.5
V
|IOUT| ≤ 4.0 mA
4.5V
4.2
3.98
3.84
3.7
V
|IOUT| ≤ 5.2 mA
6.0V
5.7
5.48
5.34
5.2
V
VIN = GND
VOL
Maximum LOW Level
VIN = VIH
Output Voltage
|IOUT| ≤ 20 µA
2.0V
0
0.2
0.2
0.2
V
4.5V
0
0.5
0.5
0.5
V
6.0V
0
0.5
0.5
0.5
V
|IOUT| ≤ 6.0 mA
4.5V
0.2
0.26
0.33
0.4
V
|IOUT| ≤ 7.8 mA
6.0V
0.2
0.26
0.33
0.4
V
VIN = VCC or GND
6.0V
±0.1
±1.0
±1.0
µA
Maximum Quiescent
VIN = VCC or GND
6.0V
2.0
20
40
µA
Supply Current
IOUT = 0 µA
VIN = VCC
IIN
Maximum Input
Current
ICC
Note 4: For a power supply of 5V ±10% the worst case output voltages (VOH, and VOL) occur for HC at 4.5V. Thus the 4.5V values should be used when
designing with this supply. Worst case VIH and VIL occur at VCC = 5.5V and 4.5V respectively. (The VIH value at 5.5V is 3.85V.) The worst case leakage current (IIN, ICC, and IOZ) occur for CMOS at the higher voltage and so the 6.0V values should be used.
www.fairchildsemi.com
2
VCC = 5V, TA = 25°C, CL = 15 pF, tr = tf = 6 ns
Symbol
tPHL, tPLH
Parameter
Conditions
Typ
Maximum Propagation
7
Guaranteed
Limit
13
Units
ns
Delay
AC Electrical Characteristics
VCC = 2.0V to 6.0V, CL = 50 pF, tr = tf = 6 ns (unless otherwise specified)
Symbol
tPHL, tPLH
tTLH, tTHL
CPD
Parameter
Conditions
VCC
TA=25°C
Typ
TA=−40 to 85°C TA=−55 to 125°C
Guaranteed Limits
Units
Maximum Propagation
2.0V
49
82
103
120
Delay
4.5V
9.9
16
21
24
ns
6.0V
8.4
14
18
20
ns
Maximum Output Rise
2.0V
30
75
95
110
ns
and Fall Time
4.5V
8
15
19
22
ns
6.0V
7
13
16
19
ns
Power Dissipation
(per gate)
90
ns
pF
Capacitance (Note 5)
CIN
Maximum Input
8
15
15
15
pF
Capacitance
Note 5: CPD determines the no load dynamic power consumption, PD = CPD VCC2 f + ICC VCC, and the no load dynamic current consumption,
IS = CPD VCC f + ICC.
Typical Applications
FIGURE 1. Crystal Oscillator
FIGURE 2. Stable RC Oscillator
FIGURE 3. Schmitt Trigger
3
www.fairchildsemi.com
MM74HCU04
AC Electrical Characteristics
MM74HCU04
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A
www.fairchildsemi.com
4
MM74HCU04
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M14D
5
www.fairchildsemi.com
MM74HCU04
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC14
www.fairchildsemi.com
6
MM74HCU04 Hex Inverter
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com
Similar pages