MPS3702 MMBT3702 C E C TO-92 BE B SOT-23 Mark: 137 PNP General Purpose Amplifier This device is designed for use as general purpose amplifiers and switches requiring collector currents to 500mA. Sourced from Process 63. See PN2907A for characteristics. Absolute Maximum Ratings* Symbol TA = 25°C unless otherwise noted Parameter Value Units V VCEO Collector-Emitter Voltage 25 VCBO Collector-Base Voltage 40 V VEBO Emitter-Base Voltage 5.0 V IC Collector Current - Continuous 800 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD TA = 25°C unless otherwise noted Characteristic RθJC Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case RθJA Thermal Resistance, Junction to Ambient *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." 1997 Fairchild Semiconductor Corporation Max Units MPS3702 625 5.0 83.3 *MMBT3702 350 2.8 200 357 mW mW/°C °C/W °C/W MPS3702 / MMBT3702 Discrete POWER & Signal Technologies (continued) Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)CEO Collector-Emitter Breakdown Voltage* I C = 10 mA, I B = 0 25 V V(BR)CBO Collector-Base Breakdown Voltage I C = 100 µA, IE = 0 40 V V(BR)EBO Emitter-Base Breakdown Voltage Collector Cutoff Current I E = 100 µA, I C = 0 VCB = 20 V, IE = 0 5.0 ICBO IEBO Emitter Cutoff Current VEB = 3.0 V, I C = 0 V 100 nA 100 nA ON CHARACTERISTICS* hFE DC Current Gain VCE = 5.0 V, IC = 50 mA VCE(sat) Collector-Emitter Saturation Voltage IC = 50 mA, IB = 5.0 mA VBE(on) Base-Emitter On Voltage IC = 50 mA, VCE = 5.0 V 60 0.6 300 0.25 V 1.0 V SMALL SIGNAL CHARACTERISTICS Cob Output Capacitance VCB = 10 V, f = 1.0 MHz fT Current Gain - Brandwidth Product I C = 50 mA, VCE = 5.0 V, f = 20 MHz *Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% 12 100 pF MHz MPS3702 / MMBT3702 PNP General Purpose Amplifier