Vishay MMBZ4710-V Small signal zener diode Datasheet

MMBZ4681-V to MMBZ4717-V
www.vishay.com
Vishay Semiconductors
Small Signal Zener Diodes
FEATURES
• Silicon planar Zener diodes
3
1
• Standard Zener voltage tolerance is ± 5 %. Other
tolerances are available upon request
• These diodes are also available in DO-35 case
with the type designation 1N4681 to 1N4717 and
SOD-123 case with the type designation
MMSZ4681-V to MMSZ4717-V
2
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
UNIT
VZ range nom.
2.4 to 43
V
Test current IZT
0.05
mA
VZ specification
Pulse current
Int. construction
Single
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
TAPED UNITS PER REEL
MINIMUM ORDER QUANTITY
MMBZ4681-V to MMBZ4717-V
MMBZ4681-V to
MMBZ4717-V-series-GS18
10 000 (8 mm tape on 13" reel)
10 000/box
MMBZ4681-V to MMBZ4717-V
MMBZ4817-V to
MMBZ4717-V-series-GS08
3000 (8 mm tape on 7" reel)
15 000/box
PACKAGE
PACKAGE NAME
SOT-23
WEIGHT
8.8 mg
MOLDING COMPOUND MOISTURE SENSITIVITY
FLAMMABILITY RATING
LEVEL
UL 94 V-0
MSL level 1
(according J-STD-020)
SOLDERING
CONDITIONS
260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Power dissipation
Zener current
Junction to ambient air
Junction temperature, maximum
Storage temperature range
Rev. 1.7, 29-Nov-11
TEST CONDITION
SYMBOL
VALUE
UNIT
On FR - 5 board using recommended solder pad
layout
Ptot
350
mW
RthJA
420
K/W
Tj
150
°C
Tstg
- 55 to + 150
°C
See table “Characteristics”
On FR - 5 board using recommended solder pad
layout
Document Number: 85771
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MMBZ4681-V to MMBZ4717-V
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PART NUMBER
ZENER VOLTAGE RANGE (1)
TEST
CURRENT
REVERSE CURRENT
VOLTAGE
CHANGE (2)
VZ at IZT1
IZT1
IR at VR
VZ
MARKING
CODE
V
mA
MIN.
NOM.
MAX.
μA
V
MAX.
V
MAX.
MMBZ4681-V
CF
2.28
2.4
2.52
0.05
2
1
0.8
MMBZ4682-V
CH
2.57
2.7
2.84
0.05
1
1
0.85
MMBZ4683-V
CJ
2.85
3
3.15
0.05
0.8
1
0.9
MMBZ4684-V
CK
3.14
3.3
3.47
0.05
7.5
1.5
0.95
MMBZ4685-V
CM
3.42
3.6
3.78
0.05
7.5
2
0.95
MMBZ4686-V
CN
3.71
3.9
4.1
0.05
5
2
0.97
MMBZ4687-V
CP
4.09
4.3
4.52
0.05
4
2
0.99
MMBZ4688-V
CT
4.47
4.7
4.94
0.05
10
3
0.99
MMBZ4689-V
CU
4.85
5.1
5.36
0.05
10
3
0.97
MMBZ4690-V
CV
5.32
5.6
5.88
0.05
10
4
0.96
MMBZ4691-V
CA
5.89
6.2
6.51
0.05
10
5
0.95
MMBZ4692-V
CX
6.46
6.8
7.14
0.05
10
5.1
0.9
MMBZ4693-V
CY
7.13
7.5
7.88
0.05
10
5.7
0.75
MMBZ4694-V
CZ
7.79
8.2
8.61
0.05
1
6.2
0.5
MMBZ4695-V
DC
8.27
8.7
9.14
0.05
1
6.6
0.1
MMBZ4696-V
DD
8.65
9.1
9.56
0.05
1
6.9
0.08
MMBZ4697-V
DE
9.5
10
10.5
0.05
1
7.6
0.1
MMBZ4698-V
DF
10.5
11
11.6
0.05
0.05
8.4
0.11
MMBZ4699-V
DH
11.4
12
12.6
0.05
0.05
9.1
0.12
MMBZ4700-V
DJ
12.4
13
13.7
0.05
0.05
9.8
0.13
MMBZ4701-V
DK
13.3
14
14.7
0.05
0.05
10.6
0.14
MMBZ4702-V
DM
14.3
15
15.8
0.05
0.05
11.4
0.15
MMBZ4703-V
DN
15.2
16
16.8
0.05
0.05
12.1
0.16
MMBZ4704-V
DP
16.2
17
17.9
0.05
0.05
12.9
0.17
MMBZ4705-V
DT
17.1
18
18.9
0.05
0.05
13.6
0.18
MMBZ4706-V
DU
18.1
19
20
0.05
0.05
14.4
0.19
MMBZ4707-V
DV
19
20
21
0.05
0.01
15.2
0.2
MMBZ4708-V
DA
20.9
22
23.1
0.05
0.01
16.7
0.22
MMBZ4709-V
DZ
22.8
24
25.2
0.05
0.01
18.2
0.24
MMBZ4710-V
DY
23.8
25
26.3
0.05
0.01
19
0.25
MMBZ4711-V
EA
25.7
27
28.4
0.05
0.01
20.4
0.27
MMBZ4712-V
EC
26.6
28
29.4
0.05
0.01
21.2
0.28
MMBZ4713-V
ED
28.5
30
31.5
0.05
0.01
22.8
0.3
MMBZ4714-V
EE
31.4
33
34.7
0.05
0.01
25
0.33
0.36
MMBZ4715-V
EF
34.2
36
3.7.8
0.05
0.01
27.3
MMBZ4716-V
EH
37.1
39
41
0.05
0.01
29.6
0.39
MMBZ4717-V
EJ
40.9
43
45.2
0.05
0.01
32.6
0.43
Notes
• Maximum VF = 0.9 V, at IF = 10 mA
(1) Tested with pulse test current
(2) Maximum voltage change (V ). Voltage change is equal to the difference between V at 100 μA and V at 10 μA.
Z
Z
Z
Rev. 1.7, 29-Nov-11
Document Number: 85771
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MMBZ4681-V to MMBZ4717-V
www.vishay.com
Vishay Semiconductors
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
15
TKVZ - Temperature Coefficient
of VZ (10-4/K)
Ptot - Total Power Dissipation (mW)
600
500
400
300
200
100
0
95 9602
Fig. 1 - Total Power Dissipation vs. Ambient Temperature
IZ = 5 mA
0
0
10
20
30
40
50
VZ - Z-Voltage (V)
95 9600
Fig. 4 - Temperature Coefficient of VZ vs. Z-Voltage
1000
100
IF - Forward Current (mA)
VZ - Voltage Change (mV)
5
-5
80
120
160 200
40
Tamb - Ambient Temperature (°C)
0
Tj = 25 °C
100
IZ = 5 mA
10
10
Tj = 25 °C
1
0.1
0.01
0.001
1
0
5
10
15
20
0
25
VZ - Z-Voltage (V)
95 9598
0.2
0.4
0.6
0.8
1.0
VF - Forward Voltage (V)
95 9605
Fig. 2 - Typical Change of Working Voltage under Operating
Conditions at Tamb = 25 °C
Fig. 5 - Forward Current vs. Forward Voltage
1.3
100
VZtn = VZt/VZ (25 °C)
1.2
80
TKVZ = 10 x 10-4/K
8 x 10-4/K
6 x 10-4/K
1.1
4 x 10-4/K
2 x 10-4/K
0
1.0
- 2 x 10-4/K
- 4 x 10-4/K
0.9
0.8
IZ - Z-Current (mA)
VZtn - Relative Voltage Change
10
Ptot = 500 mW
Tamb = 25 °C
60
40
20
0
- 60
95 9599
0
60
120
180
240
Tj - Junction Temperature (°C)
Fig. 3 - Typical Change of Working Voltage vs.
Junction Temperature
Rev. 1.7, 29-Nov-11
0
95 9604
4
6
8
12
20
VZ - Z-Voltage (V)
Fig. 6 - Z-Current vs. Z-Voltage
Document Number: 85771
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MMBZ4681-V to MMBZ4717-V
www.vishay.com
Vishay Semiconductors
50
Ptot = 500 mW
Tamb = 25 °C
40
IZ - Z-Current (mA)
rZ - Differential Z-Resistance (Ω)
1000
30
20
10
IZ = 1 mA
100
5 mA
10 10 mA
Tj = 25 °C
1
0
15
20
25
30
35
VZ - Z-Voltage (V)
95 9607
5
0
15
20
25
VZ - Z-Voltage (V)
95 9606
Fig. 7 - Z-Current vs. Z-Voltage
10
Fig. 8 - Differential Z-Resistance vs. Z-Voltage
PACKAGE DIMENSIONS in millimeters (inches): SOT-23
1.15 (0.045)
o8
°
0.2 (0.008)
0.098 (0.004)
0.175 (0.007)
0.1 (0.004) max.
0.550 ref. (0.022 ref.)
0.9 (0.035)
3.1 (0.122)
2.8 (0.110)
0.45 (0.018)
0.35 (0.014)
0.35 (0.014)
0° t
0.5 (0.020)
0.45 (0.018)
0.3 (0.012)
2.6 (0.102)
2.35 (0.093)
Foot print recommendation:
1 (0.039)
0.9 (0.035)
0.9 (0.035)
0.7 (0.028)
2 (0.079)
1.43 (0.056)
1.20 (0.047)
0.45 (0.018)
0.35 (0.014)
1 (0.039)
0.9 (0.035)
0.95 (0.037)
0.95 (0.037)
Document no.: 6.541-5014.01-4
Rev. 8 - Date: 23.Sept.2009
17418
Rev. 1.7, 29-Nov-11
Document Number: 85771
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Similar pages