ON MMSZ36ET1 Zener voltage regulator Datasheet

MMSZ2V4ET1 Series
Zener Voltage Regulators
500 mW SOD−123 Surface Mount
Three complete series of Zener diodes are offered in the convenient,
surface mount plastic SOD−123 package. These devices provide a
convenient alternative to the leadless 34−package style.
http://onsemi.com
Specification Features
•
•
•
•
•
•
500 mW Rating on FR−4 or FR−5 Board
Wide Zener Reverse Voltage Range − 2.4 V to 56 V
Package Designed for Optimal Automated Board Assembly
Small Package Size for High Density Applications
ESD Rating of Class 3 (>16 kV) per Human Body Model
Peak Power − 225 W (8 X 20 s)
1
Cathode
2
Anode
2
Mechanical Characteristics
CASE: Void-free, transfer-molded, thermosetting plastic case
FINISH: Corrosion resistant finish, easily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
1
SOD−123
CASE 425
STYLE 1
260°C for 10 Seconds
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V−0
MARKING DIAGRAM
ÂÂ
ÂÂ
ÂÂ
MAXIMUM RATINGS
Symbol
Max
Unit
Peak Power Dissipation @ 20 s (Note 1)
@ TL ≤ 25°C
Rating
Ppk
225
Watts
Total Power Dissipation on FR−5 Board,
(Note 2) @ TL = 75°C
Derated above 75°C
PD
500
6.7
mW
mW/°C
340
°C/W
Thermal Resistance −
Junction−to−Ambient (Note 3)
RJA
Thermal Resistance −
Junction−to−Lead (Note 3)
RJL
150
°C/W
TJ, Tstg
−55 to
+150
°C
Junction and Storage
Temperature Range
June, 2004 − Rev. 1
1
= Specific Device Code
= Date Code
ORDERING INFORMATION
Package
Shipping†
MMSZxxxET1
SOD−123
3000/Tape & Reel
MMSZxxxET3
SOD−123
10,000/Tape & Reel
Device
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits
are exceeded, device functional operation is not implied, damage may occur
and reliability may be affected.
1. Nonrepetitive current pulse per Figure 11
2. FR−5 = 3.5 X 1.5 inches, using the On minimum recommended footprint as
shown in Figure 12.
3. Thermal Resistance measurement obtained via infrared Scan Method
 Semiconductor Components Industries, LLC, 2004
xx
M
xx M
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
DEVICE MARKING INFORMATION
See specific marking information in the device marking
column of the Electrical Characteristics table on page 2 of
this data sheet.
Publication Order Number:
MMSZ2V4ET1/D
MMSZ2V4ET1 Series
ELECTRICAL CHARACTERISTICS (TA = 25°C unless
I
otherwise noted, VF = 0.95 V Max. @ IF = 10 mA)
Symbol
IF
Parameter
VZ
Reverse Zener Voltage @ IZT
IZT
Reverse Current
ZZT
Maximum Zener Impedance @ IZT
IR
Reverse Leakage Current @ VR
VR
Reverse Voltage
IF
Forward Current
VF
Forward Voltage @ IF
VZ VR
V
IR VF
IZT
Zener Voltage Regulator
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
VZ1 (V)
(Notes 4 and 5)
ZZT1
(Note 6)
VZ2 (V)
(Notes 4 and 5)
@ IZT1 = 5 mA
ZZT2
(Note 6)
Leakage Current
@ IZT2 = 1 mA
IR @ VR
Device
Device
Marking
Min
Nom
Max
Min
Max
A
V
MMSZ2V4ET1
CL1
2.28
2.4
2.52
100
1.7
2.1
600
50
1
MMSZ2V7ET1
CL2
2.57
2.7
2.84
100
1.9
2.4
600
20
1
MMSZ3V0ET1
CL3
2.85
3.0
3.15
95
2.1
2.7
600
10
1
MMSZ3V3ET1
CL4
3.14
3.3
3.47
95
2.3
2.9
600
5
1
MMSZ3V6ET1
CL5
3.42
3.6
3.78
90
2.7
3.3
600
5
1
MMSZ3V9ET1
CL6
3.71
3.9
4.10
90
2.9
3.5
600
3
1
MMSZ4V3ET1
CL7
4.09
4.3
4.52
90
3.3
4.0
600
3
1
MMSZ4V7ET1
CL8
4.47
4.7
4.94
80
3.7
4.7
500
3
2
MMSZ5V1ET1
CL9
4.85
5.1
5.36
60
4.2
5.3
480
2
2
MMSZ5V6ET1
CM1
5.32
5.6
5.88
40
4.8
6.0
400
1
2
MMSZ6V2ET1
CM2
5.89
6.2
6.51
10
5.6
6.6
150
3
4
MMSZ6V8ET1
CM3
6.46
6.8
7.14
15
6.3
7.2
80
2
4
MMSZ7V5ET1
CM4
7.13
7.5
7.88
15
6.9
7.9
80
1
5
MMSZ8V2ET1
CM5
7.79
8.2
8.61
15
7.6
8.7
80
0.7
5
MMSZ9V1ET1
CM6
8.65
9.1
9.56
15
8.4
9.6
100
0.5
6
MMSZ10ET1
CM7
9.50
10
10.50
20
9.3
10.6
150
0.2
7
MMSZ11ET1
CM8
10.45
11
11.55
20
10.2
11.6
150
0.1
8
MMSZ12ET1
CM9
11.40
12
12.60
25
11.2
12.7
150
0.1
8
MMSZ13ET1
CN1
12.35
13
13.65
30
12.3
14.0
170
0.1
8
MMSZ15ET1
CN2
14.25
15
15.75
30
13.7
15.5
200
0.05
10.5
MMSZ16ET1
CN3
15.20
16
16.80
40
15.2
17.0
200
0.05
11.2
MMSZ18ET1
CN4
17.10
18
18.90
45
16.7
19.0
225
0.05
12.6
Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and
best overall value.
4. The type numbers shown have a standard tolerance of ±5% on the nominal Zener Voltage.
5. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = 1 ms.
6. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for
IZ(AC) = 0.1 IZ(DC), with the AC frequency = 1 kHz.
http://onsemi.com
2
MMSZ2V4ET1 Series
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
VZ1 (V)
(Notes 4 and 5)
ZZT1
(Note 6)
VZ2 (V)
(Notes 4 and 5)
@ IZT1 = 5 mA
ZZT2
(Note 6)
Leakage Current
IR @ VR
@ IZT2 = 1 mA
Device
Device
Marking
Min
Nom
Max
Min
Max
A
MMSZ20ET1
CN5
19.00
20
21.00
55
18.7
21.1
225
0.05
14
MMSZ22ET1
CN6
20.90
22
23.10
55
20.7
23.2
250
0.05
15.4
MMSZ24ET1
CN7
22.80
24
25.20
70
22.7
25.5
250
0.05
16.8
MMSZ27ET1
CN8
25.65
27
28.35
80
25
28.9
300
0.05
18.9
MMSZ30ET1
CN9
28.50
30
31.50
80
27.8
32
300
0.05
21
MMSZ33ET1
CP1
31.35
33
34.65
80
30.8
35
325
0.05
23.1
MMSZ36ET1
CP2
34.20
36
37.80
90
33.8
38
350
0.05
25.2
MMSZ39ET1
CP3
37.05
39
40.95
130
36.7
41
350
0.05
27.3
MMSZ43ET1
CP4
40.85
43
45.15
150
39.7
46
375
0.05
30.1
MMSZ47ET1
CP5
MMSZ51ET1
CP6
48.45
51
53.55
180
47.6
54
400
0.05
35.7
MMSZ56ET1
CP7
53.20
56
58.80
200
51.5
60
425
0.05
39.2
V
Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and
best overall value.
4. The type numbers shown have a standard tolerance of ±5% on the nominal Zener Voltage.
5. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = 1 ms.
6. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for
IZ(AC) = 0.1 IZ(DC), with the AC frequency = 1 kHz.
http://onsemi.com
3
MMSZ2V4ET1 Series
8
100
7
θ VZ, TEMPERATURE COEFFICIENT (mV/°C)
θ VZ, TEMPERATURE COEFFICIENT (mV/°C)
TYPICAL CHARACTERISTICS
TYPICAL TC VALUES
FOR MMSZ2V4T1 SERIES
6
5
4
10
VZ @ IZT
3
2
1
0
−1
−2
1−3
2
3
4
5
6
7
8
9
10
VZ, NOMINAL ZENER VOLTAGE (V)
11
TYPICAL TC VALUES
FOR MMSZ2V4T1 SERIES
VZ @ IZT
12
10
100
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 1. Temperature Coefficients
(Temperature Range − 55°C to +150°C)
Figure 2. Temperature Coefficients
(Temperature Range − 55°C to +150°C)
1000
Ppk, PEAK SURGE POWER (WATTS)
P D, POWER DISSIPATION (WATTS)
1.2
1.0
PD versus TL
0.8
0.6
100
PD versus TA
0.4
0.2
0
0
25
50
75
100
T, TEMPERATURE (°C)
RECTANGULAR
WAVEFORM, TA = 25°C
125
10
1
150
0.1
Figure 3. Steady State Power Derating
1000
1000
IZ = 1 mA
TJ = 25°C
IZ(AC) = 0.1 IZ(DC)
f = 1 kHz
IF, FORWARD CURRENT (mA)
Z ZT, DYNAMIC IMPEDANCE (Ω )
10
100
PW, PULSE WIDTH (ms)
Figure 4. Maximum Nonrepetitive Surge Power
1000
100
75 V (MMSZ5267BT1)
91 V (MMSZ5270BT1)
100
5 mA
20 mA
10
1
1
1
10
VZ, NOMINAL ZENER VOLTAGE
100
10
150°C
1
0.4
Figure 5. Effect of Zener Voltage on
Zener Impedance
0.5
25°C
0°C
75°C
0.6
0.7
0.8
0.9
1.0
VF, FORWARD VOLTAGE (V)
Figure 6. Typical Forward Voltage
http://onsemi.com
4
1.1
1.2
MMSZ2V4ET1 Series
TYPICAL CHARACTERISTICS
1000
TA = 25°C
0 V BIAS
1 V BIAS
C, CAPACITANCE (pF)
I R , LEAKAGE CURRENT ( µA)
1000
100
BIAS AT
50% OF VZ NOM
1
10
1
+150°C
0.1
0.01
10
1
100
10
VZ, NOMINAL ZENER VOLTAGE (V)
100
0.001
+ 25°C
0.0001
−55°C
0.00001
0
10
Figure 7. Typical Capacitance
20
30
40
50
60
70
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 8. Typical Leakage Current
100
100
I Z , ZENER CURRENT (mA)
TA = 25°C
10
1
10
1
0.1
0.1
0
2
4
6
8
VZ, ZENER VOLTAGE (V)
0.01
12
10
10
100
50
70
VZ, ZENER VOLTAGE (V)
PEAK VALUE IRSM @ 8 s
tr
90
30
PULSE WIDTH (tP) IS DEFINED
AS THAT POINT WHERE THE
PEAK CURRENT DECAY = 8 s
80
70
60
HALF VALUE IRSM/2 @ 20 s
50
40
30
tP
20
10
0
0
20
90
Figure 10. Zener Voltage versus Zener Current
(12 V to 91 V)
Figure 9. Zener Voltage versus Zener Current
(VZ Up to 12 V)
% OF PEAK PULSE CURRENT
I Z , ZENER CURRENT (mA)
TA = 25°C
0.01
80
40
60
t, TIME (s)
Figure 11. 8 × 20 s Pulse Waveform
http://onsemi.com
5
80
90
MMSZ2V4ET1 Series
PACKAGE DIMENSIONS
SOD−123
CASE 425−04
ISSUE C
A
ÂÂÂÂ
ÂÂÂÂ
C
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
H
1
K
DIM
A
B
C
D
E
H
J
K
B
E
2
INCHES
MIN
MAX
0.055
0.071
0.100
0.112
0.037
0.053
0.020
0.028
0.01
−−−
0.000
0.004
−−−
0.006
0.140
0.152
MILLIMETERS
MIN
MAX
1.40
1.80
2.55
2.85
0.95
1.35
0.50
0.70
0.25
−−−
0.00
0.10
−−−
0.15
3.55
3.85
STYLE 1:
PIN 1. CATHODE
2. ANODE
J
D
SOLDERING FOOTPRINT
ÉÉ
ÉÉ
ÉÉ
0.91
0.036
2.36
0.093
4.19
0.165
ÉÉ
ÉÉ
ÉÉ
SCALE 10:1
1.22
0.048
mm inches
Figure 12. SOD−123
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
6
For additional information, please contact your
local Sales Representative.
MMSZ2V4ET1/D
Similar pages