ON MMSZ5241BT3 Zener voltage regulator Datasheet

MMSZ5221BT1 Series
Preferred Device
Zener Voltage Regulators
500 mW SOD−123 Surface Mount
Three complete series of Zener diodes are offered in the convenient,
surface mount plastic SOD−123 package. These devices provide a
convenient alternative to the leadless 34−package style.
http://onsemi.com
Features
•
•
•
•
•
•
•
500 mW Rating on FR−4 or FR−5 Board
Wide Zener Reverse Voltage Range − 2.4 V to 110 V
Package Designed for Optimal Automated Board Assembly
Small Package Size for High Density Applications
General Purpose, Medium Current
ESD Rating of Class 3 (>16 kV) per Human Body Model
Pb−Free Packages are Available
1
Cathode
2
Anode
SOD−123
CASE 425
STYLE 1
2
1
Mechanical Characteristics
CASE: Void-free, transfer-molded, thermosetting plastic case
FINISH: Corrosion resistant finish, easily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
MARKING DIAGRAM
ÂÂ
ÂÂ
ÂÂ
260°C for 10 Seconds
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V−0
xx
M
xx M
= Specific Device Code
= Date Code
MAXIMUM RATINGS
Rating
Symbol
Total Power Dissipation on FR−5 Board,
(Note 1) @ TL = 75°C
Derated above 75°C
PD
Max
Unit
500
6.7
mW
mW/°C
ORDERING INFORMATION
Thermal Resistance, (Note 2)
Junction−to−Ambient
RJA
340
°C/W
Thermal Resistance, (Note 2)
Junction−to−Lead
RJL
150
°C/W
Junction and Storage Temperature Range
TJ, Tstg
°C
−55 to
+150
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits
are exceeded, device functional operation is not implied, damage may occur
and reliability may be affected.
1. FR−5 = 3.5 X 1.5 inches, using the minimum recommended footprint.
2. Thermal Resistance measurement obtained via infrared Scan Method.
Package
Shipping†
MMSZ52xxBT1
SOD−123
3000/Tape & Reel
MMSZ52xxBT1G
SOD−123
(Pb−Free)
3000/Tape & Reel
MMSZ52xxBT3
SOD−123
10,000/Tape & Reel
MMSZ52xxBT3G
SOD−123
(Pb−Free)
10,000/Tape & Reel
Device**
**The “T1” suffix refers to an 8 mm, 7 inch reel.
The “T3” suffix refers to an 8 mm, 13 inch reel.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
DEVICE MARKING INFORMATION
See specific marking information in the device marking
column of the Electrical Characteristics table on page 3 of
this data sheet.
Devices listed in bold, italic are ON Semiconductor
Preferred devices. Preferred devices are recommended
choices for future use and best overall value.
 Semiconductor Components Industries, LLC, 2005
January, 2005 − Rev. 5
1
Publication Order Number:
MMSZ5221BT1/D
MMSZ5221BT1 Series
ELECTRICAL CHARACTERISTICS (TA = 25°C unless
I
otherwise noted, VF = 0.95 V Max. @ IF = 10 mA)
Symbol
IF
Parameter
VZ
Reverse Zener Voltage @ IZT
IZT
Reverse Current
ZZT
Maximum Zener Impedance @ IZT
IZK
Reverse Current
ZZK
Maximum Zener Impedance @ IZK
IR
Reverse Leakage Current @ VR
VR
Reverse Voltage
IF
Forward Current
VF
Forward Voltage @ IF
VZ VR
IR VF
IZT
Zener Voltage Regulator
http://onsemi.com
2
V
MMSZ5221BT1 Series
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
Zener Voltage (Notes 3 and 4)
VZ (Volts)
@ IZT
Zener Impedance (Note 5)
ZZT @ IZT
Leakage Current
ZZK @ IZK
IR @ VR
Device
Marking
Min
Nom
Max
mA
mA
A
Volts
MMSZ5221BT1, G
MMSZ5222BT1
MMSZ5223BT1, G
MMSZ5224BT1
MMSZ5225BT1
C1
C2
C3
C4
C5
2.28
2.38
2.57
2.66
2.85
2.4
2.5
2.7
2.8
3.0
2.52
2.63
2.84
2.94
3.15
20
20
20
20
20
30
30
30
30
29
1200
1250
1300
1400
1600
0.25
0.25
0.25
0.25
0.25
100
100
75
75
50
1
1
1
1
1
MMSZ5226BT1, G
MMSZ5227BT1, G
MMSZ5228BT1, G
MMSZ5229BT1, G
MMSZ5230BT1, G
D1
D2
D3
D4
D5
3.14
3.42
3.71
4.09
4.47
3.3
3.6
3.9
4.3
4.7
3.47
3.78
4.10
4.52
4.94
20
20
20
20
20
28
24
23
22
19
1600
1700
1900
2000
1900
0.25
0.25
0.25
0.25
0.25
25
15
10
5
5
1
1
1
1
2
MMSZ5231BT1, G
MMSZ5232BT1, G
MMSZ5233BT1, G
MMSZ5234BT1, G
MMSZ5235BT1, G
E1
E2
E3
E4
E5
4.85
5.32
5.70
5.89
6.46
5.1
5.6
6.0
6.2
6.8
5.36
5.88
6.30
6.51
7.14
20
20
20
20
20
17
11
7
7
5
1600
1600
1600
1000
750
0.25
0.25
0.25
0.25
0.25
5
5
5
5
3
2
3
3.5
4
5
MMSZ5236BT1, G
MMSZ5237BT1, G
MMSZ5238BT1
MMSZ5239BT1, G
MMSZ5240BT1, G
F1
F2
F3
F4
F5
7.13
7.79
8.27
8.65
9.50
7.5
8.2
8.7
9.1
10
7.88
8.61
9.14
9.56
10.50
20
20
20
20
20
6
8
8
10
17
500
500
600
600
600
0.25
0.25
0.25
0.25
0.25
3
3
3
3
3
6
6.5
6.5
7
8
MMSZ5241BT1
MMSZ5242BT1, G
MMSZ5243BT1, G
MMSZ5244BT1, G
MMSZ5245BT1, G
H1
H2
H3
H4
H5
10.45
11.40
12.35
13.30
14.25
11
12
13
14
15
11.55
12.60
13.65
14.70
15.75
20
20
9.5
9.0
8.5
22
30
13
15
16
600
600
600
600
600
0.25
0.25
0.25
0.25
0.25
2
1
0.5
0.1
0.1
8.4
9.1
9.9
10
11
MMSZ5246BT1, G
MMSZ5247BT1, G
MMSZ5248BT1, G
MMSZ5250BT1, G
J1
J2
J3
J5
15.20
16.15
17.10
19.00
16
17
18
20
16.80
17.85
18.90
21.00
7.8
7.4
7.0
6.2
17
19
21
25
600
600
600
600
0.25
0.25
0.25
0.25
0.1
0.1
0.1
0.1
12
13
14
15
MMSZ5251BT1, G
MMSZ5252BT1, G
MMSZ5253BT1
MMSZ5254BT1, G
MMSZ5255BT1, G
K1
K2
K3
K4
K5
20.90
22.80
23.75
25.65
26.60
22
24
25
27
28
23.10
25.20
26.25
28.35
29.40
5.6
5.2
5.0
4.6
4.5
29
33
35
41
44
600
600
600
600
600
0.25
0.25
0.25
0.25
0.25
0.1
0.1
0.1
0.1
0.1
17
18
19
21
21
MMSZ5256BT1, G
MMSZ5257BT1, G
MMSZ5258BT1, G
MMSZ5259BT1, G
MMSZ5260BT1, G
M1
M2
M3
M4
M5
28.50
31.35
34.20
37.05
40.85
30
33
36
39
43
31.50
34.65
37.80
40.95
45.15
4.2
3.8
3.4
3.2
3.0
49
58
70
80
93
600
700
700
800
900
0.25
0.25
0.25
0.25
0.25
0.1
0.1
0.1
0.1
0.1
23
25
27
30
33
MMSZ5261BT1, G
MMSZ5262BT1
MMSZ5263BT1
MMSZ5264BT1
MMSZ5265BT1, G
N1
N2
N3
N4
N5
44.65
48.45
53.20
57.00
58.90
47
51
56
60
62
49.35
53.55
58.80
63.00
65.10
2.7
2.5
2.2
2.1
2.0
105
125
150
170
185
1000
1100
1300
1400
1400
0.25
0.25
0.25
0.25
0.25
0.1
0.1
0.1
0.1
0.1
36
39
43
46
47
MMSZ5266BT1, G
MMSZ5267BT1, G
MMSZ5268BT1, G
MMSZ5269BT1
MMSZ5270BT1, G
P1
P2
P3
P4
P5
64.60
71.25
77.90
82.65
86.45
68
75
82
87
91
71.40
78.75
86.10
91.35
95.55
1.8
1.7
1.5
1.4
1.4
230
270
330
370
400
1600
1700
2000
2200
2300
0.25
0.25
0.25
0.25
0.25
0.1
0.1
0.1
0.1
0.1
52
56
62
68
69
MMSZ5272BT1
R2
104.5
110
115.5
1.1
750
3000
0.25
0.1
84
Device
3. The type numbers shown have a standard tolerance of ±5% on the nominal Zener voltage.
4. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30°C 1°C.
5. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the ac current applied.
The specified limits are for IZ(AC) = 0.1 IZ(dc) with the AC frequency = 1 KHz.
http://onsemi.com
3
MMSZ5221BT1 Series
VZ, TEMPERATURE COEFFICIENT (mV/°C)
VZ, TEMPERATURE COEFFICIENT (mV/°C)
TYPICAL CHARACTERISTICS
8
100
7
TYPICAL TC VALUES
FOR MMSZ5221BT1 SERIES
6
5
4
VZ @ IZT
3
2
1
0
−1
−2
−3
2
3
4
5
6
7
8
9
10
VZ, NOMINAL ZENER VOLTAGE (V)
11
12
TYPICAL TC VALUES
FOR MMSZ5221BT1 SERIES
VZ @ IZT
10
1
10
100
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 1. Temperature Coefficients
(Temperature Range − 55°C to +150°C)
Figure 2. Temperature Coefficients
(Temperature Range − 55°C to +150°C)
1.2
Ppk, PEAK SURGE POWER (WATTS)
1000
1.0
PD versus TL
0.8
0.6
100
PD versus TA
0.4
0.2
0
0
25
RECTANGULAR
WAVEFORM, TA = 25°C
50
75
100
T, TEMPERATURE (°C)
125
10
1
150
Figure 3. Steady State Power Derating
1
1000
1000
TJ = 25°C
IZ(AC) = 0.1 IZ(DC)
f = 1 kHz
IF, FORWARD CURRENT (mA)
IZ = 1 mA
100
75 V (MMSZ5267BT1)
91 V (MMSZ5270BT1)
100
5 mA
20 mA
10
10
150°C
1
10
100
PW, PULSE WIDTH (ms)
Figure 4. Maximum Nonrepetitive Surge Power
1000
ZZT, DYNAMIC IMPEDANCE ()
0.1
75°C 25°C
0°C
1
1
10
VZ, NOMINAL ZENER VOLTAGE
100
0.4
Figure 5. Effect of Zener Voltage on
Zener Impedance
0.5
0.6
0.7
0.8
0.9
1.0
VF, FORWARD VOLTAGE (V)
Figure 6. Typical Forward Voltage
http://onsemi.com
4
1.1
1.2
MMSZ5221BT1 Series
IR, LEAKAGE CURRENT (A)
TYPICAL CHARACTERISTICS
1000
TA = 25°C
C, CAPACITANCE (pF)
0 V BIAS
1 V BIAS
100
BIAS AT
50% OF VZ NOM
10
1
1
10
VZ, NOMINAL ZENER VOLTAGE (V)
100
1000
100
10
1
+150°C
0.1
0.01
0.001
+ 25°C
0.0001
−55°C
0.00001
0
10
Figure 7. Typical Capacitance
20
30
40
50
60
70
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 8. Typical Leakage Current
100
100
TA = 25°C
IZ, ZENER CURRENT (mA)
IZ, ZENER CURRENT (mA)
TA = 25°C
10
1
0.1
0.01
80
10
1
0.1
0.01
0
2
4
6
8
VZ, ZENER VOLTAGE (V)
10
10
12
30
50
70
VZ, ZENER VOLTAGE (V)
90
Figure 10. Zener Voltage versus Zener Current
(12 V to 91 V)
Figure 9. Zener Voltage versus Zener Current
(VZ Up to 12 V)
http://onsemi.com
5
90
MMSZ5221BT1 Series
PACKAGE DIMENSIONS
SOD−123
CASE 425−04
ISSUE C
A
ÂÂÂÂ
ÂÂÂÂ
C
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
H
1
K
DIM
A
B
C
D
E
H
J
K
B
E
2
MILLIMETERS
MIN
MAX
1.40
1.80
2.55
2.85
0.95
1.35
0.50
0.70
0.25
−−−
0.00
0.10
−−−
0.15
3.55
3.85
STYLE 1:
PIN 1. CATHODE
2. ANODE
J
D
INCHES
MIN
MAX
0.055
0.071
0.100
0.112
0.037
0.053
0.020
0.028
0.01
−−−
0.000
0.004
−−−
0.006
0.140
0.152
SOLDERING FOOTPRINT*
ÉÉÉ
ÉÉÉ
ÉÉÉ
0.91
0.036
2.36
0.093
4.19
0.165
ÉÉÉ
ÉÉÉ
ÉÉÉ
SCALE 10:1
1.22
0.048
mm inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
6
For additional information, please contact your
local Sales Representative.
MMSZ5221BT1/D
Similar pages