Fairchild MOC8104300 6-pin dip optocouplers for power supply application Datasheet

6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
PACKAGE
SCHEMATIC
1
NC
2
6
6
5
6
3
NC
4
1
PIN 1. ANODE
2. CATHODE
3. NO CONNECTION
4. EMITTER
5. COLLECTOR
6. NO CONNECTION
1
6
1
FEATURES
The MOC810X and CNY17F-X devices consist of a gallium arsenide LED optically coupled to a silicon phototransistor in a dual-inline package.
•
•
•
•
Closely Matched Current Transfer Ratio (CTR) Minimizes Unit-to-Unit Variation
Narrow (CTR) Windows that Translate to a Narrow and Predictable Open Loop Gain Window
Very Low Coupled Capacitance along with No Chip to Pin 6 Base Connection for Minimum Noise Susceptibility
To order devices that are tested and marked per VDE 0884 requirements, the suffix “.300” must be included at the end
of part number. e.g. MOC8101.300 VDE 0884 is a test option.
APPLICATIONS
• Switchmode Power Supplies (Feedback Control)
• AC Line/Digital Logic Isolation
• Interfacing and coupling systems of different potentials and impedances
© 2004 Fairchild Semiconductor Corporation
Page 1 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
ABSOLUTE MAXIMUM RATINGS (TA =25°C Unless otherwise specified)
Parameter
Symbol
Value
Unit
IF
100
mA
IF(pk)
1
A
VR
6
Volts
INPUT LED
Forward Current - Continuous
Forward Current - Peak (PW = 1µs, 300pps)
Reverse Voltage
LED Power Dissipation @ TA = 25°C
PD
Derate above 25°C
150
mW
2.0
mW/°C
OUTPUT TRANSISTOR
Collector-Emitter Voltage
MOC8106/7/8, CNY17F-1/2/3/4
VCEO
MOC8101/2/3/4/5
Emitter-Collector Voltage
VECO
Detector Power Dissipation @ TA = 25°C
PD
Derate above 25°C
70
30
Volts
7
Volts
150
mW
2.0
mW/°C
5300
Vac(rms)
TOTAL DEVICE
Input-Output Isolation Voltage
VISO
(f = 60 Hz, t = 1 min.)
Total Device Power Dissipation @ TA = 25°C
PD
Derate above 25°C
250
mW
3.3
mW/°C
Ambient Operating Temperature Range
TOPR
-55 to +100
°C
Storage Temperature Range
TSTG
-55 to +150
°C
TSOL
260
°C
Lead Soldering Temperature
(1/16” from case, 10 sec. duration)
© 2004 Fairchild Semiconductor Corporation
Page 2 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
ELECTRICAL CHARACTERISTICS (TA =25°C Unless otherwise specified)(1)
Characteristic
Symbol
Min
Typ**
Max
Unit
VF
—
1.40
1.65
V
1.0
1.18
1.5
INPUT LED
Forward Voltage
(IF = 60 mA)
CNY17F-X
(IF = 10 mA)
MOC810X
Reverse Leakage Current (VR = 5.0 V)
IR
—
0.001
10
µA
Capacitance
C
—
18
—
pF
(VCE = 10 V, TA = 25°C)
ICEO1
—
1.0
50
nA
(VCE = 10 V, TA = 100°C)
ICEO2
—
1.0
—
µA
30
100
—
70
100
—
V(BR) ECO
7.0
10
—
V
CCE
—
8
—
pF
MOC8101
50
—
80
MOC8102
73
—
117
MOC8103
108
—
173
MOC8104
160
—
256
MOC8105
65
—
133
50
—
150
100
—
300
MOC8108
250
—
600
CNY17F-1
40
—
80
CNY17F-2
63
—
125
CNY17F-3
100
—
200
CNY17F-4
160
—
320
VCE(sat)
—
—
0.4
V
OUTPUT TRANSISTOR
Collector-Emitter Dark Current
Collector-Emitter Breakdown Voltage
MOC8101/2/3/4/5
(IC = 1.0 mA)
MOC8106/7/8, CNY17F-1/2/3/4
(IC = 1.0 mA)
Emitter-Collector Breakdown Voltage
(IE = 100 µA)
Collector-Emitter Capacitance
V(BR) CEO
(f = 1.0 MHz, VCE = 0)
V
COUPLED
Output Collector Current
(IF = 10 mA, VCE = 10 V)
MOC8106
MOC8107
(IF = 10 mA, VCE = 5 V)
(CTR)(2)
%
Collector-Emitter Saturation Voltage
CNY17F-1/2/3/4
(IC = 2.5 mA, IF = 10 mA)
MOC8101/2/3/4/5/6/7/8
(IC = 500 µA, IF = 5.0 mA)
Isolation Voltage
Isolation Resistance
Isolation Capacitance
(f = 60 Hz, t = 1.0 min.)(4)
(VI-O =
VISO
5300
—
—
Vac(rms)
500 V)(4)
RISO
1011
—
—
Ω
MHz)(4)
CISO
—
0.5
—
pF
(VI-O = 0, f = 1.0
** All typicals at TA = 25°C
© 2004 Fairchild Semiconductor Corporation
Page 3 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
TRANSFER CHARACTERISTICS (TA =25°C Unless otherwise specified)
AC Characteristic
Test Conditions Symbol
Min
Typ**
Max
Unit
µs
NON-SATURATED SWITCHING TIME
Turn-on Time CNY17F-1/2/3/4 Only
(RL = 100 Ω, IC = 2 mA)
ton
—
2
10
Turn-off Time CNY17F-1/2/3/4 Only
(VCC = 10 V)
toff
—
3
10
(IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)(3)
ton
—
2
Turn-On Time
MOC8101-5
MOC8106-8
Turn-Off Time
MOC8101-5
MOC8106-8
(IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)(3)
Rise Time
All Devices
(IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)(3)
Fall Time
All Devices
(IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)(3)
20
—
20
toff
—
3
tr
—
1
—
tf
—
2
—
—
—
5.5
µs
—
µs
SATURATED SWITCHING TIMES
Turn-on Time
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
Rise Time
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
Turn-off Time
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
Fall Time
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
** All typicals at TA = 25°C
(IF = 20 mA, VCE = 0.4 V)
ton
µs
(IF = 10 mA, VCE = 0.4 V)
—
—
8.0
(IF = 20 mA, VCE = 0.4 V)
—
—
4.0
tr
µs
(IF = 20 mA, VCE = 0.4 V)
(IF = 20 mA, VCE = 0.4 V)
—
—
34
toff
µs
(IF = 10 mA, VCE = 0.4 V)
—
—
39
(IF = 20 mA, VCE = 0.4 V)
—
—
20
tf
(IF = 10 mA, VCE = 0.4 V)
µs
—
—
24
NOTES:
1. Always design to the specified minimum/maximum electrical limits (where applicable).
2. Current Transfer Ratio (CTR) = IC/IF x 100%.
3. For test circuit setup and waveforms, refer to Figure 11.
4, For this test, Pins 1 and 2 are common, and Pins 4 are 5 are common.
© 2004 Fairchild Semiconductor Corporation
Page 4 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
TYPICAL PERFORMANCE CURVES
Fig. 1 LED Forward Voltage vs. Forward Current
Fig. 2 Normalized CTR vs. Forward Current
1.8
1.4
TA = 25°C
VCE = 5.0 V
Normalized to
IF = 10 mA
1.2
1.6
1.0
NORMALIZED CTR
VF - FORWARD VOLTAGE (V)
1.7
1.5
TA = -55°C
1.4
1.3
1.2
0.8
0.6
0.4
TA = 25°C
0.2
1.1
TA = 100°C
1.0
0.0
1
10
100
0
IF - LED FORWARD CURRENT (mA)
5
10
15
20
IF - FORWARD CURRENT (mA)
Fig. 3 Normalized CTR vs. Ambient Temperature
Fig. 4 CTR vs. RBE (Saturated)
1.6
1.0
0.9
IF = 5 mA
0.8
NORMALIZED CTR
NORMALIZED CTR
1.4
1.2
IF = 10 mA
1.0
IF = 20 mA
0.7
0.6
IF = 10 mA
0.5
0.4
0.8
0.3
IF = 20 mA
0.6
0.4
-75
IF = 5 mA
0.2
Normalized to
IF = 10 mA
TA = 25°C
TA = 25°C
VCE = 0.3 V
Normalized to CTR @ RBE = Open
0.1
0.0
-50
-25
0
25
50
75
100
125
10
TA - AMBIENT TEMPERATURE (°C)
© 2004 Fairchild Semiconductor Corporation
100
1000
RBE - BASE RESISTANCE (kΩ)
Page 5 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
TYPICAL PERFORMANCE CURVES (continued)
Fig. 6 Collector Emitter Saturation Voltage
vs Collector Current
VCE (sat) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)
Fig. 5 CTR vs. RBE (Unsaturated)
1.0
0.9
NORMALIZED CTR
0.8
IF = 20 mA
0.7
0.6
IF = 10 mA
0.5
0.4
IF = 5 mA
0.3
0.2
TA = 25°C
VCE = 5.0 V
Normalized to CTR @ RBE = Open
0.1
0.0
10
100
1000
RBE - BASE RESISTANCE (kΩ)
100
10
1
IF = 2.5 mA
0.1
IF = 5 mA
IF = 10 mA
TA = 25°C
0.001
0.01
0.1
1
10
IC - COLLECTOR CURRENT (mA)
Fig. 7 Normalized ton vs. RBE
Fig. 8 Normalized toff vs. RBE
6.0
1.4
5.5
1.3
5.0
1.2
VCC = 10 V
IC = 2 mA
RL = 100 Ω
Normalized to toff@ RBE = Open
1.1
4.5
1.0
4.0
NORMALIZED toff
NORMALIZED ton
IF = 20 mA
0.01
3.5
3.0
2.5
2.0
1.5
0.9
0.8
0.7
0.6
0.5
0.4
VCC = 10 V
IC = 2 mA
RL = 100 Ω
Normalized to ton@ RBE = Open
1.0
0.5
0.3
0.2
0.1
0.0
10
100
1000
10
10000
1000
10000
RBE - BASE RESISTANCE (kΩ)
RBE - BASE RESISTANCE (kΩ)
© 2004 Fairchild Semiconductor Corporation
100
Page 6 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
TYPICAL PERFORMANCE CURVES (continued)
Fig. 9 Switching Speed vs. Load Resistor
Fig. 10 Dark current vs. Ambient Temperature.
1000
ICEO - COLLECTOR-EMITTER DARK CURRENT (µA)
1e+1
SWITCHING SPEED - (µs)
IF = 10 mA
VCC = 10 V
TA = 25°C
100
Toff
Tf
10
Ton
1
Tr
0.1
VCE = 10V
1e+0
1e-1
1e-2
1e-3
1e-4
1e-5
1e-6
0.1
1
10
100
0
R-LOAD RESISTOR (kΩ)
© 2004 Fairchild Semiconductor Corporation
25
50
75
100
125
TA - AMBIENT TEMPERATURE (°C)
Page 7 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
Figure 11. Switching Time Test Circuit and Waveforms
TEST CIRCUIT
WAVE FORMS
VCC = 10V
INPUT PULSE
IF
IC
INPUT
RL = 100Ω
10%
OUTPUT
OUTPUT PULSE
90%
tr
ton
tf
toff
Adjust IF to produce IC = 2 mA
© 2004 Fairchild Semiconductor Corporation
Page 8 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
Package Dimensions (Through Hole)
MOC8104
MOC8108
CNY17F-4
Package Dimensions (Surface Mount)
0.350 (8.89)
0.330 (8.38)
PIN 1
ID.
3
2
PIN 1
ID.
1
0.270 (6.86)
0.240 (6.10)
SEATING PLANE
0.270 (6.86)
0.240 (6.10)
0.350 (8.89)
0.330 (8.38)
4
0.070 (1.78)
0.045 (1.14)
5
6
0.300 (7.62)
TYP
0.070 (1.78)
0.045 (1.14)
0.200 (5.08)
0.135 (3.43)
0.200 (5.08)
0.165 (4.18)
0.020 (0.51)
MIN
0.154 (3.90)
0.100 (2.54)
0.016 (0.41)
0.008 (0.20)
0.020 (0.51)
MIN
0.022 (0.56)
0.016 (0.41)
0.100 (2.54)
TYP
0.016 (0.40)
0.008 (0.20)
0.022 (0.56)
0.016 (0.41)
0° to 15°
0.016 (0.40) MIN
0.315 (8.00)
MIN
0.405 (10.30)
MAX
0.300 (7.62)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
0.100 (2.54)
TYP
Package Dimensions (0.4” Lead Spacing)
Recommended Pad Layout for
Surface Mount Leadform
0.070 (1.78)
0.270 (6.86)
0.240 (6.10)
0.060 (1.52)
SEATING PLANE
0.350 (8.89)
0.330 (8.38)
0.415 (10.54)
0.070 (1.78)
0.045 (1.14)
0.100 (2.54)
0.295 (7.49)
0.030 (0.76)
0.200 (5.08)
0.135 (3.43)
0.154 (3.90)
0.100 (2.54)
0.004 (0.10)
MIN
0.016 (0.40)
0.008 (0.20)
0° to 15°
0.022 (0.56)
0.016 (0.41)
0.100 (2.54) TYP
0.400 (10.16)
TYP
NOTE
All dimensions are in inches (millimeters)
© 2004 Fairchild Semiconductor Corporation
Page 9 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
ORDERING INFORMATION
Option
Order Entry Identifier
Description
.S
Surface Mount Lead Bend
SD
.SD
Surface Mount; Tape and Reel
W
.W
0.4" Lead Spacing
.300
VDE 0884
.300W
VDE 0884, 0.4" Lead Spacing
S
300
300W
3S
3SD
.3S
VDE 0884, Surface Mount
.3SD
VDE 0884, Surface Mount, Tape and Reel
MARKING INFORMATION
1
MOC8101
2
V XX YY K
6
3
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
Two digit year code, e.g., ‘03’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
© 2004 Fairchild Semiconductor Corporation
Page 10 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
Carrier Tape Specifications (“D” Taping Orientation)
12.0 ± 0.1
4.85 ± 0.20
4.0 ± 0.1
Ø1.55 ± 0.05
4.0 ± 0.1
0.30 ± 0.05
1.75 ± 0.10
7.5 ± 0.1
13.2 ± 0.2
9.55 ± 0.20
Ø1.6 ± 0.1
10.30 ± 0.20
0.1 MAX
16.0 ± 0.3
User Direction of Feed
NOTE
All dimensions are in inches (millimeters)
Reflow Profile (Black Package, No Suffix)
Temperature (°C)
300
215°C, 10–30 s
250
225 C peak
200
150
Time above 183°C, 60–150 sec
100
50
Ramp up = 3C/sec
• Peak reflow temperature: 225°C (package surface temperature)
• Time of temperature higher than 183°C for 60–150 seconds
• One time soldering reflow is recommended
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
© 2004 Fairchild Semiconductor Corporation
Page 11 of 12
1/21/04
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
© 2004 Fairchild Semiconductor Corporation
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
Page 12 of 12
1/21/04
Similar pages