MP25005W THRU MP2510W SILICON BRIDGE RECTIFIERS Reverse Voltage - 50 to 1000 Volts KBPC-25W FEATURES 0.452 (11.5) MAX. 0.591 (15.0) MAX. The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds,5 lbs. (2.3kg) tension 0.042(1.10) DIA. 0.038(0.97) 1.181(30.0) 1.102(28.0) 0.673(17.1) Forward Current - 25.0 Amperes HOLE FOR NO.8 SCREW 0.633(16.1) MECHANICAL DATA 1.181(30.0) AC + 0.732(18.6) Case: Metal case Terminals: Lead 0.040” (1.02mm) diameter. Polarity: Polarity symbols marked on case Mounting:Thru hole for #8 screw,20in.-lbs. torque max. Weight:0.93 ounce, 26.4 grams 1.102(28.0) 0.468(11.9) 0.692(17.6) 0.429(10.9) - AC 0.732(18.6) 0.692(17.6) 0.033x.250 (0.8x6.4) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase,half wave 60Hz,resistive or inductive load,for current capacitive load, derate by 20%. MDD Catalog Number Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current at TC=50 C (Note 1,2) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for Fusing(t<8.3ms) Maximum instantaneous forward voltage dorp per bridge element at 12.5A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Isolation voltage from case to leads Typical Thermal Resistance (Note 2) Operating junction temperature range storage temperature range SYMBOLS VRRM VRMS VDC MP 25005W 50 35 50 MP 2501W 100 70 100 MP 2502W 200 140 200 MP 2504W MP 2506W 400 280 400 600 420 600 MP 2508W 800 560 800 MP 2510W UNITS 1000 VOLTS 700 VOLTS 1000 VOLTS I(AV) 25 Amps IFSM 300.0 Amps I2t 373 A2s VF 1.1 Volts IR 10 1.0 2500 2.0 -65 to +150 -65 to +150 µA mA VISO RθJA TJ TSTG VAC C/W C C NOTES: 1.Unit mounted on 5” x 6” x4.9” thick(12.8cmx15.2cmx12.4cmcm)Al.plate. 2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #8 screw. ２０１４－０３ ０１版 ｈｔｔｐ：／／ｗｗｗ．ｍｉｃｒｏｄｉｏｄｅ．ｃｏｍ FIG. 1- FORWARD CURRENT DERATING CURVE 25 20 15 Single Phase Half Wave 60Hz Resistive or inductive Load 10 5 0 0 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RATINGS AND CHARACTERISTIC CURVES MP25005W THRU MP2510W FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 300 250 200 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 175 50 1 10 AMBIENT TEMPERATURE, C 200 100 10 TJ=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE 0.1 0.6 0.8 1.0 1.2 1.4 1.5 FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1 1,000 100 TJ=100 C 10 1 0.01 0 20 40 60 80 100 2000 TJ=25 C 100 TRANSIENT THERMAL IMPEDANCE, C/W PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF TJ=25 C 0.1 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1000 100 NUMBER OF CYCLES AT 60 Hz FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE 10 1 0.1 0.01 0.01 0.1 1 10 100 10 0.1 1.0 10 REVERSE VOLTAGE,VOLTS ２０１４－０３ ０１版 100 t,PULSE DURATION,sec. ｈｔｔｐ：／／ｗｗｗ．ｍｉｃｒｏｄｉｏｄｅ．ｃｏｍ