CREE MPLEZW-A1-0000-0000B030F Creeâ® xlampâ® mp-l easywhiteâ ¢ led Datasheet

Binning & Labeling Document
CLD-26 Rev 3
Product family data sheet /
Cree® XLamp® MP-L EasyWhite™ LEDs
Product Description
FEATURES
The XLamp MP-L EasyWhite LED
•
eliminates
traditional
chromatic-
ity binning and maximizes lumen
density, enabling luminaire and
bulb retrofit manufacturers to deliver consistent color and required
•
High lumen density
•
Wide viewing angle: 125°
•
Minimum 80 CRI at 2700 K
•
around the desired color tempera-
Relative Luminous Flux vs Current
and Solder Point Temperature
(Steady-State Conditions)........... 4
RoHS-compliant
Typical Spatial Distribution........... 4
ture, which is 94% smaller than
Reflow Soldering Characteristics... 5
the total area of the corresponding
Bin and Order-Code Format......... 6
ANSI C78.377 color region.
The XLamp MP-L EasyWhite LED is
the perfect choice for lighting applications where high luminous flux
output is required from a single,
small point source. Examples of
WWW.CREE.COM/XLAMP
Electrically neutral thermal
path
•
Product
Characteristics.
...............
2
Label
with
Cree
Bin
Code,
Qty,Flux
LotCharacteristics
#.......................................
@ 150 mA
10
= 25°C)...............................
(TJ with
Label
Customer Order Code,...2
10 Relative Spectral Power Distribution
Qty,(IReel
ID,mA
PO#...........................
= 150
per LED)................ 3
10 F
Electrical Characteristics
(TJ = 25°C)............................... 3
and 3000 K CCT
reduce LED-to-LED color variation
to within a 2-step MacAdams ellipse
Cree EasyWhite color
temperatures
light output to the target end user.
XLamp MP-L EasyWhite LEDs can
TABLE OF CONTENTS
Performance Groups –
Applications
•
Commercial/residential
Brightness................................. 7
direc-
Performance Groups –
tional lighting
Chromaticity.............................. 7
•
LED retrofit bulbs
Cree EasyWhite Color
•
General indoor/outdoor illumi-
Temperatures Plotted on the 1931
nation
CIE Curve.................................. 8
specific applications include: com-
Standard Order Codes and Bins
mercial/retail
spotlights,
(MP-L EasyWhite)....................... 9
LED retrofit bulbs, and other indoor
Notes...................................... 10
general illumination applications.
Mechanical Dimensions............. 12
display
Tape and Reel.......................... 13
Packaging................................ 14
Label with Cree Bin Code,
Qty, Lot #..................................
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
XLAMP MP-L EASYWHITE LEDS
Product Characteristics
Characteristics
Unit
Solder Point Temperature
Minimum
Typical
Maximum
°C
Viewing Angle (FWHM) - white
Temperature Coefficient of Voltage (per LED string)
110
degrees
125
mV/°C
-30
ESD Classification (HBM per Mil-Std-883D)
Class 2
Total Power, all strings @ 150 mA
W
11.3
Total Power, all strings @ 250 mA
W
19.9
DC Forward Current, per LED string
mA
250
Reverse Current, per LED string
mA
0.1
Forward Voltage @ 150 mA, per LED string
V
25.0
26.0
Forward Voltage @ 250 mA, per LED string
V
26.5
27.5
Moisture Sensitivity Level Rating (MSL)
MSL 2A
Flux Characteristics @ 150 mA (TJ = 25°C)
The following table provides several base order codes for XLamp MP-L EasyWhite LEDs. For additional order codes, as
well as a complete description of the order-code nomenclature, please reference pages 6 through 9 of this document.
Color
CCT
Range
4,000 K
3,500 K
EasyWhite
4-Step
3,000 K
2,700 K
Color
CCT
Range
4,000 K
3,500 K
EasyWhite
2-Step
3,000 K
2,700 K
Base Order Codes
Min Luminous Flux (lm)
Order Code
Group
Flux (lm)
D0
900
MPLEZW-A1-0000-0000D040F
E0
1000
MPLEZW-A1-0000-0000E040F
B0
700
MPLEZW-A1-0000-0000B035F
C0
800
MPLEZW-A1-0000-0000C035F
B0
700
MPLEZW-A1-0000-0000B030F
C0
800
MPLEZW-A1-0000-0000C030F
B0
700
MPLEZW-A1-0000-0000B027F
C0
800
MPLEZW-A1-0000-0000C027F
Base Order Codes
Min Luminous Flux (lm)
Notes:
•
flux and power measurements.
•
•
Flux (lm)
D0
900
MPLEZW-A1-0000-0000D040H
E0
1000
MPLEZW-A1-0000-0000E040H
B0
700
MPLEZW-A1-0000-0000B035H
C0
800
MPLEZW-A1-0000-0000C035H
B0
700
MPLEZW-A1-0000-0000B030H
C0
800
MPLEZW-A1-0000-0000C030H
B0
700
MPLEZW-A1-0000-0000B027H
C0
800
MPLEZW-A1-0000-0000C027H
Minimum CRI for EasyWhite color temperatures 27F, 27H, 30F, 30H is 80.
Order Code
Group
Cree maintains a tolerance of ±7% on
Minimum CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 77.
•
Typical CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 80.
•
Cree maintains a tolerance of ±2 on CRI
measurements.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
2
XLAMP MP-L EASYWHITE LEDS
Relative Spectral
Distribution
(I = (If
150=mA
per
LED)
Relative
SpectralPower
Power
Distribution
150
mA)
F
The following graph represents typical spectral output of the XLamp MPL-EZW LED.
The following graph represents typical spectral output of the XLamp MP-L EasyWhite LED with all LEDs on simultane-
ously.
Relative Radiant Power (%)
100
80
60
40
20
0
400
450
500
550
600
650
700
750
Wavelength (nm)
Electrical Characteristics (Tj = 25ºC)
The
following graphCharacteristics
represents typical electrical(T
characteristics
Electrical
= 25°C) of each of the three individual strings of the XLamp MPL-EZW LED.
J
The following graph represents typical electrical characteristics of an individual string of XLamp MP-L EasyWhite LEDs.
Relative
Flux Output vs. Junction Temperature (If = 150 mA)
250
Forward Current (mA)
200
150
100
50
0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
Forward Voltage (V)
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
3
XLAMP MP-L EASYWHITE LEDS
Relative Luminous Flux vs Current and Solder Point Temperature
(Steady-State Conditions)
The data below is representative of the XLamp MP-L EasyWhite in steady-state operation with all strings driven equally
at the current shown. The relative luminous flux is shown as a percentage of the light output under pulsed test conditions
(t=20 ms, If=150 mA, Tsp=Tj=25°C). The XLamp MP-L EasyWhite LED is binned under these pulsed test conditions.
140
Luminous Flux, Relative to Pulsed (%)
120
100
80
150 mA
200 mA
60
250 mA
40
20
0
5
15
25
35
45
55
65
75
85
95
105
Steady-State Solder Point Temperature (°C)
Radiation
Typical Typical
SpatialSpatial
Distribution
Pattern (If = 150 mA)
Typical Spatia
The following graph represents typical output of the XLamp MPL-EZW LED.
The following graph repres
120
Relative Luminous Intensity (%)
100
80
60
40
20
0
-90
-60
-30
0
30
60
90
Angle (º)
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
4
XLAMP MP-L EASYWHITE LEDS
Reflow Soldering Characteristics
In testing, Cree has found XLamp MP-L EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters
listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by
the manufacturer of solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature
Lead-Based Solder
Lead-Free Solder
3°C/second max.
3°C/second max.
Preheat: Temperature Min (Tsmin)
100°C
150°C
Preheat: Temperature Max (Tsmax)
150°C
200°C
60-120 seconds
60-180 seconds
183°C
217°C
60-150 seconds
60-150 seconds
215°C
260°C
10-30 seconds
20-40 seconds
6°C/second max.
6°C/second max
6 minutes max.
8 minutes max.
Average Ramp-Up Rate (Tsmax to Tp)
Preheat: Time (tsmin to tsmax)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
Peak/Classification Temperature (Tp)
Time Within 5°C of Actual Peak Temperature (tp)
Ramp-Down Rate
Time 25°C to Peak Temperature
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
5
XLAMP MP-L EASYWHITE LEDS
Bin and Order-Code Format
Bin codes and order codes are configured in the following manner:
Order Code
Bin Code
Series
MPL
Version number
Series
MPL
Version number
Kit number
Flux code
SSSSSS-BB-NNN-FF-HH-HHHH
SSSSSS-BB-HHHH-NNNNNNNNN
Internal code
Color
EZW = EasyWhite
Internal code
Chromaticity code
Color
EZW = EasyWhite
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
6
XLAMP MP-L EASYWHITE LEDS
Performance Groups – Brightness
XLamp MP-L EasyWhite LEDs are tested for luminous flux and placed into one of the following luminous-flux groups:
Group Code
Min. Luminous Flux
@ 150 mA per
string (lm)
Max. Luminous Flux
@ 150 mA per
string (lm)
A0
600
700
800
B0
700
C0
800
900
D0
900
1000
E0
1000
1100
F0
1100
1200
Performance Groups – Chromaticity
XLamp MP-L EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following
bounding coordinates.
EasyWhite Color Temperatures – 4-Step
EasyWhite Color Temperatures – 2-Step
Code
Code
40F
35F
30F
27F
CCT
4000 K
3500 K
3000 K
2700 K
x
y
0.3744
0.3685
0.3782
0.3837
0.3912
0.3917
x
y
0.3784
0.3741
0.3804
0.3818
0.3867
0.3857
0.3863
0.3981
0.3758
0.3844
0.3778
0.3800
0.4030
0.3857
0.4040
0.3966
0.4061
0.3941
0.4186
0.4037
0.4132
0.3976
0.4116
0.3865
0.4099
0.3890
0.4242
0.3919
0.4291
0.3973
0.4322
0.4096
0.4333
0.4062
0.4449
0.4141
0.4395
0.4084
0.4359
0.3960
0.4351
0.3994
0.4475
0.3994
0.4528
0.4046
0.4573
0.4178
0.4578
0.4138
0.4695
0.4207
0.4638
0.4152
0.4589
0.4021
0.4586
0.4060
40H
35H
30H
27H
CCT
4000 K
3500 K
3000 K
2700 K
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
7
XLAMP MP-L EASYWHITE LEDS
Cree EasyWhite Color Temperatures Plotted on the 1931 CIE Curve
0.45
0.44
0.43
3000K
3500K
0.42
4000K
0.41
CCy
2700K
ANSI C78.377 Quadrangle
EasyWhite "F" (4-Step) Chromaticity Regions
4500K
27F
0.40
30F
0.39
35F
0.38
40F
0.37
0.36
0.45
0.43
0.49
0.48
0.47
0.46
0.45
0.44
0.43
CCx
2700K
ANSI C78.377 Quadrangle
EasyWhite "H" (2-Step) Chromaticity Regions
0.44
3000K
3500K
0.42
4000K
0.41
CCy
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
27H
4500K
30H
0.40
35H
0.39
0.38
40H
0.37
0.36
0.49
0.48
0.47
0.46
0.45
0.44
CCx
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
8
XLAMP MP-L EASYWHITE LEDS
Standard Order Codes and Bins (MP-L EasyWhite)
The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s
chromaticity regions and luminous flux range.
XLamp MP-L EasyWhite LED Standard Order Codes
Min. Luminous Flux (lm)
@ 150 mA*
Group
Flux (lm)
Chromaticity
Regions
Kit Number
EasyWhite
B0
C0
700
800
D0
900
E0
1000
27F
0000B027F
27H
0000B027H
30F
0000B030F
30H
0000B030H
35F
0000B035F
35H
0000B035H
27F
0000C027F
27H
0000C027H
30F
0000C030F
30H
0000C030H
35F
0000C035F
35H
0000C035H
40F
0000D040F
40H
0000D040H
40F
0000E040F
40H
0000E040H
For other flux and chromaticity combinations, contact Cree or an authorized distributor.
* Cree XLamp MP-L EasyWhite order codes specify only a minimum flux bin and not a maximum. Cree may ship reels
in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere
to the chromaticity or DWL bin restrictions specified by the order code.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
9
XLAMP MP-L EASYWHITE LEDS
Notes
Lumen Maintenance Projections
Based on internal long-term reliability testing, Cree projects XLamp MP-L EasyWhite LEDs to maintain a mean 70%
lumen maintenance after 50,000 hours at maximum rated drive current, provided the LED solder point temperature is
maintained at or below 85°C.
Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance
testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design,
ambient temperature, and drive current affect the LED junction temperature.
Moisture Sensitivity
XLamp MP-L EasyWhite LEDs are shipped in sealed, moisturebarrier bags (MBB) designed for long shelf life. If XLamp MP-L
Temp.
EasyWhite LEDs are exposed to moist environments after open-
Maximum Percent Relative Humidity
30%
40%
50%
60%
70%
80%
90%
35ºC
-
-
-
17
1
.5
.5
ing the MBB packaging but before soldering, damage to the
30ºC
-
-
-
28
1
1
1
LED may occur during the soldering operation. The following
25ºC
-
-
-
-
2
1
1
derating table defines the maximum exposure time (in days)
20ºC
-
-
-
-
2
1
1
for an XLamp MP-L EasyWhite LED in the listed humidity and
temperature conditions. LEDs with exposure time longer than the time specified below must be baked according to the
baking conditions listed below.
Baking Conditions
It is not necessary to bake all XLamp MP-L EasyWhite LEDs. Only the LEDs that meet all of the following criteria must
be baked:
1.
LEDs that have been removed from the original MBB packaging
2.
LEDs that have been exposed to a humid environment longer than listed in the Moisture Sensitivity section above
3.
LEDs that have not been soldered
LEDs should be baked at 80ºC for 24 hours. LEDs may be baked on the original reels. Remove LEDs from MBB packaging
before baking. Do not bake parts at temperatures higher than 80ºC. This baking operation resets the exposure time as
defined in the Moisture Sensitivity section above.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
10
XLAMP MP-L EASYWHITE LEDS
Storage Conditions
XLamp MP-L EasyWhite LEDs that have been removed from the original MBB packaging but not soldered should be
stored in one of the following ways:
•
Store the parts in a rigid metal container with a tight-fitting lid. Verify that the storage temperature is <30°C, and
place fresh desiccant and an RH indicator in the container to verify that the RH is no greater than 60%.
•
Store the parts in a dry, nitrogen-purged cabinet or container that actively maintains the temperature at <30° and
the RH at no greater than 60%.
•
For short-term store only: LEDs can be resealed in the original MBB bag soon after opening. Fresh desiccant may be
needed. Use the included humidity indicator card to verify <60% RH.
If an environment of <60% RH is not available for storage, XLamp MP-L EasyWhite LEDs should be baked (described
above) before reflow soldering.
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
WARNING. Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye
safety, please refer to the Cree LED Eye Safety application note.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
11
XLAMP MP-L EASYWHITE LEDS
Mechanical Dimensions
All measurements are ±.13 mm unless otherwise indicated.
6
5
4
3
2
1
REVISONS
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
REV
B
DESCRIPTION
BY
DATE
ADDED TOLERANCE TO DOME
DC
9/9/10
APP'D
D
D
6.1
±0.25
12.15
6.075
11.3
0.7250
C
13.15
C
12.3
13.15
7.075
BK BA CK
CA RK RA
1.275
11
5
11.4
CONTACT PADS
SIZE: 0.70 X 0.85
PITCH: 1.25
12.15
SIDE VIEW
BOTTOM VIEW
TOP VIEW
B
B
CATHODE(-): BK, CK, RK
ANODE(+): BA, CA, RA
A
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
SURFACE FINISH: 1.6
6
5
4
3
DATE
DRAWN BY
D. CRONIN
CHECK
4600 Silicon Drive
Durham, N.C 27703
05/13/09
DATE
--
Phone (919) 313-5300
--
Fax (919) 313-5558
A
DATE
APPROVED
--
--
MATERIAL
--
TITLE
MXP LAMP PRODUCT OUTLINE
SIZE
FINAL PROTECTIVE FINISH
-2
SCALE
C
7.000
REV.
DRAWING NO.
2601-00004
SHEET
BOF
1 /1
1
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
12
XLAMP MP-L EASYWHITE LEDS
Tape and Reel
All dimensions in mm.
6
5
4
3
2
1
2400-00009
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTANED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
INDEX
QTY
ITEM
1
2
1
2
2400-00009-CORE
2400-00009-REEL
COMMENTS
D
D
12.4
+.2
.0
MEASURED AT HUB
C
330
+.25
-.75
C
16.4
+0.2
.0
MEASURED AT HUB
1.9±.4
21 ±.4
13.1 ±.2
B
B
12.4
+1.0
-.5
MEASURED AT EDGE
60°
60°
REVISONS
REV
A
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.01
.XXX ±
.005
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
.X
±
.06
.XX ±
.03
.XXX ±
.010
X°
±
.5 °
BY
DESCRIPTION
DRAWN BY
D. CRONIN
CHECK
APPROVED
--
APP'D
4600 Silicon Drive
Durham, N.C 27703
09/29/09
DATE
--
DATE
DATE
Phone (919) 313-5300
--
Fax (919) 313-5558
A
DATE
--
MATERIAL
ANTI-STATIC HIPS
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
SIZE
DRAWING NO.
2400-00009
C registered
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are
trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree,
Cree logo and
registered trademarks
63
of Cree, Inc.
SURFACE
FINISH: the
- XLamp are
0.500
of Cree, Inc.
6
5
4
3
2
1
FINAL PROTECTIVE FINISH
SCALE
SHEET
OF
13
REV.
A
1 /1
Dessicant
Desiccant
XLAMP MP-L
EASYWHITE LEDS
(inside
bag)
(inside bag)
Humidity
Indicator
Humidity
Indicator
Card (inside
bag)bag)
(inside
Packaging
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Label Bin
with
Cree Bin
CREE
Code
&
Barcode
Label
Code,
Qty,
Lot #
Label
CREE
Binwith
Code Cree Bin
&
Barcode
LabelLot #
Code,
Qty,
Label
with
Cree Bin
Label with
Customer
P/N, Qty,
Lot #,
PO##
Code,
Qty,
Lot
Label
with
Cree Bin
Label with
Customer
P/N, Qty,Qty,
Lot #, Lot
PO # #
Code,
Patent Label
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Label with Customer Order
Code, Qty, Reel ID, PO #
Label with Customer Order Code,
Qty, Reel ID, PO#
Label with Cree Bin Code,
Qty, Lot #
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
14
Similar pages