Vishay MPMT1003BBS Thin film resistor, surface mount divider network Datasheet

MPM (Divider)
www.vishay.com
Vishay Dale Thin Film
Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network
FEATURES
• Excellent long term ratio stability
(R ± 0.015 %, 2000 h, + 70 °C)
• Ratio tolerances to ± 0.01 %
• Low TCR tracking ± 2 ppm
• Standard JEDEC TO-236 package variation AB
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
Vishay Dale Thin Film MPM Series Dividers provide
± 2 ppm/°C tracking and a ratio tolerance as tight as 0.01 %,
small size, and exceptional stability for all surface mount
applications. The standard SOT-23 package format with
unity and common standard resistance divider ratios
provide easy selection for most applications requiring
matched pair resistor elements. The ratios listed are
available for off the shelf delivery. If you require a
non-standard ratio, consult the applications engineering
group as we may be able to meet your requirements.
SCHEMATIC
3
R1
1
R2
2
Available
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TRACKING
25
2
ABSOLUTE
RATIO
0.1
0.05
TOL.
STANDARD DIVIDER RATIO (R2/R1)
RATIO
100:1
50:1
25:1
20:1
10:1
9:1
6:1
5:1
5:1
4:1
4:1
2:1
2:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
R2 ()
100K
50K
25K
20K
10K
9K
6K
10K
5K
8K
4K
10K
2K
50K
25K
10K
5K
2.5K
1K
500
250
R1 ()
1K
1K
1K
1K
1K
1K
1K
2K
1K
2K
1K
5K
1K
50K
25K
10K
5K
2.5K
1K
500
250
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 12-Jul-13
SPECIFICATIONS
Passivated nichrome
3
250  to 100 k per resistor
± 25 ppm/°C
± 2 ppm/°C (typical)
± 0.05 % to ± 1.0 %
± 0.01 % to 0.5 %
100 mW
200 mW
R ± 0.05 %
R ± 0.015 %
0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.2 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60001
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPM (Divider)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
INCHES
MIN.
MAX.
0.031
0.040
0.001
0.004
0.105
0.120
0.071
0.079
0.015
0.021
0.083
0.098
0.047
0.055
0.005
0.010
0.0035
0.0059
0.017
0.022
0
8°
DIMENSION
A
A1
B
S
W
L
H
T
J
K
Ø
3
W
B
T
H L
A
S
A1
J
K
1
2
Pin #
Ø
MECHANICAL SPECIFICATIONS
DERATING CURVE
Passivated nichrome
Substrate Material
Silicon
100
Percent of Rated Power
Resistive Element
Body
Molded epoxy
Terminals
Copper alloy
Lead (Pb)-free Option
MILLIMETERS
MIN.
MAX.
0.79
1.02
0.02
0.10
2.67
3.05
1.80
2.00
0.38
0.54
2.10
2.50
1.20
1.40
0.13
0.25
0.089
0.15
0.44
0.55
0
8°
100 % matte tin
Tin Lead Option
Sn85
Tin Lead and Lead (Pb)-free Finish
Plated
100 % = 0.2 W
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MPM1003AWS
M
M
P
M
P
M
T
1
0
1
0
0
3
0
1
5
0
GLOBAL MODEL
(3 or 4 digits)
RESISTANCE
(4 or 8 digits)
MPM
(Tin lead)
First 3 digits are significant
figures and the last digit
specifies the number of zeros
to follow. When like values are
required use total resistance.
When dual values are required
list both values.
MPMT
(Lead (Pb)-free)
(e3)
Example:
(List R1 first in part number
with dual values)
1002 = 10K (5K/5K)
1003 = 100K (50K/50K)
10011002 = 1K/10K divider
0
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.

A = 0.1 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F = 1 %
Z = 0.1 % (1)
Q = 0.05 % (1)
Ratio

0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
0.025 %
0.01 %
1
A
W
S
A
T
1
PACKAGING
BS = BULK 100 min., 1 mult
WS = WAFFLE 100 min., 1 mult
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 4000
TS = 100 min., 1 mult
Historical Part Number example: MPM1002BW (for reference purposes only)
MPM
1002
B
W
SERIES
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
PACKAGING
Notes
(1) Tol. available 1K and up equal values only
(2) Preferred packaging code
Revision: 12-Jul-13
Document Number: 60001
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages