ON MPS651RLRAG Amplifier transistor Datasheet

MPS650, MPS651, NPN
MPS750, MPS751, PNP
MPS651 and MPS751 are Preferred Devices
Amplifier Transistors
Features
• Pb−Free Packages are Available*
http://onsemi.com
MAXIMUM RATINGS
Symbol
MPS650
MPS750
MPS651
MPS751
Unit
Collector −Emitter Voltage
VCE
40
60
Vdc
Collector −Base Voltage
VCB
60
80
Vdc
Emitter −Base Voltage
Rating
VEB
5.0
Vdc
Collector Current − Continuous
IC
2.0
Adc
Total Power Dissipation @
TA = 25°C
Derate above 25°C
PD
625
5.0
mW
mW/°C
Total Power Dissipation @
TC = 25°C
Derate above 25°C
PD
1.5
12
W
mW/°C
−55 to +150
°C
Operating and Storage Junction
Temperature Range
TJ, Tstg
COLLECTOR
3
2
BASE
2
BASE
1
EMITTER
NPN
1
EMITTER
PNP
MARKING
DIAGRAM
MPS
xxx
AYWW
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
TO−92
CASE 29−11
THERMAL CHARACTERISTICS
Characteristic
COLLECTOR
3
Symbol
Max
Unit
Thermal Resistance,
Junction−to−Ambient
RqJA
200
°C/W
Thermal Resistance,
Junction−to−Case
RqJC
83.3
°C/W
xxx
A
Y
WW
= Specific Device Code
= Assembly Location
= Year
= Work Week
ORDERING INFORMATION
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2005
May, 2005 − Rev. 2
1
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MPS650/D
MPS650, MPS651, NPN MPS750, MPS751, PNP
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
40
60
−
−
60
80
−
−
5.0
−
−
−
0.1
0.1
−
0.1
75
75
75
40
−
−
−
−
−
−
0.5
0.3
Unit
OFF CHARACTERISTICS
Collector −Emitter Breakdown Voltage (Note 1)
(IC = 10 mAdc, IB = 0)
Collector −Base Breakdown Voltage
(IC = 100 mAdc, IE = 0 )
MPS650, MPS750
MPS651, MPS751
MPS650, MPS750
MPS651, MPS751
Emitter −Base Breakdown Voltage
(IC = 0, IE = 10 mAdc)
Collector Cutoff Current
(VCB = 60 Vdc, IE = 0)
(VCB = 80 Vdc, IE = 0)
V(BR)CEO
V(BR)CBO
V(BR)EBO
MPS650, MPS750
MPS651, MPS751
Emitter Cutoff Current
(VEB = 4.0 V, IC = 0)
ICBO
IEBO
Vdc
Vdc
Vdc
mAdc
mAdc
ON CHARACTERISTICS (Note 1)
hFE
DC Current Gain
(IC = 50 mA, VCE = 2.0 V)
(IC = 500 mA, VCE = 2.0 V)
(IC = 1.0 A, VCE = 2.0 V)
(IC = 2.0 A, VCE = 2.0 V)
−
Collector −Emitter Saturation Voltage
(IC = 2.0 A, IB = 200 mA)
(IC = 1.0 A, IB = 100 mA)
VCE(sat)
Vdc
Base−Emitter On Voltage (IC = 1.0 A, VCE = 2.0 V)
VBE(on)
−
1.0
Vdc
Base −Emitter Saturation Voltage (IC = 1.0 A, IB = 100 mA)
VBE(sat)
−
1.2
Vdc
fT
75
−
MHz
SMALL− SIGNAL CHARACTERISTICS
Current −Gain − Bandwidth Product (Note 2)
(IC = 50 mAdc, VCE = 5.0 Vdc, f = 100 MHz)
1. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle = 2.0%.
2. fT is defined as the frequency at which |hfe| extrapolates to unity.
http://onsemi.com
2
MPS650, MPS651, NPN MPS750, MPS751, PNP
NPN
PNP
300
250
240
225
VCE = 2.0 V
TJ = 125°C
hFE , DC CURRENT GAIN
hFE , DC CURRENT GAIN
270
210
180
25°C
150
120
−55 °C
90
TJ = 125°C
60
30
200
175
25°C
150
125
100
−55 °C
75
50
25
0
10
20
50
0
−10 −20
100 200
500 1.0 A 2.0 A 4.0 A
IC, COLLECTOR CURRENT (mA)
Figure 1. MPS650, MPS651
Typical DC Current Gain
−1.6
1.4
V, VOLTAGE (VOLTS)
V, VOLTAGE (VOLTS)
−1.8
1.6
1.2
VBE(sat) @ IC/IB = 10
0.8
VBE(on) @ VCE = 2.0 V
0.6
PNP
−2.0
1.8
1.0
−50 −100 −200 −500 −1.0 A −2.0 A −4.0 A
IC, COLLECTOR CURRENT (mA)
Figure 2. MPS750, MPS751
Typical DC Current Gain
NPN
2.0
0.4
−1.4
−1.2
VBE(sat) @ IC/IB = 10
−1.0
−0.8
VBE(on) @ VCE = 2.0 V
−0.6
−0.4
VCE(sat) @ IC/IB = 10
0.2
0
VCE = −2.0 V
50
100
200
500
1.0 A
IC, COLLECTOR CURRENT (mA)
VCE(sat) @ IC/IB = 10
−0.2
2.0 A
0
4.0 A
−50
Figure 3. MPS650, MPS651
On Voltages
−100
−200
−500 −1.0 A
IC, COLLECTOR CURRENT (mA)
Figure 4. MPS750, MPS751
On Voltages
http://onsemi.com
3
−2.0 A
−4.0 A
NPN
1.0
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
MPS650, MPS651, NPN MPS750, MPS751, PNP
0.9
−0.9
0.8
−0.7
0.6
−0.6
0.5
−0.5
0.4
IC = 10 mA IC = 100 mA
0.3
IC = 500 mA
−0.4
IC = 2.0 A
0.2
−0.2
0.1
−0.1
0
0.05 0.1 0.2
0.5 1.0 2.0 5.0 10 20
IB, BASE CURRENT (mA)
50 100 200 500
IC = −10 mA
IC = −2.0 A
IC = −100 mA
0
−0.05 −0.1 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20
IB, BASE CURRENT (mA)
−50 −100−200 −500
Figure 6. MPS750, MPS751
Collector Saturation Region
NPN
10
IC = −500 mA
−0.3
Figure 5. MPS650, MPS651
Collector Saturation Region
PNP
−10
4.0
IC, COLLECTOR CURRENT
TJ = 25°C
−0.8
TJ = 25°C
0.7
−4.0
2.0
1.0 ms
1.0
0.5
0.2
TA = 25°C
0.1
0.05
100 ms
−2.0
1.0
1.0 ms
−1.0
MPS65
0
MPS65
1
−0.5
−0.2
TC = 25°C
−0.1
−0.05
WIRE LIMIT
THERMAL LIMIT
SECOND BREAKDOWN LIMIT
0.02
0.01
PNP
−1.0
2.0
5.0
10
20
50
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
−0.02
−0.01
−1.0
100
Figure 7. MPS650, MPS651 SOA,
Safe Operating Area
TA = 25°C
MPS75
0
MPS75
1
100 ms
TC = 25°C
WIRE LIMIT
THERMAL LIMIT
SECOND BREAKDOWN LIMIT
−2.0
−5.0
−10
−20
−50
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
Figure 8. MPS750, MPS751 SOA,
Safe Operating Area
http://onsemi.com
4
−100
MPS650, MPS651, NPN MPS750, MPS751, PNP
ORDERING INFORMATION
Device
MPS650
MPS650G
MPS650RLRA
MPS650RLRAG
MPS650ZL1
MPS650ZL1G
MPS651
MPS651G
MPS651RLRA
Package
Shipping †
TO−92
5000 Units / Bulk
TO−92
(Pb−Free)
5000 Units / Bulk
TO−92
2000 / Tape & Reel
TO−92
(Pb−Free)
2000 / Tape & Reel
TO−92
2000 / Tape & Ammunition
TO−92
(Pb−Free)
2000 / Tape & Ammunition
TO−92
5000 Units / Bulk
TO−92
(Pb−Free)
5000 Units / Bulk
TO−92
2000 / Tape & Reel
MPS651RLRAG
TO−92
(Pb−Free)
2000 / Tape & Reel
MPS651RLRBG
TO−92
(Pb−Free)
2000 / Tape & Reel
TO−92
2000 / Tape & Ammunition
TO−92
(Pb−Free)
2000 / Tape & Ammunition
TO−92
5000 Units / Bulk
TO−92
(Pb−Free)
5000 Units / Bulk
TO−92
2000 / Tape & Reel
TO−92
(Pb−Free)
2000 / Tape & Reel
TO−92
2000 / Tape & Ammunition
TO−92
(Pb−Free)
2000 / Tape & Ammunition
TO−92
5000 Units / Bulk
TO−92
(Pb−Free)
5000 Units / Bulk
TO−92
2000 / Tape & Reel
TO−92
(Pb−Free)
2000 / Tape & Reel
TO−92
2000 / Tape & Ammunition
TO−92
(Pb−Free)
2000 / Tape & Ammunition
TO−92
2000 / Tape & Ammunition
TO−92
(Pb−Free)
2000 / Tape & Ammunition
MPS651RLRM
MPS651RLRMG
MPS750
MPS750G
MPS750RLRA
MPS750RLRAG
MPS750RLRP
MPS750RLRPG
MPS751
MPS751G
MPS751RLRA
MPS751RLRAG
MPS751RLRP
MPS751RLRPG
MPS751ZL1
MPS751ZL1G
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
5
MPS650, MPS651, NPN MPS750, MPS751, PNP
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AL
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
B
R
P
L
SEATING
PLANE
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
K
D
X X
G
J
H
V
C
1
N
SECTION X−X
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
−−−
0.250
−−−
0.080
0.105
−−− 0.100
0.115
−−−
0.135
−−−
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
−−−
6.35
−−−
2.04
2.66
−−−
2.54
2.93
−−−
3.43
−−−
N
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
Literature Distribution Center for ON Semiconductor
USA/Canada
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Phone: 81−3−5773−3850
Email: [email protected]
http://onsemi.com
6
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
MPS650/D
Similar pages