MMD MQAC Mqac & mqat sery Datasheet

MQAC & MQAT Series
 Same Day Shipping Available
 Full-Size (14Pin Dip)
 CMOS/TTL Output
 Wide Frequency Range
Frequency
1.000MHZ to 150.000MHZ
Frequency Stability (Inclusive of Temperature, Load & Voltage)
See Part Number Guide
Aging @ +25°C
±5 ppm per year max
Operating Temperature Range
See Part Number Guide
-55°C to +125°C
Storage Temperature Range
Output Waveform
TTL
Supply Voltage (Vdd)
Supply Current (unloaded)
Load
CMOS
+3.3 VDC ±10%
+5.0 VDC ±10%
+3.3 VDC ±10%
+5.0 VDC ±10%
25mA
45mA
25mA
45mA
10 TTL or 50pF
15pF
5TTL or 30pF
30pF
Logic “0”
0.4V max
0.4V max
Logic “1”
2.4 V min
Vdd-0.4V min
Rise/Fall Time
4nSec max
Start Up Time
10mSec max
Duty Cycle
Jitter
Tri-State Operation
1.000MHZ to 66.000MHZ
45%/55% (TTL @ 1.4V Level / CMOS @ 50% Waveform)
66.000MHZ and above
40%/60% (TTL @ 1.4V Level / CMOS @ 50% Waveform)
1.000MHZ to 33.000MHZ
50pSec max (RMS)
50pSec max (RMS)
33.000MHZ and above
30pSec max (RMS)
40pSec max (RMS)
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% of Vdd max or grounded to Disable Output (High Impedance)
Environmental & Mechanical Detail
Marking Detail
Line 1 = MXXXXX
Shock
MIL-STD-883, Method 2002 Cond B
Solderability
MIL-STD-883, Method 2003
Solvent Resistance
MIL-STD-202, Method 215
Vibration
MIL-STD-883, Method 2007, Cond A
M
=
MMD
XXXXX
=
Frequency in MHZ
S
=
YYWW
=
L
=
Internal Code
4 Numerical Digit Date
Code (Year / Week)
Denotes RoHS Compliant
Line 2 = SYYWWL
Line 3 = XXXXX
Internal use only
Gross Leak Test
MIL-STD-883, Method 1014, Cond C
May vary with lots
Pin 1 Designator
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Subject to change without notice
05/03/11 C
Pg 1 of 2
Part Number Guide
MQA
H
FREQUENCY
Full-size (14 pin DIP)
Output
C = CMOS
T = TTL
Frequency
Stability
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Supply Voltage
5 = +5 VDC
3 = +3.3 VDC
Operating Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Pin 1 Connection
H = Tri-state
Value Added Options
Blank = No Added Options
G1 = Gull-Wing (option 1)
G = Gull-Wing (option 2)
CLXXX = Cut Leads
XXX = Lead Length Code
PLEASE CONSULT WITH MMD SALES DEPARTMENT FOR ANY OTHER PARAMETERS OR OPTIONS
Mechanical Details
20.70 [.815]
15.24 [.600]
20.70 [.815]
MAX
13.10 [.516]
MAX
5.08 [.200]
MXXXXX
SYYWWL
XXXXX
7.62 [.300]
5.08 [.200]
MIN
PIN CONNECTIONS
PIN 1 TRI-STATE
PIN 7 GROUND
PIN 8 OUTPUT
PIN 14 SUPPLY VOLTAGE
.50 [.020]
DIMENSIONS IN BRACKET ARE IN INCHES
EXTERNAL BYPASS CAPACITOR RECOMMENDED
Tape & Reel Dimensions
PITCH
Tape Width
Q1 Q2
Q1 Q2
Q3 Q4
Q3 Q4
REEL DIA
PITCH
TAPE WIDTH
REEL DIA
PIN 1 ORIENT.
12.00 [.471]
24.00 [.945]
330 [13.0]
Q1
DIRECTION OF FEED
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Subject to change without notice
05/03/11 C
Pg 2 of 2
Similar pages