MMD MQIC Mqic & mqit series 5x7 ceramic smd oscillator Datasheet

MQIC & MQIT Series 5X7 Ceramic SMD Oscillator
 Same day Shipping Available
 5x7mm SMD Package
 RoHS Compliant
 Tape & Reel package Available
Frequency
1.000MHZ to 150.000MHZ
Frequency Stability (Inclusive of Temperature, Load & Voltage)
See Part Number Guide
Aging @ +25°C
±5 ppm per year max
Operating Temperature Range
See Part Number Guide
-55°C to +125°C
Storage Temperature Range
Output Waveform
TTL
Supply Voltage (Vdd)
+3.3 VDC ±10%
Supply Current (unloaded)
Load
CMOS
+5.0 VDC ±10%
+3.3 VDC ±10%
+5.0 VDC ±10%
25mA
45mA
25mA
45mA
5 TTL or 30pF
10 TTL or 50pF
15pF
30pF
Logic “0”
0.4 V max
0.3 V max
0.5 V max
Logic “1”
2.4 V min
3.0 V min
4.5 V min
Rise/Fall Time
4nSec max
Start Up Time
Duty Cycle
Jitter
Tristate Operation
10mSec max
1.000MHZ to 66.000MHZ
45%/55% (TTL @ 1.4V Level / CMOS @ 50% Waveform)
66.000MHZ and above
40%/60% (TTL @ 1.4V Level / CMOS @ 50% Waveform)
1.000MHZ to 33.000MHZ
5pSec max (RMS)
33.000MHZ and above
10pSec max (RMS)
Vol =
Voh =
Mechanical & Environmental Detail
Shock
Solderability
Solvent Resistance
70% of Vdd min or No Connection to Enable Output
30% of Vdd max or grounded to Disable Output (High Impedance)
MIL-STD-883, Method 2002 Cond B
MIL-STD-883, Method 2003
MIL-STD-202, Method 215
Marking Detail
Line 1 = MXXXXX
M
=
MMD
XXXXX
=
Frequency in MHZ
=
Internal Code
=
4 Digit Date Code (Year /
Week)
=
Denotes RoHS Compliant
Line 2 = SYYWWL
S
Vibration
MIL-STD-883, Method 2007, Cond A
YYWW
Gross Leak Test
MIL-STD-883, Method 1014, Cond C
L
Fine Leak Test
MIL-STD-883, Method 1014, Cond A2
MSL
Level 1 per IPC/JEDEC J-STD 20
Line 3 = XXXXX
Internal use only
May vary with lots
Black dot to denote Pin 1
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Subject to change without notice
04/29/11
Pg 1of 2
Part Number Guide
MQI
FREQUENCY
H
5 x 7 Ceramic SMD
Frequency
Stability
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Supply Voltage
5 = +5 VDC
3 = +3.3 VDC
Output
C = CMOS
T = TTL
Operating Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Pin 1 Connection
H = Tri-state
Package
Blank = Bulk
T= Tape and Reel
PLEASE CONSULT WITH MMD SALES DEPARTMENT FOR ANY OTHER PARAMETERS OR OPTIONS
Mechanical Details
7.20 [.283]
MAX
MXXXXX
SYYWWL
XXXXX
5.08 [.200]
1.70 [.067]
MAX
2.88 [.113]
1.81 [.071]
5.20 [.205]
MAX
1.30 [.051]
PIN 1 INDICATOR
3
4
2
1
2.60 [.102]
Pin Connections
Pin 1 Tri-state
Pin 2 Case Ground
Pin 3 Output
1.40 [.055]
Dimension in Brackets are in Inches
External Bypass Capacitor is Recommended
Pin 4 Supply Voltage
2.00 [.079]
2.20 [.087]
Recommended Land
Pattern
Tape & Reel Dimensions
PITCH
TAPE WIDTH
REEL DIA
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
PITCH
TAPE WIDTH
REEL DIA
QTY PER REEL
PIN 1 ORIENT.
8.00 [.315]
16.00 [.630]
180[7 IN]
1000
Q1
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters.
3. Tolerances are ±0.10 [.004] mm unless otherwise specified.
4. Do not scale drawing.
DIRECTION OF FEED
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Subject to change without notice
04/29/11
Pg 2of 2
Similar pages