NKK MRB12B-AG Miniature pcb process sealed rotary Datasheet

Miniature PCB Process Sealed Rotaries
Series MRB
Distinctive Characteristics
Double flatted bushing prevents rotation in panel and increases
stability.
Totally sealed construction, achieved with combination of an
interior o-ring, a seal between the frame and base, plus insert
molded terminals, prevents contact contamination and allows
automated soldering and cleaning.
Positive detent mechanism for distinct feel and audible
feedback.
Break-before-make contact timing with sliding
contact mechanism.
Metal bushing and frame/bracket provide
durability.
Panel seal, achieved with use of optional
exterior o-ring, conforms to IP67 of IEC60529
Standards.
High contact reliability achieved by the self-cleaning
contact mechanism.
.100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to
standard PC board grid spacing for straight and right angle mounting.
Actual Size
Insert molded terminals lock out flux and other contaminants.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature PCB Process Sealed Rotaries
Series MRB
General Specifications
Electrical Capacity (Resistive Load)
Logic Level:
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Operating Torque:
Contact Timing:
Indexing:
Materials & Finishes
Shaft:
Bushing:
Frame/Bracket:
Movable Contacts:
Stationary Contacts:
Terminals:
Base:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
Installation
Mounting Torque:
Cap Installation Force:
PCB Processing
Soldering:
Cleaning:
Standards & Certifications
UL Recognition
or CSA Certification:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: See Supplement Index to find explanation of operating range.
80 milliohms maximum
100 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
30,000 operations minimum
10,000 operations minimum
0.04Nm average
Nonshorting (break-before-make)
45° for On-On-On & 90° for On-None-On
Brass with nickel plating
Zinc alloy with nickel plating
Steel with tin plating
Beryllium copper spring with gold plating
Copper with gold plating
Brass with tin plating
Polyamide
–10°C through +70°C (+14°F through +158°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 3 right angled directions, with 5 shocks in each direction)
.686Nm (6.08 l b • in)
19.6 ~ 29.4N (4.41 ~ 6.61 lbf)
Wave Soldering Recommended: See Profile B in Supplement section
Manual Soldering: See Profile B in Supplement section
Automated cleaning. See Cleaning specifications in Supplement section.
The MRB Series rotaries have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series MRB
Miniature PCB Process Sealed Rotaries
TYPICAL SWITCH ORDERING EXAMPLE
1
MRB
2
POLES
1
SPDT
SP3T
2
DPDT
DP3T
KNOBS
TERMINALS
B
Straight with Bracket
H
Right Angle with Bracket
CIRCUITS & INDEXING
2
ON
NONE
ON
90°
4
ON
ON
ON
45°
A
B
A
Plain Black
B
Small Color Tipped
C
Large Color Tipped
COLORS
For Plain Knob
No
Code
For Color Tipped
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
MRB12B-A
Plain Black Knob
SPDT with
ON-NONE-ON Circuit
& 90° Indexing
Black
A
Black
B
White
C
Red
E
Yellow
F
Green
G
Blue
H
Gray
Straight PC Terminals
with Bracket
POLES & CIRCUITS
Actuator Positions
Pole
Connected Terminals
Throw & Schematics
Model
Position 1
Position 2
Position 3
Position 1
Position 2
Position 3
MRB12
ON
NONE
ON
C1-1
OPEN
C1-2
Note: Terminal numbers
are not actually on switch
C1
SPDT
1
SP
2
C1
MRB14
ON
ON
ON
C1-1
C1-2
C1-3
SP3T
1 2 3
C2
C1
MRB22
ON
NONE
ON
C1-1 C2-4
OPEN
C1-2 C2-5
DPDT
1
DP
2
C1
MRB24
ON
ON
ON
C1-1 C2-4 C1-2 C2-5 C1-3 C2-6
4
5
C2
DP3T
1 2 3
4 5 6
TERMINALS
B
Straight PC Terminals
with Bracket
SPDT
H
Right Angle PC Terminals
with Bracket
DPDT
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series MRB
Miniature PCB Process Sealed Rotaries
TYPICAL SWITCH DIMENSIONS
90° Indexing • SPDT & DPDT • Straight PC
POS 3
(5.08)
.200
(2.28)
.090
(3.1) Dia
.122
Keyway
(14.5)
.571
MRB12B
(0.7) Dia Typ
.028
(0.5) Typ
.020
(2.54)
.100
M6 P0.75
90°
POS 1
(10.0)
.394
(7.0)
.276
(11.0)
.433
Actuator shown in Position 1
(2.54) Typ
.100
4
1
2
5
C1
C2
(15.74)
.620
4
1
5
2
C2
C1
(0.7) Typ
.028
(2.54) Typ
.100
(3.5)
.138
(10.16)
.400
(10.16)
.400
(5.08)
.200
(1.0) Dia Typ
.039
Single pole model does not have terminals 4, 5 & C2
90° Indexing • SPDT • Right Angle PC
(2.28)
.090
POS 1
(15.74)
.620
Double Flat with
M6 P0.75
90°
(9.0)
.354
Keyway
POS 3
(3.1) Dia
.122
(0.5) Typ
.020
(15.24)
.600
MRB12H
(7.0)
.276
(0.7) Typ
.028
(9.4)
.370
(10.0)
.394
2
1
(7.62)
.300
(2.54)
.100
C1
(2.54) Typ
.100
(2.54)
.100
(16.3)
.642
(5.08)
.200
(2.54)
.100
C1
2
(2.54) Typ
.100
(2.54)
.100
1
(7.62)
.300
(3.5)
(0.7) Dia Typ .138
.028
(5.08)
.200
(1.0) Dia Typ
.039
CL
Actuator shown in Position 1
90° Indexing • DPDT • Right Angle PC
POS 1
(2.28)
.090
(15.74)
.620
Double Flat with
M6 P0.75
5
4
C2
90°
(9.0)
.354
Keyway
POS 3
(3.1) Dia
.122
(15.24)
.600
MRB22H
(0.5) Typ
.020
(10.0)
.394
(7.0)
.276
(0.7) Typ
.028
(9.4)
.370
1
(7.62)
.300
(2.54)
.100
(2.54)
.100
2
C1
(2.54) Typ
.100
(2.54)
.100
(16.3)
.642
(5.08)
.200
(2.54) Typ
.100
(2.54)
.100
C2
5
4
C1
2
1
(2.54)
.100
(7.62)
.300
(3.5)
(0.7) Dia Typ .138
.028
(5.08)
.200
(1.0) Dia Typ
.039
CL
Actuator shown in Position 1
45° Indexing • SP3T & DP3T • Straight PC
POS 1
45°
POS 3
(0.7) Dia Typ
.028
(0.5) Typ
.020
(2.54) Typ
.100
POS 2
45°
M6 P0.75
4
1
2
(5.08)
.200
(2.28)
.090
(3.1) Dia
.122
MRB14B
Keyway
(14.5)
.571
(10.0)
.394
Actuator shown in Position 1
(7.0)
.276
(11.0)
.433
(2.54) Typ
.100
(3.5)
.138
5
3
6
C1
C2
(10.16)
.400
(15.74)
.620
(0.7) Typ
.028
(2.54) Typ
.100
4
1
5
2
6
3
C1
C2
(10.16)
.400
(5.08)
.200
(1.0) Dia Typ
.039
Single pole model does not have terminals 4, 5, 6 & C2
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature PCB Process Sealed Rotaries
Series MRB
TYPICAL SWITCH DIMENSIONS
45° Indexing • SP3T • Right Angle PC
(2.28)
.090
(15.74)
.620
Double Flat with
M6 P0.75
POS 1
45°
POS 2
(9.0)
.354
45°
Keyway
POS 3
(3.1) Dia
.122
(15.24)
.600
(0.5) Typ
.020
(7.0)
.276
(0.7) Typ
.028
(9.4)
.370
(10.0)
.394
MRB14H
2
1
C1
3
(2.54) Typ
.100
(2.54)
(2.54) Typ
.100
.100
(7.62)
.300
(16.3)
.642
(2.54) Typ
.100
(5.08)
.200 C1
3
2
(2.54) Typ
.100
(2.54)
.100
1
(7.62)
.300
(3.5)
(0.7) Dia Typ .138
.028
(5.08)
.200
(1.0) Dia Typ
.039
CL
Actuator shown in Position 1
45° Indexing • DP3T • Right Angle PC
POS 1
(2.28)
.090
(15.74)
.620
Double Flat with
M6 P0.75
6
5
4
(2.54) Typ
.100
(5.08)
.200 C2
C2
45°
POS 2
(9.0)
.354
45°
Keyway
POS 3
(3.1) Dia
.122
(15.24)
.600
(0.5) Typ
.020
(7.0)
.276
(0.7) Typ
.028
(9.4)
.370
(10.0)
.394
MRB24H
1
2
3
C1
(2.54) (2.54) Typ
.100 .100
(2.54) Typ
(2.54)
.100
.100
(7.62)
.300
(16.3)
.642
C1
(2.54) Typ
.100
6
5
4
3
2
1
(2.54)
.100
(7.62)
.300
(3.5)
(0.7) Dia Typ .138
.028
(5.08)
.200
(1.0) Dia Typ
.039
CL
Actuator shown in Position 1
KNOBS
A
AT433
Plain Black
B
(19.0) Dia
.748
(11.0) Dia
.433
Material:
Polyacetal
Color:
Black
Polyester Base:
Black
(13.0)
.512
(9.5)
.374
A
Black
Shaft Detail
C
White
(9.5)
.374
(0.5)
.020
Red
E
When mounting a right
angle switch, a cap clearrance of .035” (0.9mm)
is recommended.
(10.0)
.394
(1.0)
.039
Interruption
by end of PCB
AT4104 Large
Color Tipped
Polyester Base:
Black
F
Yellow
Green
PCB
(0.9)
.035
(18.0) Dia
.709
(11.0) Dia
.433
(15.8)
.622
Polyamide Tip
Colors:
A, B, C, E, F, G, H
Mounting Precaution
for Cap Clearance on
Right Angle Models
(2.28)
.090
(3.1) Dia
.122
B
C
(16.0) Dia
.630
(9.5) Dia
.374
(14.3)
.563
Polyamide Tip
Colors:
A, B, C, E, F, G, H
(0.5)
.020
Color Codes:
AT4103 Small
Color Tipped
G
(9.5)
.374
(0.5)
.020
Blue
H
Gray
Standard Hardware Supplied
AT513M Hex Nut
AT507M Locking Ring
AT509 Lockwasher
Optional Hardware
AT535 O-ring for Panel Seal
See Supplement for details
PANEL CUTOUTS & MAXIMUM EFFECTIVE PANEL THICKNESS
With Standard
Hardware
.087” (2.2mm)
(6.35) Dia
.250
(2.2) Dia
.087
(6.5)
.256
Without
Locking Ring
.118” (3.0mm)
(5.6)
.220
(6.35) Dia
.250
(0.6)
.024
Sealed Panel
with 2 Hex Nuts &
1 Rubber O-ring
.165” (4.2mm)
(6.2) Dia
.244
(5.4)
.213
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Similar pages