ITT MS3476A18-32BW Series 2 connectors pv Datasheet

MIL-C-26482, Series 2 Connectors
PV
• Intermatable with MIL-C-26482 Series I
• Operating termperature - 55˚C to + 200˚C
The PV connector is designed to meet the rugged
requirements of MIL-C-26482, Series 2/MIL-C-83723
Series I*, the specification which delineates
the critical requirements of space-age applications. PV
connectors have been used extensively on major
aerospace programs requiring general-purpose,
miniature cylindrical bayonet coupling connectors
such as Space Shuttle, Apollo, ATM, OWS Minuteman, Skylab, Thor-Delta, Titan IIIC, and Viking.
4
3
The PV series is an important member of the
Universal Interconnect System (UIS) - the only
system that can perform all interconnection missions. This system is adaptable for use with connectors of all shapes and sizes, including circular and
rectangular configurations. standard, miniature and
subminiature sizes. UIS is a rear servicing system
that evolved from the LITTLE CAESAR® rear release contact retention assembly, pioneered and
developed by ITT Cannon. Since this time,
ITT Cannon, and its licensees, have supplied to
industry over 250 million interconnections utilizing
this system.
Universal Insertion / Extraction Tool Style - A
single,expendable plastic tool is used for insertion and
extraction of both pins and sockets.
PV7 connectors are available under numerous industrial specifications, some of which are listed
below:
Closed-Entry Socket Insert - Hard dielectric socket
face of mating connector has lead-in chamfers for
positive alignment of pins and sockets.
• CS512089 Jet Propulsion Laboratory
• 40M39569 NASA, George C. Marshall Space
Flight Center
• 81D52 Martin Marietta, Denver Division
• MG414-0365 Rockwell International Space
Division
Interfacial Pin Insert Seal - Universal interconnect
permits design of raised moisture barriers around each
pin which mate into lead-in chambers of hard face
sockets insert for individual contact sealing. Interfacial
sealing is never touched by service tools.
• AC414-0013 Rockwell International Autonetics
Division
• STS0003 McDonnell Douglas Astronautics
Superior Contact Stability - Rear Contact Release
System (LITTLE CAESAR contact assembly) features a
stamped metal retaining clip captivated by molded-in
shoulders of each contact cavity in the insulator. A
rear-inserted plastic tool expands the tines beyond the
contact shoulder, releasing the contact.
This connector series is manufactured to accommodate the following backshells: M85049/31
(MS3416), M85049/51 (MS3418) and M85049/
52 (MS3417). Backshells are not included with
connector and must be ordered separately. Backshells on page 161 are Non-MS type.
1
2
Simple, Strong Contact Design - One basic configuration eliminates undercuts and maximizes bend resistance for positive contact mating.
Polarized Backshells - Interlocking teeth on the front of the
backshell and rear portion of the shell allow
endbells to be positioned as desired, eliminating chafing of wire during assembly.
Military Specification Cross Reference
PV7 and MIL-C-26482
(Series 2) Replacement for
MIL-C-26482 (Series 1)
MS3110,MS3120
MS3111,MS3121
MS3112,MS3122
MS3114,MS3124
MS3116,MS3126
NAS1599
NAS1650,NAS1699
NAS1651,NAS1700
NAS1652,NAS1701
NAS1653,NAS1702
MS Standards
MS3470
MS3471
MS3470
MS3474
MS3476
MS3472
MS3475
MS3470
MS3472
MS3474
MS3476
ITT Cannon Prefix
Commercial
Design
MIL-C-26482
PV70
PV71
PV70
PV74
PV76
PV72
PV75
MIL-C-83723*
Slash Sheet
Description
Socket
/1
/7
/1
/5
/13
/3
/43
Pin
/2
/8
/12
/6
/14
/4
/42
Narrow Flange Receptacle
Cable Connecting Receptacle
Narrow Flange Receptacle
Jam Nut Receptacle
Straight Plug
Wide Flange Receptacle
Straight Plug, RFI Shielded
/1
/3
/5
/13
/2
/4
/6
/14
Narrow Flange Receptacle
Wide Flange Receptacle
Jam Nut Receptacle
Straight Plug
*NOTE: M83723 series has been superseded by MIL-C-26482 Series 2.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
157
MIL-C-26482, Series 2 Connectors
PV
Performance and Material Specifications
MATERIALS AND FINISHES
Description
Material
Finish
Shell
Aluminum alloy per QQ-A-367, QQ-A-591 or QQ-A-225
Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab
cadmium over nickel
Insulators
Rigid dielectric
None
Elastomers (grommets, interfacial and O ring seals)
Silicone rubber (ITT Cannon blend) or Fluorosiclicone rubber (ITT
Cannon blen)
None
None
Contacts
Copper alloy
Gold page per MIL-G-45204
Coupling Nut
Aluminum alloy per QQ-A-591
Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab
cadmium over nickel
Jam Nut (on PV74)
Aluminum alloy per QQ-A-225
Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab
cadmium over nickel
ELECTRICAL
Contact
Size
Wire
Size
12
12
16
20
Insulation O.D. Limits, inch (mm)
min.
max.
Max Current
for Test (amps)
Potential Drop
(Millivolts at 25˚C)
23
50
14
17
45
16
13
50
20
7.5
45
20
7.5
55
3.0
45
24
.097 (2.46)
.053 (1.53)
.040 (1.02)
.158 (4.01)
.103 (2.62)
.083 (2.11)
Dielectric Withstanding Voltage (Test Volatge)
Service Rating
Sea Level
I
1500 Vac rms
70,000 ft. Altitude
375 Vac rms
5000 megohms minimum
(25˚C)
II
2300 Vac rms
500 Vac rms
5000 megohms minimum
How to Order
PV
MS
70
3470
L
L
18
18
-32
-32
P
P
W
W
L
SERIES PREFIX
SHELL STYLE
CLASS
SIZE
CONTACT ARRANGEMENT
CONTACT TYPE
ALTERNATE INSERT POSITIONS
LESS COMPONENTS
SERIES PREFIX
MS - Complies with MIL-C-26482 Series 2
PV - ITT Cannon Interchangeable with
MIL-C-26482, Series 2
SHELL STYLE
ITT Cannon
Part No.
Military No.
PV70
PV71
PV72
PV74
PV75
PV76
MS3470
MS3471
MS3472
MS3474
MS3475
MS3476
Description
- Narrow Flange Receptacle
- Cable Connecting Receptacle
- Wide Flange Receptacle
- Jam Nut Receptacle
- Straight Plug, RFI Shielded
- Straight Plug
CLASS
(PV Series and MS Series)
*A - Fluid resistant, 200˚C, non-conductive
(anodized)
L - Fluid resistant, 200˚C, conductive, finish
(nickely)
W - Corrosive and fluid resistant, 175˚C
(cadmium over nickel)
CONTACT TYPE
P - Pin contact
S - Socket contact
A - Less pin contact* (MS only)
B - Less socket contacts* (MS only)
* The "A" and "B" designators are used only when other
than power contacts are ato be installed (i.e. shielded, coaxial
and thermocouple contacts).
ALTERNATE INSERT POSITIONS
SHELL SIZE
8, 10, 12, 14, 16, 18, 20, 22 and 24
(Size 8 avialable in PV70 & 76 only)
CONTACT ARRANGEMENTS
See page 162.
No designation required for normal posistion.
Standard MS alternate positions available.
LESS COMPONENTS
Use "L" if PV connectors are ordered less
contacts, sealing plugs and insertion/extraction
tool ("L" is not stamped on connectors). To
order MS connectors less contacts, purchase
order must state less contacts.
*Consult factory for availablility.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
158
MIL-C-26482, Series 2 Connectors
PV
Narrow Flange Receptacle
MS3470
PV70
4 HOLES .125/.115 (3.18/2.92) DIA. SIZES 10-22
.152/.142/(3.86/3.61) DIA SIZE 24 ONLY
POLARIZING
GROOVE
B
U THD
F
DIA
L
(TYP)
J
.140 RAD.
MAX.
G
K
(TYP)
.130/.190
(3.30/4.83)
(TP)
G
Max
J
Max
U Thread
UNEF
Class 2A
Shell
Size*
B
Max
F
Max
K
L
8
.462 (11.73)
.474 (12.04)
1.215 (30.85)
.078 (1.98)
.594 (15.09)
.828 (21.03)
1/2-20
10
.462 (11.73)
.594 (15.01)
1.215 (30.85)
.078 (1.98)
.719 (18.26)
.954 (24.23)
5/8-24
12
.462 (11.73)
.751 (19.08)
1.215 (30.85)
.078 (1.98)
.812 (20.62)
1.047 (26.59)
3/4-20
14
.462 (11.73)
.876 (22.25)
1.215 (30.85)
.078 (1.98)
.906 (23.01)
1.141 (28.98)
7/8-20
16
.462 (11.73)
1.001 (25.43)
1.215 (30.85)
.078 (1.98)
.969 (24.61)
1.234 (31.34)
1-20
18
.462 (11.73)
1.126 (28.60)
1.215 (30.85)
.078 (1.98)
1.062 (26.97)
1.328 (33.73)
1-1/16-18
20
.587 (14.91)
1.251 (31.78)
1.275 (32.40)
.110 (2.79)
1.156 (29.36)
1.453 (36.91)
1-3/16-18
22
.587 (14.91)
1.376 (34.95)
1.275 (32.40)
.110 (2.79)
1.250 (31.75)
1.578 (40.08)
1-5/16-18
24
.620 (15.75)
1.501 (38.13)
1.275 (32.40)
.110 (2.79)
1.375 (34.93)
1.703 (43.26)
1-7/16-18
Cable Connecting Receptacle
MS3471
PV71
B
POLARIZING
GROOVE
J
V THD
R DIA.
MAX.
A
DIA.
W
.130/.190
(3.30/4.83)
S MAX.
(TYP.)
Shell
Size*
GR
REF.
TYPE R
TYPE S
HR
Backshell Assemblies not supplied with MS connectors.
Perfomance Specifications - Page 158
Contacts, Sealing Plugs, Assembly Tools - Pages
163, 165
J
Max
R Dia.
Max
S
Max
W
Max
U Thread
UNEF
Class 2A
10
.591 (15.01)
.462 (11.73)
.078 (1.98)
1.082 (27.48)
.954 (24.23)
1.215 (30.86)
5/8-24
12
.751 (19.08)
.462 (11.73)
.078 (1.98)
1.176 (29.87)
1.047 (26.59)
1.215 (30.86)
3/4-20
14
.876 (22.25)
.462 (11.73)
.078 (1.98)
1.270 (32.26)
1.141 (28.98)
1.215 (30.86)
7/8-20
16
1.001 (25.43)
.462 (11.73)
.078 (1.98)
1.364 (34.64)
1.234 (31.34)
1.215 (30.86)
1-20
18
1.126 (28.60)
.462 (11.73)
.078 (1.98)
1.458 (37.03)
1.328 (33.73)
1.215 (30.86)
1-1/16-18
20
1.251 (31.78)
.587 (14.91)
.110 (2.79)
1.708 (43.38)
1.578 (40.08)
1.275 (32.38)
1-5/16-18
22
1.376 (34.95)
.587 (14.91)
.110 (2.79)
1.708 (43.38)
1.578 (40.08)
1.275 (32.38)
1-5/16-18
24
1.501 (38.13)
.620 (15.75)
.110 (2.79)
1.832 (46.53)
1.703 (43.26)
1.275 (32.38)
1-7/16-18
Shell
Size*
TYPE C
Ec
Max.
10
1.492 (37.90)
12
1.492 (37.90)
14
1.492 (37.90)
16
1.492 (37.90)
18
ES REF.
FS
TYPE C
B
Max
Receptacle Assembly With Backshell†
ER REF.
EC REF.
A
Max
TYPE S
Fs
Max.
TYPE R
Hr
Max.
Es
Max.
Gr
Max.
Er
Max.
.286 (7.26)
1.842 (46.79)
.880 (23.35)
.286 (7.26)
2.115 (53.72)
.416 (10.57)
1.842 (46.79)
.950 (24.13)
.416 (10.57)
2.250 (57.15)
.476 (12.09)
2.077 (52.76)
1.010 (25.65)
.476 (12.09)
2.340 (59.44)
.626 (15.90)
2.077 (52.76)
1.070 (27.18)
.626 (15.90)
2.475 (62.87)
1.492 (37.90)
.706 (17.93)
2.077 (52.76)
1.130 (28.70)
.706 (17.93)
2.574 (65.38)
20
1.552 (39.42)
.831 (21.11)
2.137 (54.28)
1.190 (30.23)
.831 (21.11)
2.767 (70.28)
22
1.552 (39.42)
.956 (24.28)
2.137 (54.28)
1.260 (32.00)
.956 (24.28)
2.890 (73.41)
24
1.552 (39.42)
1.081 (27.46)
2.137 (54.28)
1.320 (33.53)
1.081 (27.46)
3.012 (76.50)
*See page 158 for part numbers.† To order backshell assemblies separately, see page 161.
Contacts Arrangements - Page 162
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
159
MIL-C-26482, Series 2 Connectors
PV
Wide Flange Receptacle
MS3472
PV72
4 HOLES .150 +
_ .005
(3.81 +
_ 0.13mm)
DIA.
POLARIZING
GROOVE
B
P THD.
A
DIA.
Q
(TYP)
G
F
H (TP)
.140 RAD.
MAX.
Shell
Size*
A
Max.
.130/.190
(3.30/4.83)
B
Max.
F
Max.
G
Max.
H
Max.
Q
Max.
P Thread
UNEF
Class A
10
.591 (15.01)
.493 (12.52)
1.215 (30.85)
.078 (1.98)
.812 (20.62)
1.141 (28.98)
5/8-24
12
.751 (19.08)
.493 (12.52)
1.215 (30.85)
.078 (1.98)
.938 (23.83)
1.266 (32.16)
3/4-20
14
.876 (22.25)
.493 (12.52)
1.215 (30.85)
.078 (1.98)
1.031 (26.19)
1.360 (34.54)
7/8-20
16
1.001 (25.43)
.493 (12.52)
1.215 (30.85)
.078 (1.98)
1.125 (28.58)
1.453 (36.91)
1-20
18
1.126 (28.60)
.493 (12.52)
1.215 (30.85)
.078 (1.98)
1.203 (30.56)
1.532 (38.91)
1-1/16-18
20
1.251 (31.78)
.587 (14.91)
1.275 (32.40)
.110 (1.98)
1.297 (32.94)
1.688 (42.88)
1-3/16-18
22
1.376 (34.95)
.587 (14.91)
1.275 (32.40)
.110 (1.98)
1.375 (34.93)
1.766 (44.86)
1-5/16-18
24
1.501 (38.13)
.620 (15.75)
1.275 (32.40)
.110 (1.98)
1.500 (38.10)
1.891 (48.03)
1-7/16-18
Jam Nut Receptacle
MS3474
PV74
GG
POLARIZING
GROOVE
L THD.
W
F
DIA.
V
B
G
A
H
.130/.190
(3.30/4.83)
Shell
Size*
V
Max.
A
Max.
B
Max.
F
Max.
G
Max.
GG
Panel
Thickness
H
Max.
W
Dia.
Max.
L Thread
UNEF
Class 2
8
.954 (24.23)
.767 (19.48)
.113 (2.87)
.474 (12.04)
.707 (17.96)
.187/.062 (4.75/1.57)
1.215 (30.86)
1.078 (27.38)
1/2-20
10
1.078 (27.38)
.892 (22.66)
.113 (2.87)
.591 (15.01)
.707 (17.96)
.187/.062 (4.75/1.57)
1.215 (30.85)
1.203 (30.56)
5/8-24
12
1.266 (32.16)
1.079 (27.41)
.113 (2.87)
.751 (19.08)
.707 (17.96)
.187/.062 (4.75/1.57)
1.215 (30.85)
1.391 (35.33)
3/4-20
14
1.391 (35.33)
1.205 (30.61)
.113 (2.87)
.876 (22.25)
.707 (17.96)
.187/.062 (4.75/1.57)
1.215 (30.85)
1.516 (38.51)
7/8-20
16
1.516 (38.51)
1.329 (33.76)
.113 (2.87)
1.001 (25.43)
.707 (17.96)
.187/.062 (4.75/1.57)
1.215 (30.85)
1.641 (41.68)
1-20
18
1.641 (41.68)
1.455 (36.96)
.113 (2.87)
1.126 (28.60)
.707 (17.96)
.187/.062 (4.75/1.57)
1.215 (30.85)
1.766 (44.86)
1-1/16-18
20
1.828 (46.43)
1.579 (40.11)
.148 (3.76)
1.251 (31.78)
.772 (19.61)
.250/.062 (6.35/1.57)
1.275 (32.40)
1.954 (49.63)
1-3/16-18
22
1.954 (49.63)
1.705 (40.11)
.148 (3.76)
1.376 (34.95)
.772 (19.61)
.250/.062 (6.35/1.57)
1.275 (32.40)
2.078 (52.78)
1-5/16-18
24
2.078 (52.78)
1.829 (46.46)
.148 (3.76)
1.501 (38.13)
.772 (19.61)
.219/.062 (5.56/1.57)
1.275 (32.40)
2.203 (55.96)
1-7/16-18
Receptacle Assembly With Backshell†
BBR REF.
BBC REF.
BBS REF.
FS
GR
REF.
TYPE R
TYPE C TYPE S
HR
Backshell Assemblies not supplied with MS connectors.
Performance Specifications - Page 158
Contacts, Sealing Pluts, Assembly Tools - Pages
163, 165
Shell
Size*
TYPE C
BBc
Max.
BBs
Max.
TYPE S
10
1.492 (37.90)
1.842 (46.79)
.286 (7.26)
2.115 (53.72)
.880 (22.35)
.286 (7.26)
12
1.492 (37.90)
1.842 (46.79)
.416 (10.57)
2.250 (57.15)
.950 (24.13)
.416 (10.57)
14
1.492 (37.90)
2.077 (52.76)
.476 (12.09)
2.340 (59.44)
1.010 (25.65)
.476 (12.09)
16
1.492 (37.90)
2.077 (52.76)
.626 (15.90)
2.475 (62.87)
1.070 (27.18)
.626 (15.90)
18
1.492 (37.90)
2.077 (52.76)
.706 (17.93)
2.574 (65.38)
1.130 (28.70)
.706 (17.93)
20
1.552 (39.42)
2.137 (54.28)
.831 (21.11)
2.767 (70.28)
1.190 (30.23)
.831 (21.11)
22
1.552 (39.42)
2.137 (54.28)
.956 (24.28)
2.890 (73.41)
1.260 (32.00)
.956 (24.28)
24
1.552 (39.42)
2.137 (54.28)
1.081 (27.46)
3.012 (76.50)
1.320 (33.53)
1.081 (27.46)
Fs
Max.
TYPE R
GR
Max.
BBR
Max.
HR
Max.
* See page 158 for part numbers. † To order backshell assemblies separately, see page 161.
Contact Arrangments - Page 162
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
160
MIL-C-26482, Series 2 Connectors
PV
Straight Plug
PV76
MS3476
POLARIZING
BOSS
E THD.
A
DIA.
U DIA.
W
.130/.190
(3.30/4.83)
MS34745
PV75
Straight Plug, RFI Shielded
Shell
Size*
A Dia.
Max.
U
Max.
W
Max.
E Thread
UNEF Class 2A
8
.765 (19.43)
.782 (19.86)
1.230 (31.24)
1/2-20
10
.840 (21.34)
.926 (23.52)
1.230 (31.24)
5/8-24
12
.999 (25.37)
1.043 (26.49)
1.230 (31.24)
3/4-20
14
1.139 (28.93)
1.183 (30.05)
1.230 (31.24)
7/8-20
16
1.261 (32.03)
1.305 (33.15)
1.230 (31.24)
1-20
18
1.337 (33.96)
1.391 (35.33)
1.230 (31.24)
1-1/16-18
20
1.477 (37.52)
1.531 (38.89)
1.230 (31.24)
1-3/16-18
22
1.602 (40.69)
1.656 (42.06)
1.230 (31.24)
1-5/16-18
24
1.723 (43.76)
1.777 (45.14)
1.230 (31.24)
1-7/16-18
Shell
Size*
E Thread
UNEF Class 2A
A Dia.
Max.
U
Max.
W
Max.
10
5/8-24
.840 (21.34)
.926 (21.72)
1.230 (31.24)
12
3/4-20
.999 (25.37)
1.043 (26.42)
1.230 (31.24)
14
7/8-20
1.139 (28.93)
1.183 (29.97)
1.230 (31.24)
16
1-20
1.261 (32.03)
1.305 (33.15)
1.230 (31.24)
18
1-1/16-18
1.337 (33.96)
1.391 (35.33)
1.230 (31.24)
20
1-3/16-18
1.477 (37.52)
1.531 (38.89)
1.230 (31.24)
22
1-5/16-18
1.602 (40.69)
1.656 (42.06)
1.230 (31.24)
24
1-7/16-18
1.723 (43.76)
1.777 (45.14)
1.230 (31.24)
* See page 158 for part numbers.
Plug Assemblies with Backshell †
VS REF.
VC REF.
TYPE C
VC
Max.
Shell
Size*
VR REF.
TYPE S
FS
Max.
VS
Max.
GR
Max.
TYPE R
HR
Max.
VR
Max.
8
FS
GR
REF.
TYPE C
TYPE S
HR
TYPE R
Backshell Assemblies not supplied with MS connectors.
Performance Specifications - Page 158
Contacts, Sealing Pluts, Assembly Tools - Pages
163, 165
Contact Arrangments - Page 162
10
1.507 (38.28)
.286 (7.26)
1.857 (47.17)
.880 (22.35)
.286 (7.26)
2.130 (54.10)
12
1.507 (38.28)
.416 (10.57)
1.857 (47.17)
.950 (24.13)
.416 (10.57)
2.265 (57.53)
14
1.507 (38.28)
.476 (12.09)
2.092 (53.14)
1.010 (25.65)
.476 (12.09)
2.355 (59.82)
16
1.507 (38.28)
.626 (15.90)
2.092 (53.14)
1.070 (27.18)
.626 (15.90)
2.490 (63.25)
18
1.507 (38.28)
.706 (17.93)
2.092 (53.14)
1.130 (28.70)
.706 (17.93)
2.589 (65.76)
20
1.507 (38.28)
.831 (21.11)
2.092 (53.14)
1.190 (30.23)
.831 (21.11)
2.722 (69.14)
22
1.507 (38.28)
.956 (24.28)
2.092 (53.14)
1.260 (32.00)
.956 (24.28)
2.845 (72.26)
24
1.507 (38.28)
1.081 (27.46)
2.092 (52.14)
1.320 (33.53)
1.081 (27.46)
2.967 (75.36)
* See page 158 for part numbers. † To order backshell assemblies separatedly, see page 161.
Backshells (Non-MS)
(Not supplied with MS Connectors)
Short
(C)
Straight
(S)
TYPE C (SHORT)
90˚ Degree
(R)
TYPE S (Straight)
TYPE R (90˚)
Shell
Size*
ITT CANNON
Conductive
(Nickel finish)
ITT CANNON
Conductive
(Nickel finish)
ITT CANNON
Conductive
(Nickel finish)
10
057-0716-002
057-0683-002
057-0704-001
12
057-0717-002
057-0684-002
057-0705-001
14
057-0718-002
057-0685-002
057-0706-001
16
057-0719-002
057-0686-002
057-0707-001
18
057-0720-002
057-0687-002
057-0708-001
20
057-0721-002
057-0688-002
057-0709-001
22
057-0722-002
057-0689-002
057-0710-001
24
057-0723-002
057-0731-002
057-0711-001
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
161
MIL-C-26482, Series 2 Connectors
PV
Contact Arrangements
Face view, pin insert
G
A
C
C
A
B
A
B
C
E
A
H
B
E
G
A
D
D
C
D
E
B
B
C
J
F
A
E
B
K
C
C
D
B
D
C
Shell Size
No. of Contacts
Service Rating
B
A
H
F
A
F
8-33*
3-#20
I
8-98*
3-#20
I
10-6
6-#20
I
12-3
3-#16
II
12-8
8-#20
I
12-10
10-#20
I
14-4
4-#12
I
14-5
5-#16
II
A
A
R
A
H
A
J
G
B
M
L
E
Shell Size
No. of Contacts
Service Rating
K
M
L
B
N
T
C
J
D
C
H
14-12
4-#16, 8-#20
I
U
R
D
H
G
B
P
F
R
D
S
C
E
14-18
18-#20
I
V
H
14-19
19-#20
I
16-8
8-#16
II
G
Z
16-23
1-#16, 22-#20
I
E
E
H
G
16-26
26-#20
I
18-8
8-#12
I
A
N
T
A
A
S
H
B
c
N
D
M
E
Z
a
L
18-11
11-#16
II
t
E
u
e
H
f
P
N
M
G
d
r
g
R
F
p
h
A
N
w
v
u
g
f
M
K
L
K
e
R
D
s
T
J
S
t
c
e
H
G
G
FF
E
S
F
24-31
31-#16
I
z
G
AA
BB
h
H
i
m
N
24-19
19-#12
II
F
g
n
P
22-55
55-#20
I
E
f
y
KK
LL
CC
p
D
e
x
JJ
PP
DD
R
H
J
C
d
MM
T
B
c
w
HH
NN
EE
q
S
U
H
F
G
r
U
D
T
V
b
R
A
v
GG
V
b
a
u
t
s
C
c
d
W
E
F
g
X
J
a
d
J
L
V
U
Z
Y
X
W
Q
b
f
F
22-21
21-#16
II
P
a
E
G
B
N
Y
E
DD
EE
h
K
Z
r
H
A
M
L
C
K
D
p
CC
H
K
20-41
41-#20
I
B
P
N
J
L
T
U
G
d
e
M
D
F
J
c
N
Y
HH
FF
L
b
S
V
K
p
r
P
H
Z
C
BB
GG
x
J
B
n
z
P
d
K
X
E
a
n
u
s
f
20-39
2-#16, 37-#20
I
X
AA
22-41
24-#20, 14-#16
I
Shell Size
No. of Contacts
Service Rating
m
j
c
s
V
l
W
R
L
m
g
R
A
T
k
n
j
S
M
M
b
S
G
C
D
Z
t
F
c
R
L
l
h
B
P
W
C
Y
j
T
b
n
p
N
20-16
16-#16
II
S
D
s
e
F
D
a
f
P
E
G
U
C
a
m
U
G
H
J
B
Z
m
R
D
H
U
Z
M
B
X
k
E
g
P
R
E
F
18-32
32-#20
I
l
k
T
S
C
A
Y
X
W
V
X
Y
t
h
J
D
h
b
K
Shell Size
No. of Contacts
Service Rating
S
W
g
l
A
V
C
Y
j
T
N
X
k
U
W
B
V
B
M
C
f
j
P
C
L
F
V
e
d
G
B
U
R
K
K
A
W
A
L
J
D
F
X
J
C
F
D
W
K
F
B
H
V
c
Y
L
E
J
F
G
M
D
U
W
E
H
F
X
K
D
C
C
U
b
a
T
G
B
T
N
B
S
Z
L
H
S
A
R
M
Y
C
V
T
B
P
P
N
A
N
U
J
E
G
F
14-15
1-#16, 14-#20
I
K
C
P
S
E
G
L
B
N
K
R
J
D
M
A
M
P
K
F
A
L
J
j
k
M
K
L
24-61
61-#20
I
* Layouts are available in shell styles MS3470 and MS3476 only.
Alternate Insert Positions
Face view, pin insert
SHELL
SIZE
N
8
W˚
10
X˚
Z˚
12
Y˚
Contact arrangements requiring reduced diameter
for lead-in chamfer on outer row of contact cavities
as indicated below.
Shell
Contact
Arrangements
Contact Cavities
8
33, 38
12
10
C, G
14
12
A, B, C, D, E, F, G, and H
14
18
A, C, E, G, J, and L
14
19
B, D, F, H, K, and M
16
26
A, B, C, D, E, F, G, H, J, K, L, M, N,
P, and R)
18
32
A, B, C, D, E, F,G, H, J, K, L, M, N,
P, R, S, and T
22
41
A, B, C, D, E, F, G, H, J, K, L, M, N,
P, R, S, T, U, V, W, X, and Y
14
16
A, B, C
18
20
22
24
ARRANGEMENT
33
98
6
3
8
10
4
5
12
15
18
19
8
23
26
8
11
32
16
39
41
21
41
55
19
31
61
N
W
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
90˚
90˚
90˚
60˚
45˚
40˚
43˚
17˚
15˚
30˚
54˚
158˚
60˚
180˚
62˚
85˚
238˚
63˚
45˚
16˚
39˚
30˚
30˚
90˚
90˚
POS CODE
X
Y
Z
112˚
155˚
180˚
203˚
270˚
292˚
295˚
92˚
90˚
110˚
90˚
165˚
152˚
270˚
119˚
138˚
318˚
144˚
126˚
135˚
135˚
142˚
165˚
225˚
180˚
184˚
155˚
180˚
315˚
180˚
275˚
241˚
222˚
333˚
252˚
225˚
175˚
264˚
226˚
315˚
225˚
270˚
273˚
234˚
270˚
331˚
338˚
340˚
265˚
347˚
333˚
349˚
314˚
324˚
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
162
MIL-C-26482, Series 2 Connectors
PV
Thru-Bulkhead Receptacle
PV-TBF
X
4 HOLES
.125/.115 (3.18/2.92) DIA.
SIZES 8-22
.152/.142 (3.86/3.61) DIA.
SIZES 24 ONLY
X
POLARIZING
GROOVE
K
A
DIA.
R
(TP)
A
DIA.
PANEL
PANEL
M
FRONT
PANEL MOUNTING
Shell
Size
A
Dia +_.003 (0.08)
REAR
PANEL MOUNTING
K
+_.016 (0.41)
.140 RAD.
MAX.
L
L
Max.
M
+_.016 (0.41)
R
(TP)
S
Max.
S
(TYP)
X
Max.
8
.471 (11.96)
.062 (1.57)
1.125 (28.58)
.577 (14.66)
.594 (15.09)
.828 (21.03)
.218 (5.54)
10
.588 (14.94)
.062 (1.57)
1.125 (28.58)
.577 (14.66)
.719 (18.26)
.954 (24.23)
.218 (5.54)
12
.748 (19.00)
.062 (1.57)
1.125 (28.58)
.577 (14.66)
.812 (20.62)
1.047 (26.59)
.218 (5.54)
14
.873 (22.17)
.062 (1.57)
1.125 (28.58)
.577 (14.66)
.906 (23.01)
1.141 (28.98)
.218 (5.54)
16
.998 (25.35)
.062 (1.57)
1.125 (28.58)
.577 (14.66)
.969 (24.61)
1.234 (31.34)
.218 (5.54)
18
1.123 (28.52)
.062 (1.57)
1.125 (28.58)
.577 (14.66)
1.062 (26.97)
1.328 (33.73)
.218 (5.54)
20
1.248 (31.70)
.094 (2.39)
1.406 (35.71)
.703 (17.86)
1.156 (29.36)
1.453 (36.91)
.344 (8.74)
22
1.373 (34.87)
.094 (2.39)
1.406 (35.71)
.703 (17.86)
1.250 (31.75)
1.578 (40.08)
.344 (8.74)
24
1.498 (38.05)
.094 (2.39)
1.406 (35.71)
.703 (17.86)
1.375 (34.92)
1.703 (43.26)
.311 (7.90)
Notes: 1) Shell available in conductive (nickel finish) only.
2) Contacts are nonremovable.
How to Order - PV-TBF
PV-TBF 10
-6
PS W
SERIES PREFIX
SHELL SIZE
INSERT ARRANGEMENTS
CONTACT STYLE
SERIES PREFIX
PV-TBF - ITT Cannon prefix
ALTERNATE POLARIZING POSITION
CONTACT STYLE
SHELL SIZE
Pin and socket
8 through 24
ALTERNATE POLARIZING POSITION
INSERT ARRANGEMENTS
10-6, 14-19, 16-8, 16-26, 18-32, 20-39, 20-
No designation required for normal. Standard MS
alternate posistions available.
41, 22-41, 22-55, 24-61.
Notes: 1) Shell available in conductive (nickel finish) only.
2) Contacts are nonremovable.
3) Designed to MS3119 configuration and
meets the performance requirements of
MIL-C-26482 Series 2.
Tooling
Crimp Tool
Insertion/Extraction Tools
M22520/1-01 Crimp Tool
with M22520/1-02 Turret
CBT 520/530
Wire Contact Tools
Contact
Size
Unwired Contact
Tools
Cannon Pt. No.
Cannon
Part Number
M81969
Part Number
Insertion
Color Tip
Extraction
Color Tip
Superseded
Mil. Pt. No.
20
CIET-20-11
(274-7001-006)
M81969/14-11
Red
White
MS27534-20, MS3447-20, NAS1664-20
274-7007-000
16
CIET-16-03
(274-7002-000)
M81969/14-03
Blue
White
MS27534-16, MS3447-16, NAS1664-16
274-7008-000
12
CIET-12-04
(274-7003-000)
M81969/14-04
Yellow
White
MS27534-12, MS3447-12, NAS1664-12
274-7009-00
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
163
MIL-C-26482, Series 2 Connectors
PV
Panel Cutouts
Jam Nut Receptacle
Narrow Flange and Thru-Bulkhead/Wide Flange
F DIA.
+.010 (0.25)
A -.000 (0.00)
DIA.
+
_.005 (+
_.13)
R
(TYP.)
E
T DIA. 4 MTG. HOLES
Shell
Size
E
+
_.005 (0.13)
F Dia.
+
_.005 (0.13)
10
.661 (16.79)
.697 (17.70)
12
.824 (20.93)
.895 (22.73)
14
.948 (24.08)
1.010 (25.65)
16
1.072 (27.23)
1.135 (28.33)
18
1.197 (30.40)
1.260 (32.00)
20
1.322 (33.58)
1.385 (35.18)
22
1.447 (36.75)
1.510 (38.35)
24
1.572 (39.93)
1.635 (41.53)
Flange Front
and Rear
Mounting
Shell
Size
A
Dia.
Flange Front
and Rear
Mounting
Mounting
Hole
R
T
Dia.
Screw
Size
Shell
Size
A
Dia.
Mounting
Hole
R
T
Dia.
Screw
Size
8
.620 (15.75)
.594 (18.26)
.125 (3.14)
#4
10
.740 (18.80)
.812 (20.62)
.155 (3.97)
#6
10
.740 (18.80)
.719 (18.26)
.125 (3.17)
#4
12
.864 (21.95)
.938 (23.93)
.155 (3.97)
#6
12
.864 (21.95)
.812 (20.62)
.125 (3.17)
#4
14
.990 (25.15)
1.031 (26.19)
.155 (3.97)
#6
14
.990 (25.15)
.906 (23.01)
.125 (3.17)
#4
16
1.118 (28.40)
1.125 (28.58)
.155 (3.97)
#6
16
1.118 (28.40)
.969 (24.61)
.125 (3.17)
#4
18
1.240 (31.50)
1.203 (30.56)
.155 (3.97)
#6
18
1.240 (31.50)
1.062 (26.97)
.125 (3.17)
#4
20
1.366 (34.70)
1.297 (32.94)
.155 (3.97)
#6
20
1.366 (34.70)
1.156 (29.36)
.125 (3.17)
#4
22
1.490 (37.85)
1.375(34.92)
.155 (3.97)
#6
22
1.490 (37.85)
1.250 (31.75)
.125 (3.17)
#4
24
1.616 (41.05)
1.500 (38.10)
.155 (3.97)
#6
24
1.616 (41.05)
1.375 (34.92)
.155 (3.97)
#6
Panel Thickness
Shown here are the maximum panel thickness
Narrow Flange Receptacle
including screw head height allowable to ensure
Wide Flange Receptacle
.125 (3.18) Max. (backshell
clearance for front mount)
complete connector operation.
.125 (3.18) Max. (backshell
clearance for front mount)
.118 (3.00mm) maximum for
shell size 10 thru 18 (rear mount)
.212 (5.38mm maximum for
shell size 20 thru 24 (rear mount)
.087 (2.21mm) maximum for
shell size 10 thru 18 (rear mount)
.212 (5.38mm maximum for
shell size 20 thru 24 (rear mount)
BACKSHELL
BACKSHELL
COUPLING NUT
COUPLING NUT
Dummy Stowage Receptacles
How to Order
PV DESCRIPTION
MS DESCRIPTION
PVS
SERIES PREFIX
PVS - ITT Cannon prefix
DUMMY RECEPTACLE INDICATOR
- 15 -PV
CLASS
G - Conductive finish (nickel)
A - Nonconductive finish (anodized)
SHELL SIZE
8 though 24
-15
G
12
MS
3115 -12
G DIA.
L
4 HOLES
SERIES PREFIX
MS - Complies with MIL-C-26482
A
DIA
MS STANDARD
3115 - Dummy receptacle
SHELL SIZE
8 through 24
CLASS
L - Conductive finish (nickel)
A - Nonconductive finish (anodized)
J
E
(TP)
K
F
(TYP)
NOTE: Usable on KPT/KPSE series also.
Shell
Size
A
Dia. Max.
E
(TYP)
F
Max.
G
Max.
J
Max.
K
Max.
8
.474 (12.04)
.594 (15.09)
.828 (21.03)
.125 (3.18)
.493 (12.52)
.078 (1.98)
10
.591 (15.01)
.719 (18.26)
.954 (24.23)
.125 (3.18)
.493 (12.52)
.078 (1.98)
12
.751 (19.08)
.812 (20.62)
1.047 (26.59)
.125 (3.18)
.493 (12.52)
.078 (1.98)
14
.876 (22.25)
.906 (23.01)
1.141 (28.98)
.125 (3.18)
.493 (12.52)
.078 (1.98)
16
1.001 (25.43)
.969 (24.61)
1.234 (31.34)
.125 (3.18)
.493 (12.52)
.078 (1.98)
18
1.126 (28.60)
1.062 (26.97)
1.328 (33.73)
.125 (3.18)
.493 (12.52)
.078 (1.98)
20
1.251 (31.78)
1.156 (29.36)
1.453 (36.91)
.125 (3.16)
.587 (14.91)
.110 (2.79)
22
1.376 (34.95)
1.250 (31.75)
1.578 (40.08)
.125 (3.18)
.587 (14.91)
.110 (2.79)
24
1.501 (38.13)
1.375 (34.92)
1.703 (43.26)
.152 (3.86)
.620 (15.75)
.110 (2.79)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
164
MIL-C-26482, Series 2 Connectors
PV
Protective Metal Caps
Plugs
.047
1,19mm)
Max.
L
.169 +_ .008 DIA.
(4.29 +
_ 0.20)
A
F
H +.500 (12.7)
-.250 (6.35)
M
CHAIN LENGTH
Receptacles
PVS
80
-12
C
A
MS
3180
-12
C
A
SERIES PREFIX
PVS - ITT Cannon Prefix
MS - Complies with MIL-C-26482 (Series 2)
TYPE
80 or 3180 - Plug Cap
81 or 3181 - Receptacle Cap
SHELL SIZE
8 thru 24
N
R
TERMINATION STYLE
C - Sash chain (MS approved)
N - Sash chain with ring (81 or3181 type only) MS approved
.094
2,39mm)
Max.
FINISH
Q
B
A - Hard anodic, non-conductive (MS approved)
G - Nickel, conductive (not MS) (PVS only)
H +.500 (12.7)
-.250 (6.35)
CHAIN LENGTH
NOTE: Usable on KPT/KPSE series also.
N style used primarily on Jam Nut Receptacle.
Shell
Size
A
Max. Dia.
B
Max.
F
Max. Dia.
H
L
Max.
M
Max.
N
Min. Dia.
Q
Max.
R
Max.
8
.474 (12.04)
.486 (12.34)
.719 (18.26)
3.000 (76.20)
.562 (14.27)
.399 (10.13)
.578 (14.68)
.734 (18.64)
.562 (14.27)
10
.591 (15.01)
.607 (15.42)
.844 (21.44)
3.000 (76.20)
.562 (14.27)
.399 (10.13)
.703 (17.86)
.859 (21.82)
.562 (14.27)
12
.751 (19.08)
.766 (19.46)
1.000 (25.40)
3.500 (76.20)
.562 (14.27)
.399 (10.13)
.891 (22.63
1.000 (25.40)
.562 (14.27)
14
.876 (22.25)
.890 (22.60)
1.125 (28.58)
3.500 (88.90)
.562 (14.27)
.399 (10.13)
1.016 (25.81)
1.125 (28.58)
.562 (14.27)
16
1.001 (25.43)
1.015 (25.78)
1.250 (31.75)
3.500 (88.90)
.562 (14.27)
.399 (10.13)
1.141 (28.98)
1.250 (31.75)
.562 (14.27)
18
1.126 (28.60)
1.141 (28.98)
1.375 (34.93)
3.500 (88.90)
.562 (14.27)
.399 (10.13)
1.266 (32.16)
1.375 (34.93)
.562 (14.27)
20
1.251 (31.78)
1.265 (32.13)
1.500 (38.10)
4.000 (101.60)
.625 (15.88)
.461 (11.71)
1.391 (35.33)
1.500 (38.10)
.562 (14.27)
22
1.376 (34.96)
1.390 (35.31)
1.625 (41.26)
4.000 (101.60)
.625 (15.88)
.461(11.71)
1.516 (38.51)
1.625 (41.26)
.562 (14.27)
24
1.501 (38.13)
1.515 (38.48)
1.750 (44.45)
4.000 (101.60)
.658 (16.71)
.494 (12.55)
1.641 (41.68)
1.750 (44.45)
.602 (15.29)
Contacts
Thermocouple Contacts
Contact
Size
Color Brands
Contact
Size
Type
M39029
Number
1st
2nd
3rd
ITT Cannon
Alumel
Chromal
20
Socket
M39029/5-115
Brown
Brown
Green
031-9174-004
20 Pin
030-1831-000
030-1832-000
20
Pin
M39029/4-110
Brown
Brown
Black
030-9173-006
20 Socket
031-1013-000
031-1014-000
16
Socket
M39029/5-116
Brown
Brown
Blue
031-9206-006
16
Pin
M39029/4-111
Brown
Brown
Brown
030-9205-007
12
Socket
M39029/5-118
Brown
Brown
Grey
031-9186-003
12
Pin
M39029/4-113
Brown
Brown
Orange
030-9185-003
Contacts for printed circuit applications are also
available. Consult factory.
Wire Hole Fillers
Part Number
Contact
Size
Cannon
Military
20
225-0070-000
MS27488-20
16
225-0071-000
MS27488-16
12
225-0072-000
MS27488-12
Superseded
Mil. Pt. No.
MS3187-20
M83723/28-20
MS3187-16
M83723/28-16
MS3187-12
M83723/28-12
Color
Code
Red
Blue
Yellow
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
165
MIL-C-26482, Series 2 Connectors
PV
Assembly Procedures
STRIPPING AND CRIMPING
3/16" for
#20 CONTACT
9/32" for
#16 CONTACT
Right
9/32" for
#12 CONTACT
Wrong
1. Strip wires according to contact size: 3/16" for #20 and 9/32"for
#16 and#12. #20 contacts accommodate AWG wire sizes 20, 22, or
24; #16 accommodates 16, 18 or 20; and #12 accommodates 12 or 14.
2. Insert wire into rear of contact. Wire insulation must butt against
rear of contact. Wire must be visible thru inspection hole.
3. Use M22520/1-01 crimp tool with proper crimp locator M22520/
1-02. The color code hand on the contact (red for #20, blue for #16
and yellow for #12) must match the color code of the locator and the
insertion tool throughout the crimping and assembly operations.
CONTACT INSERTION
OPENING
COLORED END
FOR INSERTION
4. Insert contact and wire into tool jaws. To crimp, squeeze handles
together fully until ratchet release and allows handles to expand;
otherwise, contact cannot be extracted from tool jaws. Maintain slight
insertion pressure on wire while crimping contact to wire.
1. Remove backshell and put wired contacts thru cable clamp opening.
3. Slide back tool on wire shile holding thumb against wire at opening.
Wire will slip into tool.
NOTE: Socket contacts should be inserted partially into grommet
by hand before using insertion tool.
4. With tool pressed against shoulder of contact, starting at the center
cavity, insert wired contact and tool into properly identified cavity at
rear of plug with firm, even pressure. Do not use excessive pressure.
2. Used colored end of CIET tool for insertion. Place wire into tool at
large opening. To facilitate contact insertion, a 6-in. min. free lenght of
wire is recommended.
5. When contact bottoms, a slight click can be heard as tines of metal
reataining clip snaps into place behind contact shoulder.
CONTACT EXTRACTION
6. Withdraw tool from rear of plug. To be sure that contact is locked,
pull back lightly on wire. Then remove tool from wire and proceed with
other contacts.
7. After all contacts are inserted, fill unwired cavities with sealing
plugs (insert head last and leave end protruding for ease of removal),
assemble backshell on rear of connector.
1. Remove backshell and slide back along wires to allow access. To
extract a contact, use white end of CIET tool. Place wire into tool at
large opening. Slide back tool on wire while holding thumb against wire
at opening. Wire will slip into tool.
COMPLETION
BROKEN CIRCLE
BREAK
2. Push tool into rear of plug until it bottoms. At this point, tool
releases tines on retaining clip so that contact can be extracted.
3. While maintaining slight insertion force on tool, firmly hold wire
against serrated shoulder at center of tool and extract both wired
contact and tool from plug.
4. Check face of plug or receptacle for proper contact installation. In
socket inserts with a large number of contact, cavities are identified in
a spiral pattern. A projecting line from the spiral indictates omission of a
letter; a broken circle around a cavity indicates transition between
capitals and lower case and double letters.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
166
Similar pages