OKI MSM7533V 2ch single rail codec Datasheet

E2U0020-28-81
This
version: Aug. 1998
MSM7533H/7533V/7534
Previous version: Nov. 1996
¡ Semiconductor
MSM7533H/7533V/7534
¡ Semiconductor
2ch Single Rail CODEC
GENERAL DESCRIPTION
The MSM7533 and MSM7534 are two-channel CODEC CMOS ICs for voice signals ranging from
300 to 3400 Hz. These devices contain filters for A/D and D/A conversion.
Designed especially for a single-power supply and low-power applications, these devices
contain two-channel AD/DA converters in a single chip and achieve a reduced footprint and a
reduced number of external components.
The MSM7533 and MSM7534 are best suited for an analog interface to an echo canceller DSP used
in digital telephone terminals, digital PABXs, and hands free terminals.
FEATURES
• Single power supply: +5 V
• Power consumption
Operating mode:
35 mW Typ.
74 mW Max.
VDD = 5 V
Power save mode:
7 mW Typ.
16 mW Max.
VDD = 5 V
Power down mode:
0.05 mW Typ.
0.3 mW Max.
VDD = 5 V
• ITU-T Companding law
MSM7533H:
m-law
MSM7534:
A-law
MSM7533V:
m/A-law pin selectable
• Built-in PLL eliminates a master clock
• The PCM interface can be switched between 2 channel serial/parallel
• Transmission clock: 64/128/256/512/1024/2048 kHz
96/192/384/768/1536/1544/200 kHz
(During 2 channel serial mode, the 64 and 96 kHz clocks are disabled)
• Adjustable transmit gain
• Built-in reference voltage supply
• Analog output can directly drive a 600 W line transformer
• Package options:
20-pin plastic skinny DIP (DIP20-P-300-2.54-S1) (Product name : MSM7533HRS)
(Product name : MSM7533VRS)
(Product name : MSM7534RS)
24-pin plastic SOP (SOP24-P-430-1.27-K)
(Product name : MSM7533HGS-K)
(Product name : MSM7533VGS-K)
(Product name : MSM7534GS-K)
1/18
¡ Semiconductor
MSM7533H/7533V/7534
BLOCK DIAGRAM
AIN1
–
+
RC
LPF
8th
BPF
–
+
RC
LPF
8th
BPF
AD
CONV.
DOUT1
DOUT2
TCONT
GSX1
AIN2
GSX2
AOUT1
AOUT2
SGC
PLL
AUTO
ZERO
–
+
BCLK
RTIM
5th
LPF
S&H
5th
LPF
SG
GEN
S&H
VR
GEN
RSYNC
(ALAW)
DA
CONV.
–
+
XSYNC
RCONT
PWD
Logic
CHPS
DIN1
DIN2
PDN
VDD
AG
DG
2/18
¡ Semiconductor
MSM7533H/7533V/7534
PIN CONFIGURATION (TOP VIEW)
SGC 1
20 AIN2
AOUT2 2
19 GSX2
AOUT1 3
18 GSX1
PDN 4
17 AIN1
SGC 1
24 AIN2
AOUT2 2
23 GSX2
NC 3
22 GSX1
AOUT1 4
21 AIN1
PDN 5
CHPS 5
VDD 6
DG 7
16 (ALAW) *
15 AG
14 BCLK
RSYNC 8
13 XSYNC
DIN2 9
12 DOUT2
DIN1 10
11 DOUT1
CHPS 6
20 NC
19 (ALAW) *
NC 7
18 AG
VDD 8
17 NC
DG 9
16 BCLK
RSYNC 10
15 XSYNC
DIN2 11
14 DOUT2
DIN1 12
13 DOUT1
NC : No connect pin
24-Pin Plastic SOP
20-Pin Plastic Skinny DIP
* The ALAW pin is only applied to the MSM7533VRS/MSM7533VGS-K.
3/18
¡ Semiconductor
MSM7533H/7533V/7534
PIN AND FUNCTIONAL DESCRIPTIONS
AIN1, AIN2, GSX1, GSX2
AIN1 and AIN2 are the transmit analog inputs for channels 1 and 2.
GSX1 and GSX2 are the transmit level adjustments for channels 1 and 2.
AIN1 and AIN2 are inverting inputs for the op-amp; GSX1 and GSX2 are connected to the output
of the op-amp and are used to adjust the level, as shown below.
When not using AIN1 and AIN2, connect AIN1 to GSX1 and AIN2 to GSX2. During power saving
and power down mode, the GSX1 and GSX2 outputs are at AG voltage.
R2
CH1
Analog Input
C1
R1
C2
R3
AIN1 –
+
R4
CH2
Analog Input
GSX1
GSX2
AIN2
–
+
CH1 Gain
Gain = R2/R1 £ 10
R1: Variable
R2 > 20 kW
C1 > 1/(2 ¥ 3.14 ¥ 30 ¥ R1)
CH2 Gain
Gain = R4/R3 £ 10
R3: Variable
R4 > 20 kW
C2 > 1/(2 ¥ 3.14 ¥ 30 ¥ R3)
AOUT1, AOUT2
AOUT1 is the receive analog output for channel 1 and AOUT2 is used for channel 2.
The output signal has an amplitude of 3.4 VPP above and below the signal ground voltage (SG).
When the digital signal of +3 dBmO is input to DIN1 and DIN2, it can drive a load of 600 W or
more.
During power saving or power down mode, these outputs are at the voltage level of SG with a
high impedance.
4/18
¡ Semiconductor
MSM7533H/7533V/7534
VDD
Power supply for +5 V.
A power supply for an analog circuit of the system which the device is applied should be used.
A bypass capacitor of 0.1 mF to 1 mF with excellent high frequency characteristics and a capacitor
of 10 mF to 20 mF should be connected between this pin and the AG pin if needed.
DIN1
DIN1 is the PCM signal input for channel 1, when the parallel mode is selected.
A serial PCM signal input to this pin is converted to an analog signal in synchronization with the
RSYNC signal and BCLK signal.
The analog signal is output from the AOUT1 pin.
The data rate of the PCM signal is equal to the frequency of BCLK signal.
The PCM signal is shifted at a falling edge of the BCLK signal and latched into the internal register
when shifted by eight bits.
The start of the PCM data (MSD) is identified at the rising edge of RSYNC.
When the serial mode is selected, this pin is not used and should be connected to GND (0 V).
DIN2
DIN2 is the PCM signal input for channel 2, when the parallel mode is selected.
A serial PCM signal input to this pin is converted to an analog signal in synchronization with the
RSYNC signal and BCLK signal.
The analog signal is output from the AOUT2 pin.
The data rate of the PCM signal is equal to the frequency of BCLK signal.
The PCM signal is shifted at a falling edge of the BCLK signal and latched into the internal register
when shifted by eight bits.
The start of the PCM data (MSD) is identified at the rising edge of RSYNC.
When the serial mode is selected, this pin is used for the 2ch multiplexed PCM signal input.
BCLK
Shift clock signal input for the DIN1, DIN2, DOUT1, and DOUT2 signals.
The frequency, equal to the data rate, is 64, 96, 128, 192, 256, 384, 512, 768, 1024, 1536, 1544, 2048,
or 200 kHz. Setting this signal to logic "1" or "0" drives both transmit and receive circuits to the
power saving state.
5/18
¡ Semiconductor
MSM7533H/7533V/7534
RSYNC
Receive synchronizing signal input.
The eight bits PCM data required are selected from serial PCM signals on the DIN1 and DIN2
pins by the receive synchronizing signal.
Signals in the receive section are synchronized by this synchronizing signal. This signal must be
synchronized in phase with the BCLK (generated from the same clock source as BCLK). The
frequency should be 8 kHz ±50 ppm to guarantee the AC characteristics which are mainly the
frequency characteristic of the receive section.
However, if the frequency characteristic of the system used is not strictly specified, this device
can operate in the range of 6 kHz to 9 kHz, but the electrical characteristics in this specifications
are not guaranteed.
XSYNC
Transmit synchronizing signal input.
The PCM output signal from the DOUT1 and DOUT2 pins is output in synchronization with this
transmit synchronizing signal. This synchronizing signal triggers the PLL and synchronizes all
timing signals of the transmit section.
This synchronizing signal must be synchronized in phase with BCLK.
The frequency should be 8 kHz ±50 ppm to guarantee the AC characteristics which are mainly
the frequency characteristic of the transmit section.
However, if the frequency characteristic of the system used is not strictly specified, this device
can operate in the range of 6 kHz to 9 kHz, but the electrical characteristics in this specification
are not guaranteed.
Setting this signal to logic "1" or "0" drives both transmit and receive circuits to power saving
state.
6/18
¡ Semiconductor
MSM7533H/7533V/7534
DOUT1
PCM signal output of channel 1 when the parallel mode is selected.
The PCM output signal is output from MSD in a sequential order, synchronizing with the rising
edge of the BCLK signal.
MSD may be output at the rising edge of the XSYNC signal, based on the timing between BCLK
and XSYNC.
This pin is in a high impedance state except during 8-bit PCM output. It is also in a high
impedance sate during power saving or power down mode.
When the serial mode is selected, this pin is for the output of serial multiplexed 2ch PCM signal.
A pull-up resistor must be connected to this pin because it is an open drain output.
This device is compatible with the ITU-T recommendation on coding law and output coding
format.
The MSM7534(A-law) outputs the character signal, inverting the even bits.
PCMIN/PCMOUT
Input/Output Level
MSM7533H (m-law)
MSD
MSM7534 (A-law)
MSD
+Full scale
1 0 0 0
0 0 0 0
1 0 1 0
1 0 1 0
+0
1 1 1 1
1 1 1 1
1 1 0 1
0 1 0 1
–0
0 1 1 1
1 1 1 1
0 1 0 1
0 1 0 1
–Full scale
0 0 0 0
0 0 0 0
0 0 1 0
1 0 1 0
DOUT2
PCM signal outputs for channel 2 when the parallel mode is selected.
The PCM output signal is output from MSD in a sequential order, synchronizing with the rising
edge of the BCLK signal.
MSD may be output at the rising edge of the XSYNC signal, based on the timing between BCLK
and XSYNC.
This pin is in a high impedance state except during 8-bit PCM output. It is also in a high
impedance state during power saving or power down modes.
When the serial mode is selected, this pin is left open.
A pull-up resistor must be connected to this pin because it is an open drain output.
This device is compatible with the ITU-T recommendation on coding law and output coding
format.
The MSM7534(A-law) outputs the character signal, inverting the even bits.
7/18
¡ Semiconductor
MSM7533H/7533V/7534
CHPS
Control signal input for the mode selection of PCM input and output.
When this signal is at a logic "1" level, the PCM input and output are in the parallel mode. The
PCM data of CH1 and CH2 is input to DIN1 and DIN2, and output from DOUT1 and DOUT2
with the same timing.
When this signal is at a logic "0" level, the PCM input and output is in the serial mode. The PCM
data of CH1 and CH2 is input to DIN2 and output from DOUT1 as time division multiplexed
data.
The parallel mode is conveniently applied to the digital interface to the echo canceller (MSM7520),
and the serial mode is applied to the digital interface to PCM multiplexer's for PABXs.
PDN
Power down control signal.
When PDN is at a logic "0" level, both transmit and receive circuits are in a power down state.
AG
Analog signal ground.
DG
Ground for the digital signal circuits.
This ground is separate from the analog signal ground. The DG pin must be connected to the AG
pin on the printed circuit board to make a common analog ground.
SGC
Used to generate the signal ground voltage level by connecting a bypass capacitor.
Connect a 0.1 mF capacitor with excellent high frequency characteristics between the AG pin and
the SGC pin.
ALAW
Control signal input of the companding law selection.
Provides only for the MSM7533VRS/MSM7533VGS-K. The CODEC will operate in the m-law
when this pin is at a logic "0" level and the CODEC will operate in the A-law when this pin is at
a logic "1" level. The CODEC operates in the m-law if the pin is left open, since this pin is internally
pulled down.
8/18
¡ Semiconductor
MSM7533H/7533V/7534
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Condition
Rating
Unit
VDD
—
0 to 7
V
Analog Input Voltage
VAIN
—
–0.3 to VDD + 0.3
V
Digital Input Voltage
VDIN
—
–0.3 to VDD + 0.3
V
Storage Temperature
TSTG
—
–55 to +150
°C
Power Supply Voltage
RECOMMENDED OPERATING CONDITIONS
Parameter
Power Supply Voltage
Operating Temperature
Symbol
VDD
Condition
Voltage must be fixed
Ta
—
Min.
Typ.
Max.
Unit
4.75
5.0
5.25
V
–30
+25
+85
°C
—
—
3.4
VPP
2.2
—
VDD
V
0
—
0.8
V
Analog Input Voltage
VAIN
Digital Input High Voltage
VIH
Digital Input Low Voltage
VIL
Clock Frequency
FC
Sync Pulse Frequency
FS
XSYNC, RSYNC
6.0
8.0
9.0
Clock Duty Ratio
DC
BCLK
40
50
60
%
Digital Input Rise Time
tIr
XSYNC, RSYNC, BCLK, DIN1,
—
—
50
ns
Digital Input Fall Time
tIf
DIN2, PDN, CHPS
—
—
50
ns
tXS
BCLKÆXSYNC, See Timing Diagram
100
—
—
ns
tSX
XSYNCÆBCLK, See Timing Diagram
100
—
—
ns
tRS
BCLKÆRSYNC, See Timing Diagram
100
—
—
ns
tSR
RSYNCÆBCLK, See Timing Diagram
100
—
—
ns
Transmit Sync Pulse Setting Time
Receive Sync Pulse Setting Time
Gain = 1
XSYNC, RSYNC, BCLK,
DIN1, DIN2, PDN, CHPS
BCLK = (eliminates 64, 96 kHz,
when 2ch serial mode)
64, 128, 256, 512, 1024,
2048, 96, 192, 384, 768,
kHz
1536, 1544, 200
kHz
Sync Pulse Width
tWS
XSYNC, RSYNC
1 BCLK
—
100
ms
DIN Set-up Time
tDS
DIN1, DIN2
100
—
—
ns
DIN Hold Time
Digital Output Load
tDH
DIN1, DIN2
100
—
—
ns
RDL
Pull-up resistor, DOUT1, DOUT2
0.5
—
—
kW
CDL
DOUT1, DOUT2
—
Analog Input Allowable DC Offset
Voff
Allowable Jitter Width
—
—
100
pF
Transmit gain stage, Gain = 1 VDD/2–100
—
VDD/2+100
mV
Transmit gain stage, Gain = 10 VDD/2–10
—
VDD/2+10
mV
—
500
ns
XSYNC, RSYNC
—
9/18
¡ Semiconductor
MSM7533H/7533V/7534
ELECTRICAL CHARACTERISTICS
DC and Digital Interface Characteristics
(VDD = +5 V ±5%, Ta = –30°C to +85°C)
Parameter
Symbol
IDD1
Condition
Operating mode, No signal
Min.
Typ.
Max.
Unit
—
7.0
14.0
mA
—
1.3
3.0
mA
Power-save mode, PDN = 1,
Power Supply Current
IDD2
XSYNC or BCLK OFF
IDD3
Power-down mode, PDN = 0
—
0.01
0.05
mA
Input High Voltage
VIH
—
2.2
—
VDD
V
Input Low Voltage
VIL
—
0.0
—
0.8
V
High Level Input Leakage Current
IIH
—
—
—
2.0
mA
Low Level Input Leakage Current
IIL
—
—
—
0.5
mA
Digital Output Low Voltage
VOL
0.0
0.2
0.4
V
Pull-up resistance > 500 W
Digital Output Leakage Current
IO
—
—
—
10
mA
Input Capacitance
CIN
—
—
5
—
pF
Transmit Analog Interface Characteristics
(VDD = +5 V ±5%, Ta = –30°C to +85°C)
Parameter
Min.
Typ.
Max.
Unit
Input Resistance
Symbol
RINX
AIN1, AIN2
Condition
10
—
—
MW
Output Load Resistance
RLGX
GSX1, GSX2
20
—
—
kW
Output Load Capacitance
CLGX
with respect to SG
—
—
30
pF
Output Amplitude
VOGX
–1.7
—
+1.7
V
Offset Voltage
VOSGX
–20
—
+20
mV
Gain = 1
Receive Analog Interface Characteristics
(VDD = +5 V ±5%, Ta = –30°C to +85°C)
Parameter
Symbol
Output Load Resistance
RLAO
Output Load Capacitance
CLAO
Output Amplitude
VOAO
Offset Voltage
VOSAO
Condition
AOUT1, AOUT2 (each) with
respect to SG
AOUT1, AOUT2
AOUT1, AOUT2, RL = 0.6 kW,
with respect to SG
AOUT1, AOUT2
with respect to SG
Min.
Typ.
Max.
Unit
0.6
—
—
kW
—
—
50
pF
–1.7
—
+1.7
V
–100
—
+100
mV
10/18
¡ Semiconductor
MSM7533H/7533V/7534
AC Characteristics
(VDD = +5 V ±5%, Ta = –30°C to +85°C)
Parameter
Transmit Frequency Response
Receive Frequency Response
Loss T1
Freq.
(Hz)
60
Loss T2
300
Loss T3
1020
Loss T4
2020
Loss T5
3000
Symbol
Receive Gain Tracking
Typ.
Max.
Unit
20
26
—
dB
–0.15
+0.07
+0.20
dB
Reference
0
dB
–0.15
–0.04
+0.20
dB
–0.15
+0.06
+0.20
dB
Loss T6
3400
0
0.4
0.80
dB
300
–0.15
–0.03
+0.20
dB
Loss R2
1020
Loss R3
2020
Loss R4
Loss R5
Reference
0
dB
–0.15
–0.02
+0.20
dB
3000
–0.15
+0.15
+0.20
dB
3400
0.0
0.45
0.80
dB
SD T1
3
35
43
—
SD T2
0
35
41
—
1020
–30
35
38
—
SD T4
–40
29
31.5
—
SD T5
–45
24
27
—
SD R1
3
36
43
—
SD R2
0
36
41
—
SD R3
1020
*1
–30
36
40
—
SD R4
–40
30
33.5
—
SD R5
–45
25
30
—
GT T1
3
–0.3
+0.01
+0.3
GT T3
*1
–10
GT T2
Transmit Gain Tracking
Min.
Loss R1
Transmit Signal to Distortion Ratio SD T3
Receive Signal to Distortion Ratio
Level Condition
(dBm0)
–0.3
–0.09
+0.3
GT T4
–50
–0.5
–0.09
+0.5
GT T5
–55
–1.2
–0.1
+1.2
GT R1
3
–0.3
0
+0.3
GT R2
–10
1020
dB
Reference
–40
GT R3
1020
dB
dB
Reference
–40
–0.3
+0.09
+0.3
GT R4
–50
–0.5
+0.2
+0.5
GT R5
–55
–1.2
+0.23
+1.2
dB
*1 Psophometric filter is used
11/18
¡ Semiconductor
MSM7533H/7533V/7534
AC Characteristics (Continued)
(VDD = +5 V ±5%, Ta = –30°C to +85°C)
Parameter
Idle Channel Noise
Symbol
Freq.
(Hz)
Nidle T
—
Nidle R
—
Level Condition
(dBm0)
AIN = SG
—
*1*2
—
(Deviation of Temperature and Power)
Typ.
Max.
–73.5
–70
–71.5
–68
—
–78
–75
—
Unit
dBmOp
AV T
VDD = 5.0 V
0.821
0.850
0.880
AV R
Ta = 25°C
*4
0.821
0.850
0.880
–0.2
—
+0.2
dB
–0.2
—
+0.2
dB
—
—
0.6
ms
—
0.19
0.75
—
0.11
0.35
—
0.02
0.125
Absolute Level (Initial Difference)
Absolute Level
*1 *3
Min.
AV Tt
1020
0
VDD = 5 V ±
5%
Ta = –30
AV Rt
to 85°C *4
Vrms
A to A
Absolute Delay
Td
1020
0
BCLK
= 64 kHz
tgd T1
Transmit Group Delay
Receive Group Delay
500
tgd T2
600
tgd T3
1000
*5
0
tgd T4
2600
—
0.05
0.125
tgd T5
2800
—
0.07
0.75
tgd R1
500
tgd R2
600
tgd R3
1000
tgd R4
2600
tgd R5
2800
*5
0
CR T
Crosstalk Attenuation
CR R
CR CH
*1
*2
*3
*4
*5
1020
0
—
0.00
0.75
—
0.00
0.35
—
0.00
0.125
—
0.09
0.125
—
0.12
0.75
TRANS Æ RECV
75
80
—
RECV Æ TRANS
70
76
—
CH to CH
73
78
—
ms
ms
dB
Psophometric filter is used
Upper is specified for the m-law, lower for the A-law
Input "0" code to PCMIN
AVT is defined between GSX and DOUT and AVR between DIN and AOUT
Minimum value of the group delay distortion
12/18
¡ Semiconductor
MSM7533H/7533V/7534
AC Characteristics (Continued)
(VDD = +5 V ±5%, Ta = –30°C to +85°C)
Parameter
Discrimination
Out-of-band Spurious
Intermodulation Distortion
Power Supply Noise Rejection Ratio
Freq.
Level Condition
(Hz)
(dBm0)
0 to
4.6 kHz to
DIS
0
4000 Hz
72 kHz
Symbol
S
IMD
300 to
0
3400
fa = 470
–4
fd = 320
PSR T
0 to
PSR R
50 kHz
50 mVPP
4.6 kHz to
100 kHz
2fa – fd
*6
tSD
Digital Output Delay Time
tXD1
tXD2
CL = 100 pF + 1 LSTTL
tXD3
Min.
Typ.
Max.
Unit
30
32
—
dB
—
–37.5
–35
dBmO
—
–52
–35
dBmO
—
30
—
dB
20
—
200
20
—
200
20
—
200
20
—
200
ns
*6 The measurement under idle channel noise
13/18
,
,
¡ Semiconductor
MSM7533H/7533V/7534
TIMING DIAGRAM
Transmit Timing
BCLK
1
2
tXS
XSYNC
DOUT1
DOUT2
3
4
5
6
7
8
9
10
11
9
10
11
tSX
tWS
tXD1
tSD
MSD
D2
tXD2
D3
D4
D5
D6
tXD3
D8
D7
Transmit Side
Receive Timing
BCLK
1
tRS
RSYNC
DIN1
DIN2
2
3
4
5
6
7
8
tSR
tWS
tDS
D2
MSD
tDH
D3
D4
D5
D6
D7
D8
Receive Side
Figure. 1 Timing Diagram in the Parallel Mode (CHPS = 1)
BCLK
XSYNC
DOUT1
MSD D2
D3
D4
D5
D6
D7
D8 MSD D2
CH1 PCM Data
D3
D4
D5
D6
D7
D8
D7
D8
CH2 PCM Data
Transmit Side
BCLK
RSYNC
DIN2
MSD D2
D3
D4
D5
D6
CH1 PCM Data
D7
D8 MSD D2
D3
D4
D5
D6
CH2 PCM Data
Receive Side
Figure. 2 Timing Diagram in the Serial Mode (CHPS = 0)
14/18
¡ Semiconductor
MSM7533H/7533V/7534
APPLICATION CIRCUIT
Example of Basic Connection (PCM Serial Mode Operation)
+5 V
MSM7533
AIN1
GSX1
CH1
Analog Input
AOUT1
CH1
Analog Output
DIN2
DIN1
AIN2
GSX2
CH2
Analog Input
SGC
AG
DG
0.1 mF
0V
10 mF +
+5 V
2CH Multiplex PCM
(Open) Signal Output
0V
CHPS
VDD
2CH Multiplex PCM
Signal Intput
Bit Clock Input
Sync Pulse Input
BCLK
XSYNC
RSYNC
PDN
AOUT2
CH2
Analog Output
1 kW
DOUT1
DOUT2
0V
Power Down Control Input
1: Operation
0: Power Down
1 mF
0 to 20 W
Example of Interface to the Echo Canceller MSM7520
MSM7533
SIN
ROUT
+5 V
10 kW
+5 V
AIN1
GSX1
AOUT1
PDN
CHPS
XSYNC
RSYNC
BCLK
DIN1
DOUT1
AOUT2
GSX2
AIN2
VDD
0.1 mF
10 W
+
SGC
1 mF 10 mF
AG
DG
10 kW
DOUT2
DIN2
SOUT
RIN
+5 V
0V
+5 V
MSM7520-001
RESET
POWER DOWN
+5 V
0V
+5 V
SIN
ROUT
SCK
SYNC
INT
IRLD
SYNCO
SCKO
RST
PWDWN
CKSEL
VDD
SOUT
RIN
NLP
GC
+5 V
HCL
ADP
ATT
VSS
X1
X2
36 MHz CLK Input
0V
15/18
¡ Semiconductor
MSM7533H/7533V/7534
RECOMMENDATIONS FOR ACTUAL DESIGN
• To assure proper electrical characteristics, use bypass capacitors with excellent high frequency
characteristics for the power supply and keep them as close as possible to the device pins.
• Connect the AG pin and the DG pin each other as close as possible. Connect to the system
ground with low impedance.
• Mount the device directly on the board when mounted on PCBs. Do not use IC sockets. If an
IC socket is unavoidable, use the short lead type socket.
• When mounted on a frame, use electro-magnetic shielding, if any electro-magnetic wave
source such as power supply transformers surround the device.
• Keep the voltage on the VDD pin not lower than –0.3 V even instantaneously to avoid latchup phenomenon when turning the power on.
• Use a low noise (particularly, low level type of high frequency spike noise or pulse noise)
power supply to avoid erroneous operation and the degradation of the characteristics of these
devices.
16/18
¡ Semiconductor
MSM7533H/7533V/7534
PACKAGE DIMENSIONS
(Unit : mm)
DIP20-P-300-2.54-S1
Package material
Lead frame material
Pin treatment
Solder plate thickness
Package weight (g)
Epoxy resin
42 alloy
Solder plating
5 mm or more
1.49 TYP.
17/18
¡ Semiconductor
MSM7533H/7533V/7534
(Unit : mm)
SOP24-P-430-1.27-K
Mirror finish
Package material
Lead frame material
Pin treatment
Solder plate thickness
Package weight (g)
Epoxy resin
42 alloy
Solder plating
5 mm or more
0.58 TYP.
Notes for Mounting the Surface Mount Type Package
The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which
are very susceptible to heat in reflow mounting and humidity absorbed in storage.
Therefore, before you perform reflow mounting, contact Oki’s responsible sales person for the
product name, package name, pin number, package code and desired mounting conditions
(reflow method, temperature and times).
18/18
Similar pages