Coilcraft MSS1048-563MLD Shielded power inductors - mss1048 Datasheet

Document 462 -1
Shielded Power Inductors – MSS1048
• 10 × 10.2 mm footprint; 4.8 mm high shielded inductors
• Very low DCR and excellent current handling
Designer’s Kit C409 contains 3 each of all values.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight: 1.7 – 1.9 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 200/7″ reel; 800/13″ reel; Plastic tape: 24 mm wide,
0.35 mm thick, 16 mm pocket spacing, 5.1 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
Inductance2
Part number1
(µH)
MSS1048-801NL_ 0.8 ±30%
MSS1048-152NL_ 1.5 ±30%
MSS1048-222NL_ 2.2 ±30%
MSS1048-332NL_ 3.3 ±30%
MSS1048-472NL_ 4.7 ±30%
MSS1048-682NL_ 6.8 ±30%
MSS1048-822NL_ 8.2 ±30%
MSS1048-103ML_ 10 ±20%
MSS1048-153ML_ 15 ±20%
MSS1048-223ML_ 22 ±20%
MSS1048-333ML_ 33 ±20%
MSS1048-473ML_ 47 ±20%
MSS1048-563ML_ 56 ±20%
MSS1048-683ML_ 68 ±20%
MSS1048-823ML_ 82 ±20%
MSS1048-104ML_ 100 ±20%
MSS1048-154KL_ 150 ±10%
MSS1048-184KL_ 180 ±10%
MSS1048-224KL_ 220 ±10%
MSS1048-334KL_ 330 ±10%
MSS1048-474KL_ 470 ±10%
DCR SRF
max typ3
(m) (MHz)
4.3 180
5.1 90
7.2 70
10.0 50
11.5 38
16.3 35
20.0 28
23.0 24
36.0 20
50.0 12
68.0 11
120
10
126
10
176
7.0
196
6.0
224
6.0
330
5.0
360
4.5
394
4.5
748
3.0
886
2.7
Isat (A)4 Irms (A)5
10% 20% 30% 20°C 40°C
drop drop drop
rise rise
9.60 12.0 14.1
8.19 12.0
5.44 7.80 10.5
7.41 10.8
4.92 6.62 8.40 6.63 9.78
4.62 6.32 7.38 5.04 7.22
4.36 5.62 6.46 4.90 6.90
3.60 5.00 5.94 4.52 6.01
3.14 4.14 4.84 4.38 5.71
3.08 3.84 4.32 3.99 4.79
2.46 3.06 3.44 3.51 4.26
2.36 2.90 3.28 2.86 3.58
1.66 2.14 2.42 2.12 2.80
1.44 1.86 2.20 1.83 2.42
1.36 1.70 1.90 1.71 2.28
1.28 1.60 1.70 1.39 1.88
1.08 1.44 1.64 1.23 1.67
0.99 1.20 1.36 1.09 1.48
0.79 1.02 1.16 0.97 1.33
0.75 0.92 1.02 0.89 1.24
0.67 0.84 0.95 0.85 1.18
0.57 0.69 0.76 0.57 0.82
0.43 0.52 0.62 0.50 0.72
1. Please specify termination and packaging codes:
MSS1048-334KLC
Termination: L = RoHS compliant matte tin over nickel
over copper.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tinlead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (200 parts
per full reel).
B= Less than full reel. In tape, but not
machine ready. To have a leader
and trailer added ($25 charge), use
code letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (800 parts
per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc
using an Agilent/HP 4263B LCR meter or equivalent.
3. SRF measured using an Agilent/HP 4192A impedance
analyzer or equivalent.
4. DC current at which the inductance drops the specified
amount from its value without current.
5. Current that causes the specified temperature rise
from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Document 462-1
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Revised 03/25/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 462-2
SMT Power Inductors – MSS1048
Typical L vs Current
Typical L vs Frequency
1000
1000
330 µH
100 µH
100
Inductance (µH)
Inductance (µH)
330 µH
33 µH
10 µH
10
3.3 µH
0.8 µH
1
0.1
0.1
100 µH
100
33 µH
10 µH
10
3.3 µH
0.8 µH
1
10
1
100
0.1
0.01
10
Frequency (MHz)
Typical Current Derating
0.402 ±0.012
10,2 ±0,3
120
110
100
90
Dash number
123
X
Internal code
Parts manufactured prior
to Sept. 2007 were marked
with only the dash number.
0.394 ±0.012
10,0 ±0,3
80
70
60
0.189 ±0.012
4,8 ±0,3
50
Recommended
Land Pattern
40
30
20
10
0
25°C
Percent of rated current
1
0.1
Current (A)
Isat
Irms
-40
-20
0
20
0.051 ±0.008
1,3 ±0,2
40
60
80
Ambient temperature (°C)
100
0.14
3,56
0.118 ±0.008
3,0 ±0,2
120 140
0.37
9,40
0.311 ±0.012
7,9 ±0,3
Dimensions are in
0.07
1,78
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 462-2
Revised 3/25/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages