Coilcraft MSS6132-823ML Shielded power inductors â mss6132 Datasheet

Document 641-1
Shielded Power Inductors – MSS6132
• 6.1 × 6.1 mm footprint; 3.2 mm high shielded inductors
• Low DCR and excellent current handling
Designer’s Kit C364 contains 3 of each value
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos
bronze (current production) or gold over nickel over phos bronze (prior
production). Other terminations available at additional cost.
Weight 0.33 – 0.38 g
Ambient temperature –40°C to +85°C with Irms current,
+85°C to +125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel, 1500/13″ reel; Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.1 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Inductance2
Part number1 ±20% (µH)
MSS6132-472ML_
4.7
MSS6132-562ML_
5.6
MSS6132-682ML_
6.8
MSS6132-822ML_
8.2
MSS6132-103ML_ 10
MSS6132-123ML_ 12
MSS6132-153ML_ 15
MSS6132-183ML_ 18
MSS6132-223ML_ 22
MSS6132-273ML_ 27
MSS6132-333ML_ 33
MSS6132-393ML_ 39
MSS6132-473ML_ 47
MSS6132-563ML_ 56
MSS6132-683ML_ 68
MSS6132-823ML_ 82
MSS6132-104ML_ 100
DCR
SRF
max
typ3
(Ohms) (MHz)
0.043
65.0
0.048
60.0
0.052
47.0
0.055
45.0
0.070
39.0
0.079
33.0
0.106
27.0
0.118
24.0
0.158
21.0
0.180
19.0
0.250
18.0
0.275
17.0
0.300
16.0
0.380
14.0
0.410
12.0
0.510
10.0
0.660
9.0
Isat (A)4 Irms (A)5
10% 20% 30% 20°C 40°C
drop drop drop rise rise
2.18 2.60 2.84 2.30 3.10
2.10 2.50 2.74 2.20 2.95
1.80 2.12 2.30 2.10 2.80
1.78 2.06 2.22 2.00 2.65
1.36 1.64 1.84 1.90 2.50
1.30 1.54 1.70 1.75 2.35
1.16 1.42 1.56 1.65 2.20
1.04 1.22 1.36 1.55 2.05
0.97 1.12 1.22 1.45 1.90
0.91 1.08 1.18 1.30 1.75
0.81 0.96 1.10 1.20 1.60
0.79 0.92 0.99 1.10 1.45
0.72 0.86 0.93 0.95 1.30
0.61 0.72 0.79 0.85 1.15
0.55 0.63 0.69 0.73 1.00
0.53 0.62 0.67 0.60 0.85
0.45 0.54 0.59 0.50 0.69
1. Please specify termination and packaging codes:
MSS6132-823MLC
Termination: L = RoHS compliant matte tin over
nickel over phos bronze (current
production) or gold over nickel over
phos bronze (prior production)
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) over gold over nickel
over phos bronze or
S = non-RoHS tin-lead (63/37) over
gold over nickel over phos bronze.
Packaging: C= 7″ machine-ready reel EIA-481
embossed plastic tape (500 per
full reel).
B= Less than full reel In tape, but
not machine-ready. To have a leader and trailer added ($25 charge),
use code letter C instead.
D= 13″ machine-ready reel EIA-481
embossed plastic tape. Factory
order only, not stocked (1500 per
reel per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using
an Agilent/HP 4263B LCR meter or equivalent.
3. SRF measured using Agilent/HP 4191A or equilvalent.
4. DC current at which the inductance drops the specified amount from its value without current.
5. Current that causes the specified temperature rise
from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 641-1
Revised 03/06/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 641-2
SMT Power Inductors – MSS6132
Typical L vs Current
Typical L vs Frequency
1000
100 µH
100
Inductance (µH)
Inductance (µH)
1000
22 µH
10
4.7 µH
1
0.01
1
0.1
100 µH
100
22 µH
10
1
10
Current (A)
Irms Derating
4.7 µH
0.01
1
0.1
0.240*
6,1
0.237
6,0 min
120
110
123
90
0.079
2,0
0.240*
6,1
0.237
6,0
0.191
∅
4,85
80
70
Recommended
Land Pattern
60
0.126
max
3,2
50
40
25°C
Percent of rated Irms
100
30
20
10
0
10
Frequency (MHz)
-40
-20
0
20
40
60
80
100
120 140
0.079
2,0
0.220
5,6
Ambient temperature (°C)
0.220
5,6
Dimensions are in
* Dimensions are of the case not
including the termination. For
maximum overall dimensions
including the termination, add
0.016 in / 0,4 mm.
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 641-2
Revised 03/06/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages