ETC1 MTB350HEV Full-size (7.3mm or 4.7mm height) Datasheet

MTA and MTB Series
Full-Size (7.3mm or 4.7mm height)
• Industry Standard Package
• 5.0 or 3.3 Volt
• HCMOS, Sinewave, Clipped Sine
• 1.000MHz to 1.000GHz
• Stability Down to ±1ppm
Electrical Specifications
H Option = HCMOS Output
Frequency Range
Frequency Stability
Load
Supply Current
Output
S Option = Clipped Sine Output
Frequency Range
Frequency Stability
Load
Supply Current
Output
Sinewave Output
Frequency Stability
Load
Supply Current
Output
Z Option = Sinewave Output
Operating Temperature Range
Storage Temperature Range
Supply Voltage (Vdd)
Internal Trim (Top of can)
Control Voltage
Pin 1 Connection
Frequency Stability
Symmetry
Vdd = 5V
Vdd = 3.3V
Vdd = 5V
Vdd = 3.3V
Blank
V Option
vs. Aging
vs. Voltage (with a 5% change)
vs. Load (with a 10% change)
@50% of waveform w/CMOS load
www.mmdcomp.com
Toll Free 1-877-663-2667 / Fax: 949-753-5889
OS15
1.000MHz to 160.000MHz
Down to ±1ppm
10K Ohms // 15pF
35mA max
Logic”1” Level = 0.9Vdd min.
Logic”0” Level = 0.1Vdd max.
8.000MHz to 300.000MHz
Down to ±1ppm
10K Ohms // 15pF
3mA max.
1.0V p-p min.
8.000MHz to 1.000GHz
Down to ±1ppm
50 Ohms
5mA max.
7dBm min.
See Part Numbering Guide
-40°C to +85°C
5.0Vdc ±5%
3.3Vdc ±5%
±3ppm min.
2.5Vdc±2.0Vdc Positive Slope
1.65Vdc±1.5Vdc Positive Slope
No Connect
±10ppm min.
±1ppm per year max.
±0.3ppm
±0.3ppm
40/60%
Specifications subject to change without notice
Revision: 9/20/02 B
Part Numbering Guide
MT
Frequency
14 pin DIP
Supply Voltage
Blank = 5 Volt
3 = 3.3 Volt
Series Option
A = A Series(7.3mm Hgt.)
B = B Series(4.7mm Hgt.)
Frequency Stability*
10 = ±1ppm
15 = ±1.5ppm
20 = ±2ppm
25 = ±2.5ppm
30 = ±3ppm
35 = ±3.5ppm
50 = ±5ppm
Operating Temp. Range*
A = 0°C to +50°C
B = -10°C to +60°C
C = -20°C to +70°C
D = -30°C to +70°C
E = -30°C to +80°C
F = -40°C to +85°C
G = 0°C to +70°C
Trimmer Option
Blank = No Trimmer
M = Mechanical Trimmer
Pin 1 Connection
Blank = No Connect
V = Voltage Control
Output Type
H = HCMOS
S = Clipped Sinewave
Z = Sinewave
* Check with factory for additional stability vs. temperature options
Cut Leads and Gull-Wing are available for this package.
See VA1 and VA3 for specs.
Mechanical Dimensions
#8
15.24 ±0.20
.600 ±.012
0.5
.020
4.0±0.2
.157±.012
18.3 ±0.20
.720 ±.012
Markings
Optional Trimmer
#7
#1
11.7 ±0.20
.460 ±.012
4.7
.185
7.3
.287
MTA end view
9.6 ±0.20
.720 ±.012
5.0
.197
#14
7.62 ±0.20
.300 ±.012
MTB end view
2.4
.094
1.0
.039
Pin Connections
Markings
P i n 1 : C o n t r o l Vo l t a g e o r N / C
Line 1: MMD
Pin 7: Case Ground
Line 2: Part Number
Pin 8: Output
Line 3: Frequency
P i n 1 4 : S u p p l y Vo l t a g e
Line 4: Date Code
www.mmdcomp.com
Toll Free 1-877-663-2667 / Fax: 949-753-5889
OS15
Specifications subject to change without notice
Revision: 9/20/02 B
Similar pages