Fairchild MTC9001300 Dual phototransistor optocoupler Datasheet

MCT9001
Dual Phototransistor Optocouplers
Features
Description
■ Two isolated channels per package
The MCT9001 Optocoupler has two channels for density
applications. For four channel applications, two-packages
fit into a standard 16-pin DIP socket. Each channel is an
NPN silicon planar phototransistor optically coupled to a
gallium arsenide infrared emitting diode.
■ Two packages fit into a 16 lead DIP socket
■ Underwriters Laboratory (U.L.) recognized File
E90700
VDE
approved for IEC60747-5-2
■
Applications
■ AC line/digital logic – isolate high voltage transients
■ Digital logic/digital logic – eliminate spurious grounds
■ Digital logic/AC triac control – isolate high voltage
■
■
■
■
■
transients
Twisted pair line receiver – eliminate ground loop
feedthrough
Telephone/telegraph line receiver – isolate high
voltage transients
High frequency power supply feedback control –
maintain floating grounds and transients
Relay contact monitor – isolate floating grounds and
transients
Power supply monitor – isolate transients
Schematic
Package Outlines
ANODE 1
8 COLLECTOR
8
1
CATHODE 2
ANODE 3
7 EMITTER
6 COLLECTOR
8
CATHODE 4
5 EMITTER
8
1
1
Equivalent Circuit
©2003 Fairchild Semiconductor Corporation
MCT9001 Rev. 1.0.7
www.fairchildsemi.com
MCT9001 — Dual Phototransistor Optocouplers
February 2010
Symbol
Rating
Value
Unit
TOTAL DEVICE
TSTG
Storage Temperature
-55 to +150
°C
TOPR
Operating Temperature
-55 to +100
°C
TSOL
Lead Solder Temperature
(Refer to Reflow Temperature Profile)
260 for 10 sec
°C
400
mW
4.83
mW/°C
Forward Current – Continuous
60
mA
Forward Current – Peak (PW = 1µs, 300pps)
3
A
V
PD
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
EMITTER (Each channel)
IF
IF(pk)
VR
Reverse Voltage
5.0
PD
LED Power Dissipation @ TA = 25°C
100
mW
Derate above 25°C (Total Input)
1.1
mW/°C
DETECTOR (Each channel)
IC
PD
Collector Current – Continuous
30
mA
Detector Power Dissipation @ TA = 25°C
150
mW
1.67
mW/°C
Derate above 25°C
©2003 Fairchild Semiconductor Corporation
MCT9001 Rev. 1.0.7
www.fairchildsemi.com
2
MCT9001 — Dual Phototransistor Optocouplers
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Min.
Typ.*
Max.
Unit
1.0
1.3
V
10
µA
EMITTER
VF
Input Forward Voltage
IF = 10mA
IR
Reverse Current
VR = 5V
CJ
Junction Capacitance
VF = 0 V, f = 1MHz
50
pF
DETECTOR
BVCEO
Collector-Emitter Breakdown Voltage
IC = 0.5mA, IF = 0
55
V
BVECO
Emitter-Collector Breakdown Voltage
IE = 100µA, IF = 0
7
V
Collector-Emitter Dark Current
VCE = 24V, IF = 0
ICEO
5
VCE = 24V, TA = 85°C
CCE
Capacitance
VCE = 0V, f = 1MHz
100
nA
50
µA
8
pF
Transfer Characteristics
Symbol
Parameter
Test Conditions
Min.
Typ.*
Max.
Units
SWITCHING TIMES (AC)
Non-Saturated
ton
Turn-on Time
toff
Turn-off Time
RL = 100Ω, IC = 2mA, VCC = 10V
3
µs
3
µs
tr
Rise Time
2.4
µs
tf
Fall Time
2.4
µs
2.4
µs
25.0
µs
Saturated
ton
Turn-on Time
toff
Turn-off Time
IF = 16mA, RL = 1.9kΩ, VCE = 5V
DC CHARACTERISTICS
CTR
CTR(sat)
VCE(sat)
Current Transfer Ratio,
Collector-Emitter
IF = 5mA, VCE = 5V
50
IF = 8mA, VCE = 0.4V
30
Saturation Voltage
IF = 8mA, IC = 2.4mA
600
%
%
0.40
V
Isolation Characteristics
Symbol
VISO
Characteristic
Input-Output Isolation Voltage
Test Conditions
Min.
II-O ≤ 10µA, t = 1min.
5000
1011
RISO
Isolation Resistance
VI-O = 500VDC
CISO
Isolation Capacitance
f = 1MHz
Typ.*
Max.
Units
Vac(rms)
Ω
0.5
pF
*All typicals at TA = 25°C
©2003 Fairchild Semiconductor Corporation
MCT9001 Rev. 1.0.7
www.fairchildsemi.com
3
MCT9001 — Dual Phototransistor Optocouplers
Electrical Characteristics (TA = 25°C unless otherwise specified)
MCT9001 — Dual Phototransistor Optocouplers
Typical Performance Curves
Fig. 2 Normalized CTR vs. Ambient Temperature
Fig. 1 Normalized CTR vs. Forward Current
1.6
1.4
VCE = 5.0V
TA = 25°C
1.4
1.0
NORMALIZED CTR
NORMALIZED CTR
1.2
Normalized to
IF = 10mA
0.8
0.6
0.4
IF = 5mA
1.2
1.0
IF = 10mA
0.8
0.6
0.2
0.0
0
5
10
15
IF - FORWARD CURRENT (mA)
Normalized to
IF = 10mA
TA = 25°C
0.4
-75
20
-50
-25
0
25
50
75
100
TA - AMBIENT TEMPERATURE (°C)
10
0
1000
IF = 10mA
VCC = 10V
TA = 25°C
VCE = 10V
SWITCHING SPEED (µs)
ICEO - COLLECTOR-EMITTER DARK CURRENT (µA)
10
125
Fig. 4 Switching Speed vs. Load Resistor
Fig. 3 Dark Current vs. Ambient Temperature
1
IF = 20mA
10 -1
10 -2
10 -3
10 -4
100
Toff
Tf
10
Ton
1
Tr
10 -5
10 -6
0
25
50
75
100
0.1
125
0.1
1
10
R - LOAD RESISTOR (kΩ)
TA - AMBIENT TEMPERATURE (°C)
100
Fig. 6 Collector-Emitter Saturation Voltage
vs. Collector Current
Fig. 5 LED Forward Voltage vs. Forward Current
1.8
100
TA = 25°C
VCE (SAT) - COLLECTOR-EMITTER
SATURATION VOLTAGE (V)
VF - FORWARD VOLTATGE (V)
1.7
1.6
1.5
1.4
TA = 55°C
1.3
TA = 25°C
1.2
10
1
IF = 2.5mA
0.1
IF = 20mA
0.01
IF = 10mA
1.1
IF = 5mA
TA = 100°C
1.0
1
10
IF - LED FORWARD CURRENT (mA)
©2003 Fairchild Semiconductor Corporation
MCT9001 Rev. 1.0.7
0.001
0.01
100
0.1
1
10
IC - COLLECTOR CURRENT (mA)
www.fairchildsemi.com
4
Through Hole
Surface Mount
9.18~10.18
(0.405)
9.18~10.18
(0.405)
Pin 1
Pin 1
6.00~7.00
6.00~7.00
3.00~4.00
1.15~1.35
3.00~4.00
4.50
(Typ.)
1.15~1.35
0.35
Typ.
1.00
(Typ.)
2.30~3.30
3.85
Typ.
0.26 Typ.
2.29~2.79
0.40~0.60
7.62 (Typ.)
0.40~0.60
15°
(Max.)
2.29~2.79
0.75~1.25
(Both sides
8.15 (Typ.)
9.86~10.46
0.26 (Typ.)
0.4" Lead Spacing
Recommend Pad Layout for Surface
Mount Leadform
9.18~10.18
(0.405)
Pin 1
(1.50)
(2.54)
6.00~7.00
(1.30)
(10.50)
(7.90)
3.00~4.00
1.15~1.35
4.60
(Typ.)
(1.04)
15°
(Max.)
1.10
(Typ.)
2.30~3.30
2.29~2.79
0.40~0.60
10.16 (Typ.)
0.26 (Typ.)
Note:
All dimensions are in millimeters.
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2003 Fairchild Semiconductor Corporation
MCT9001 Rev. 1.0.7
www.fairchildsemi.com
5
MCT9001 — Dual Phototransistor Optocouplers
Package Dimensions
Option
Example Part Number
No Option
MTC9001
S
MTC9001S
Description
Standard Through Hole
Surface Mount Lead Bend
SD
MTC9001SD
Surface Mount; Tape and Reel
300
MTC9001300
VDE Approved
3S
MTC90013S
Surface Mount Lead Bend; VDE Approved
3SD
MTC90013SD
300W
MTC9001300W
Surface Mount; Tape and Reel; VDE Approved
0.4" Lead Spacing; VDE Approved
Marking Information
1
V
3
MCT9001
2
XX YY T1
6
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
Two digit year code, e.g., ‘03’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2003 Fairchild Semiconductor Corporation
MCT9001 Rev. 1.0.7
www.fairchildsemi.com
6
MCT9001 — Dual Phototransistor Optocouplers
Ordering Information
12.0 ± 0.1
4.90 ± 0.20
0.30 ± 0.05
4.0 ± 0.1
4.0 ± 0.1
Ø1.55 ± 0.05
1.75 ± 0.10
7.5 ± 0.1
13.2 ± 0.2
10.30 ± 0.20
0.1 MAX
10.30 ± 0.20
16.0 ± 0.3
Ø1.6 ± 0.1
User Direction of Feed
Note:
All dimensions are in inches (millimeters)
©2003 Fairchild Semiconductor Corporation
MCT9001 Rev. 1.0.7
www.fairchildsemi.com
7
MCT9001 — Dual Phototransistor Optocouplers
Carrier Tape Specifications
MCT9001 — Dual Phototransistor Optocouplers
Reflow Profile
Temperature (°C)
TP
260
240
TL
220
200
180
160
140
120
100
80
60
40
20
0
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
tP
Tsmax
tL
Preheat Area
Tsmin
ts
120
240
360
Time 25°C to Peak
Time (seconds)
Profile Feature
Pb-Free Assembly Profile
Temperature Min. (Tsmin)
150°C
Temperature Max. (Tsmax)
200°C
Time (tS) from (Tsmin to Tsmax)
60–120 seconds
Ramp-up Rate (tL to tP)
3°C/second max.
Liquidous Temperature (TL)
217°C
Time (tL) Maintained Above (TL)
60–150 seconds
Peak Body Package Temperature
260°C +0°C / –5°C
Time (tP) within 5°C of 260°C
30 seconds
Ramp-down Rate (TP to TL)
6°C/second max.
Time 25°C to Peak Temperature
©2003 Fairchild Semiconductor Corporation
MCT9001 Rev. 1.0.7
8 minutes max.
www.fairchildsemi.com
8
AccuPower
Auto-SPM
Build it Now
CorePLUS
CorePOWER
CROSSVOLT
CTL
Current Transfer Logic
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series
FACT®
®
FAST
FastvCore
FETBench
FlashWriter®*
FPS
F-PFS
®
FRFET
SM
Global Power Resource
Green FPS
Green FPS e-Series
Gmax
GTO
IntelliMAX
ISOPLANAR
MegaBuck
MICROCOUPLER
MicroFET
MicroPak
MicroPak2
MillerDrive
MotionMax
Motion-SPM
OptoHiT™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM
PowerTrench®
PowerXS™
Programmable Active Droop
®
QFET
QS
Quiet Series
RapidConfigure
Saving our world, 1mW/W/kW at a time™
SignalWise
SmartMax
SMART START
SPM®
STEALTH
SuperFET
SuperSOT -3
SuperSOT -6
SuperSOT -8
SupreMOS
SyncFET
Sync-Lock™
®
*
The Power Franchise
®
TinyBoost
TinyBuck
TinyCalc
TinyLogic®
TINYOPTO
TinyPower
TinyPWM
TinyWire
TriFault Detect
TRUECURRENT *
SerDes
®
UHC
Ultra FRFET
UniFET
VCX
VisualMax
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I47
©2003 Fairchild Semiconductor Corporation
MCT9001 Rev. 1.0.7
www.fairchildsemi.com
9
MCT9001 — Dual Phototransistor Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
Similar pages